Change the attributes of file of 'AT' to 'A '.

Similar Questions

• How can I change the attributes read-only or system files?

  How can I change the attributes read-only or system files?

  To view or to remove the read-only or system attributes, use the Attrib command at a command prompt:

  1. click the Start button, type cmd in the search box and press ENTER.

  2. to view the syntax for the Attrib command, Type attrib------? at the command prompt.

  WARNING: If you remove the read-only or a file system attribute, it may seem like a regular folder and some customizations may be lost. For example, Windows customizes the Fonts folder and provides a special folder view that allows you to hide variations, such as bold and italics. It also allows you to change the display settings of the file in a way that is specific to fonts. If you remove the read-only attributes and the Fonts folder system, these custom display settings not available. For folders that you have customized by using the tab, customize the folder properties dialog box, the folder icon and other other customizations may be lost when you remove the read-only attribute.

  If a program cannot save files to a folder with read-only, such as My Documents, change the read-only to the system attribute by using the Attrib command at a command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------.

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command: attrib - r + s c:\test

  Be aware that some programs may not work correctly with folders for which the read-only attribute and the system attribute are granted. You can use the following command to remove these attributes:

  attrib - r-s c:\test

• How to change the attributes on a folder, including all subfolders and files without doing a file at a time?

  Windows operating system.  I get a disk crash and a lot of my restored photos and documents are now set to hidden or read only files.  I would like to reset the attributes of files to remove these attributes, but are not particularly care to do one file at a time.  How can I make a folder at a time?

  Hit,

  This should give you all the information you need on the attrib command from a command prompt window

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/attrib.mspx?mfr=true

  To open a command prompt window.

  • Click Start
  • Click on run
  • Type cmd and press enter

  Post back if you have any other questions.

  Tricky

• How to manually change the DNS zone files?

  I'm running OS X version 10.11.2 (El Capitan) and using App Server version 5.0.15 on a Mac Mini.

  I need to change the DNS Zone files manually because the DNS Server App Manager does not provide a U / I in order to add some elements (such as adding a delegation, etc.).  I use TextWrangler (5.0.2) as editor-in-Chief.

  I found an old post on how to do this here, but the information listed it seems obsolete.

  I was able to find the zone files to:

  / Library/server/name

  as:

  CBI .

  When I try to save or overwrite the db. files, or try to save all the files in that directory, I get an error indicating that:

  "Save the authenticated for this file failed (error application code: 20004).

  Since a window Terminal, if I go to that directory and type:

  Echo hello > temp.txt

  I get:

  Permission denied

  I am logged in using an administrator account.

  Before editing the db. files, I turned off the DNS in the App Server, then exit the server application server.

  What should I do to manually update the db. files?

  These files are protected from root.  You need to elevate your permissions to be able to change them.

  Probably you use a text editor like vi, nano or pico command line.  sudo vi/path/to/file for example.

  Back up the files first to protect against error.  In addition, be aware that Apple can run on some of your changes if you change the.app areas.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• Can I globally change the names of files and or directory to lowercase to uppercase?

  in Windows XP or in Windows 7, globally change the names of files and or directory to lowercase to uppercase?

  A single configuration change probably will not accomplish this.

  Your best bet is probably the freeware "Bulk Rename Utility" program which has a section dedicated to change the case of file names.

  Bulk Rename Utility: <> http://www.bulkrenameutility.co.uk/Main_Intro.php >

  HTH,
  JW

• Problems to change the attributes of the song

  I like having all my podcasts in a list in order to put in order and interlacing different podcasts.  To do this, I changed the album on all podcasts "PodcastList" and change the track numbers so they sort in the order I want.  (I actually did a script in MediaMonkey to do that for me automatically).

  All this worked fine until I added an SD card and has started to keep my podcasts on it.  By mistake, I synced my list in MediaMonkey before that I had changed everything to be in the "PodcastList" album, so now some of my podcasts appear in different lists in the "rocket".  Now I've tried everything I can think to change the album on these podcasts, but it seems whatever I do that the "rocket" seems to remember the original name of the album.

