Prevent the synchronization of podcast of position and played state across devices
We're two people with two iPhones who share an Apple ID. Individually, we listen to some of the same podcasts on every iPhone. The status of "done" and the current position of podcast episodes seem to get Sync between phones at least from time to time. We don't want to happen, because we're going to listen to the podcasts individually. I tried to avoid this:
- Settings-> Podcasts-> Podcasts Sync is DISABLED on both phones.
- Podcast synchronization turned OFF for phones on iTunes (Windows).
We do both synchronize with iTunes regularly to update apps, music, etc. One solution is probably to get a second Apple ID, but I prefer not.
Implement an ID separated from Apple. Really.
Tags: iOS Apps
Similar Questions
-
Prevent the synchronization of .htaccess file
Is there a way to prevent synchronization of certain types of files in Dreamweaver 8? Currently, I need to look at the .htaccess like a hawk, so I don't end up with it on my hard drive. It is STILL part of the synchronization process changes or not.
The benefits of being able to skip certain types of files from synchronization extends well beyond my problem. This ability would be useful to a large part of the user base. For example: it's nice to be able to push or get the webserver .zip files, rarely would someone that they are part of the synchronization process. I'm sure you can think of many other cases.
Thank you!.Taken from the help of DW-
Cloaking excludes cloaked files and folders from the following:
Performing operations Put, Get, Check In, and Check Out
Generation of reports
Find new remote files local and newer
Execution of operations within the site, such as checking and editing the links
* Synchronization
--^^^^^^^^^^^That would help?
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
=================="Jack Toering"
wrote in message
News:g6cmro$Buj$1@forums. Macromedia.com...
> Is there a way to prevent synchronization of certain types of files in
> Dreamweaver 8? Currently, I need to look at the .htaccess like a hawk so I
> don't
> end up with him on my hard drive. It's ALWAYS part to synchronize
> process
> If it changes or not.
>
> The benefits of being able to skip certain types of files from
> synchronization
> extends well beyond my problem. This ability would be useful to a large
> part
> the user base. For example: while it's nice to be able to push or
> get
> .zip files from the web server, rarely would someone that they are part
> of
> the synchronization process. I'm sure you can think of many other cases.
>
> Thank you!
> -
I reduced my bars to 2 - on which there are all the buttons of addons, etc. - are more in the bar as well as the field address\search; on the other - the tabs.
When it is resized due to some long URL or something - some end buttons until after the right - in a menu "more tools" - I have to click - then it takes place and I see these buttons.
Or another way to prevent the buttons to darkened. Thank you.
It seems have solved the problem by installing "Classic" theme restaurateur; which allows to combine the tabs and the address field of 1 bar (screenshot).
-
Hello
I have a same problem of the nomination and please help me. Steam gives me this error: https://support.steampowered.com/kb_article.php?ref=2117-ILZV-2837 followed all the steps and the problem is solved just at the moment 24 hours Max tried to change the Windows 8.1 Professional with the company 8.1 of Windows and the same error... at last, I found what the PROBLEM... Steam do conflict with the killer e2200 controller Gigabit Ethernet (NDIS 6 h 30) .
Here is the spec of my laptop:
Processor information:
Vendor: GenuineIntel
Processor family: 0x6
CPU Model: 0x3c
CPU Stepping: 0 x 3
Processor type: 0x0
Speed: 2494 Mhz
8 logical processors
4 physical processors
HyperThreading: support
FCMOV: supported
SSE2: support
SSE3: support
SSSE3: support
SSE4a: unsupported
SSE41: supported
SSE42: supported
Network information:
Network speed:
Version of the operating system:
Windows 8.1 (64-bit)
NTFS: support
Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0
Video card:
Driver: NVIDIA GeForce GTX 860MThe DirectX driver name: nvumdshim.dll
Driver version: 9.18.13.4752
The DirectX driver version: 9.18.13.4752
Driver date: February 5, 2015
OpenGL Version: 4.5
DirectX card: NVIDIA GeForce GTX 860M
VendorID: 0x10de
Device ID: 0x119a
Number of monitors: 1
Number of logical video cards: 1
No SLI or Crossfire detected
The main screen resolution: 1920 x 1080
Resolution: 1920 x 1080
Main display size: 15.04 "x 8.46" (17,24 "diag)
38.2 cm x 21,5 cm (43.8 cm diag)
Main bus: PCI Express x 16
Primary VRAM: 2047 MB
Supported MSAA modes: 2 x 4 x 8 x
Sound card:
Audio: speakers (Logitech G35 Headset)
Memory:
RAM: Mb 16265
Various:
INTERFACE language: English
Microphone: Not defined
Media type: DVD
Total disk space: 310220 MB
More great free block on the hard disk: Mb 234051
Date of installation of the OS: January 1, 1970
Game controller: none is detected
Software installed:
Advanced SystemCare Ultimate 8
Alienware command center
Alienware on-screen display
Hello
Counter-strike: Global Offensive
Dolby Digital Plus Home Theater
EMSB
Game Booster 3
Google Chrome
Update Google Helper
Intel® Trusted Connect Customer Service
Intel (r) components engine management
Intel (r) graphics processor
Intel(r) Rapid Storage Technology
Intel (r) Wireless Bluetooth (R) (patch version 17.1.1449.356)
IObit Uninstaller
KMSpico v9.3.3
Logitech Gaming Software
Logitech Gaming