  I manually changed the name of the album on some of these podcasts in MediaMonkey, located on the device (no synchronization involved this time), but when I unplug my Fuze, let him do the thing "Refreshing your media", then plug it back in MediaMonkey, I find that the name of the album was changed to the rear.

  I think that the database of the rocket is cached information.  Even if I delete the files of the "rocket", let 'refresh my media', then put the files they receive in return the original album.  The only thing that I found that can get the "rocket" to "forget" this info is to change the names of files (not the title of the track, the name of the file).

  Is there an easier way to clear the cache of the rocket for some songs, far from doing a reformat of this?  It will take me some time to rename all these files.

  I finally understood what went wrong.  It wasn't the "rocket" that had the problem, it was the way that I was updating my files in MediaMonkey.

  I wrote a script to MediaMonkey in order to Auto-re - number all my podcasts.  It turns out that while I was updating the file information in the database I was not updated on the real files.  For some reason any MediaMonkey synced those files on the SD card in the "rocket" it took the tags on the files, not the tags in the database (although when I sync to the internal memory of the rocket, it was not a problem).  I added a line at the end of my script, re-run on my files, and then removed all of the "rocket" and re-synchronized it.  After that, it seems to work.

  For someone else in the same situation, it's the line that I had to add:

  ITM. WriteTags

  I already had this, but it does not seem to be sufficient when a SD card took part:

  ITM. UpdateDB

  Now, I have both, and it works great so far.

• How can I change the icons of file movie back to screenshots instead of the folder view changing vlc cone already tried

  I have two granddaughters, 5 and 4, who can't read yet, and I did something that I can't fix. I run Win7, Google Chrome, and VLC is my default player. In the past, the icons of file movie (cartoon) were screenshots, and girls can choose what they looked at. Help please, because the girls are old enough to believe that I REALLY want to verbally list the entire (hundreds) of their shows list EVERY 30.60, or 90 minutes.

  Hi William,.

  Please see the link to change the display of files in Windows 7.

  Behavior and change folder views

  http://Windows.Microsoft.com/en-pH/Windows-Vista/change-folder-views-and-behavior (Also applies to Windows 7)

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• How can I change the Extention Office files

  I want to write a poem in 2010 by Microsoft with photo in the Center, save it with a jpg extension, so that I can download this on my FB page.  FB will only accept JPG photo files. But so far I can't find anyway to change the name of file to an image file extension.  Pls help.  Thank you.

  You couldn't record a word in jpg file, what you could do is take a snapshot using the tool:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Snipping-Tool

  And save it in a format that you like.

• Hi, is it possible to change the names of files that export out of indesign while packing?

  Hi, is it possible to change the names of files that export out of indesign while packing?

  For example, I can change the "Font of the Document" folder to export as a "document-fonts"?

  I ask because our naming structure requires without capital letters and no spaces. Spaces are replaced by dashes (-).

  And it would be nice if it was always exported as needed, instead of having to go back and change the names of files.

  Thank you! Much appreciated!

  Which cannot be changed without having a bad effect,. The name "Document fonts" is special. When you compress a file with fonts in a folder using exactly this name, InDesign know that these policies should be open and will be used in the document to the other end. If you name this file anything else, InDesign ignore fonts and the recipient will have to open the fonts manually.

  If you have decided to change the folder names, you will need to do once the package created, perhaps with a script.

• How can I change the unrecognizable FrameMaker file format?  Why has he become unrecognizable after changing the file name?

  I update an existing project in the FrameMaker10, which is located in a structure of book.  I changed the names of the files in the directory, they upgrade 11 FrameMaker and saved.  When I try to add them to the book (whose name I also updated) a problem for some files. When I try t add them to the book file, I get an error message that says that the book file is unrecognizable.  (It allows me to add it, but it appears in the file book with an icon that has a blue "M" in there.)  Why is that happening and how can I change these files to normal FrameMaker files?  Thank you.

  Try to open the problem files using a text editor or viewer of files to see what the first bytes contain. Contains all the binary files valid FM FM 11 in the first bytes of the file.

  During the updating of the books, it is sometimes better just to create a new address book file and add files to it.

  When you rename files in a book, changes at the level of the system will break any links/cross-references between files, so it is always best to use the option rename book in the file to change the names of files FM. This will keep the correct links.

• Change the attributes of resources in GR 11, 2 ASM grid Infrastructure

  Hello
  
  I have two or three never starts automatic start-up located in the crs profile 11 GR 2, can I change the profile of resources to auto_start = always while the cluster is running? or fact cluster will display the parameter ASM_DISKGROUP starts listed of spfile?
  
  Thank you

  Hello

  user9097501 wrote:
  Hello

  I have two or three will never start Autostart located in the crs profile GR 11, 2...

  Let us clarify which component has effect on what it:
  1 profiles/resources src have nothing to do with the ASM starts
  2 auto_start is a resource of src attribute that specifies if the clusterware automatically starts the resource in question after the restart of the cluster server.
  3. the list of parameters init ASM_DISKGROUP names of disk groups that the ASM instance goes up at startup.

  I can change the profile of resources to auto_start = always while the cluster is running?

  You can change the attribute auto_start to the value 'always' online, no downtime is required.

  or fact cluster will display the parameter ASM_DISKGROUP starts listed of spfile?

  No, not this connection between the CBC and the ASM instance. Crs begins the only DSO resource (using the script specified in the resource action_script attribute) and groups of disks listed in the ASM_DISGROUP parameter, will be mounted by the instance ASM itself.

  HTH.
  Kind regards
  József

  Published by: Jozsef on October 21, 2010 21:43

• changing the names of file massively

  Dreamweave can change the names of files massively?
  for example, a series of files named today_001 through today_100 and I want to
  Rename the files through tomorrow_100 tomorrow_001.

  If you have not yet linked to these files in your pages, you'll love this
  renaming utility
  for use outside of Dreamweaver.
  www.1-4A.com/rename

  "marshachan" wrote in message
  News:ff8ccb$GJC$1@forums. Macromedia.com...
  > Dreamweave can change the names of files massively?
  > for example, a series of files named today_001 through today_100 and I want to
  > rename the files through tomorrow_100 tomorrow_001.

• Change the attribute to read-only by using ClientListener?

  Hello friends of the forum...
  
  I created a form with two INPUTTEXT and put them with read-ONLY using an EL made reference to a BEAN called GENERAL Manager
  
  < af:panelFormLayout binding = "#{backingBeanScope.backing_Layout2.panelFormLayout1}" id = "panelFormLayout1" > "
  < af:inputText value = "#{bindings." Modulo.inputValue}"binding =" #{backingBeanScope.backing_Layout2.inputText1} "id ="inputText1"* readOnly =" #{General.BLock} "* / >"
  < af:inputText value = "#{bindings." Proceso.inputValue}"binding =" #{backingBeanScope.backing_Layout2.inputText2} "id ="inputText2"* readOnly =" #{General.BLock} "* / >"
  * < af:clientListener type = "dblClick" method = "activate the" / > *.
  * < af:serverListener type = "activate the" method="#{backingBeanScope.backing_Layout2.activarBloque}"/ > *.
  < / af:panelFormLayout >
  
  
  ClientListener calling Javascript Fucntion:
  
  function Activar (event) {}
  AdfCustomEvent.queue (event.getSource (), "Activar", {operation: "Create"}, false);
  }
  
  
  ServerListener call the method to change the attribute Block of GENERAL bean and also try to update panelFormLayout...
  
  {} public void activarBloque (ClientEvent clientEvent)
  * General.Block = false; *
  General.Operacion = clientEvent.getParameters ().get("operacion").toString ();
  * AdfFacesContext.getCurrentInstance () .addPartialTarget (this.getPanelFormLayout1 ()); *
  }
  
  (the block is static attribute)
  
  After I do dbClick I see general.block change its value to false but inputText don't update!...
  
  
  So, how can I force it to refresh the components when actionListener is trigger?

  Hello

  I think that in this case, you must call

  AdfPage.PAGE.addPartialTargets ()

  in JavaScript

  Frank

• How to programmatically change the attribute of af:message.for?

  < p >
  I would like to know how, if possible, dynamically change the attribute 'for' of the af: message in the code for the validator in my grain of support. In my example below, I would like to change the af: message for the 'txtReportNumber' attribute 'txtCaratWeight '.
  
  I have included an excerpt from the next page
  & lt; AF:panelGroup binding = "#{backing_ReportVerificationCriteria4.panelGroup2} '"
  ID = "panelGroup2" layout = "vertical".
  styleClass = "body_text15" & gt;
  < /p >
  < p >
  & lt; < color = "#ff0000" > af:message < / police > binding = "#{backing_ReportVerificationCriteria4.message1} '"
  ID = "message1", color = "#ff0000" > for = "txtReportNumber".
  < / police > inlineStyle = "font family: Gil without, Verdana, Arial, Helvetica, without serif;" do-size: 15px; color: #FFFF00; make-weight: bold; left margin: 0px; Max-width: 300px; line-height: 5px; < br / >
  messageType = "none" / & gt; < br / >
  & lt; AF:objectSpacer width = "10" height = "10" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.objectSpacer1}" < br / >
  ID = "objectSpacer1" / & gt; < br / >
  & lt; / af:panelGroup & gt; < br / >
  & lt; AF:panelGroup binding = "#{backing_ReportVerificationCriteria4.panelGroup3}" < br / >
  ID = "panelGroup3" layout = "horizontal" < br / >
  inlineStyle = "font family: Gil without, Verdana, Arial, Helvetica, without serif;" do-size: 11px; color: #052149; margin left: 15px; line-height: 14px; "& gt; < br / >
  & lt; AF:outputLabel value = "number of statement:" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.outputLabel5}" < br / >
  ID = "outputLabel5" < br / >
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; "/ & gt; < br / >
  & lt; AF:inputText label = "number of statement:" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.txtReportNumber}" < br / >
  < color = "#ff0000" > id = "" txtReportNumber < / police > ' columns = "20" simple = "true" < br / > "
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; "< br / >
  showRequired = 'false' immediate = "false" < br / >
  Validator = "#{backing_ReportVerificationCriteria4.txtReportNumber_validator}" < br / >
  requiredMessageDetail = 'Both report number and Carat weights are necessary.' < br / >
  required = "true" / & gt; < br / >
  & lt; / af:panelGroup & gt; < br / >
  & lt; AF:panelGroup binding = "#{backing_ReportVerificationCriteria4.panelGroup4}" < br / >
  ID = "panelGroup4" < br / >
  inlineStyle = "font family: Gil without, Verdana, Arial, Helvetica, without serif;" do-size: 11px; color: #052149; margin left: 15px; line-height: 14px; "< br / >
  page = "horizontal" & gt; < br / >
  & lt; AF:outputLabel value = "Carat weight: ' < br / >" "
  Binding = "#{backing_ReportVerificationCriteria4.outputLabel6}" < br / >
  ID = "outputLabel6" < br / >
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; "/ & gt; < br / >
  & lt; AF:inputText label = "Carat weight:" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.txtCaratWeight}" < br / >
  < color = "#ff0000" > id = "" txtCaratWeight < / police > ' columns = "20" simple = "true" < br / > "
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; margin-left: 7.0pt; "< br / >
  Validator = "#{backing_ReportVerificationCriteria4.txtCaratWeight_validator}" / & gt; "" < br / >
  & lt; / af:panelGroup & gt; < br / >
  < /p >

  Hello

  the field 'for' supports the El. So you can use a reference of bean managed to replace the value

  Frank

• Change the attributes of the camera with a .ini file

  Hello.

  I would change some attributes of camera through an INI file, before you run the User Interface.

  The problem is that when I view the values of the modified attributes, they are not changed: it's always the same values as in the case of camera NIMAX.

  In fact, I've logged IMAQdx with IMAQdxOpenCamera, then I loaded the Camera.ini value for the attributes of the camera, and finally, I closed the session with IMAQdxCloseCamera.

  I can't wait to see your ideas!

  Thomas1330

  Hello

  in fact, I solved the problem.

  I used the following function: IMAQdxReadAttribute (session id, ini_pathname)--> only the attributes in the .ini are changed in the file of the camera until I close my program

  Thomas1330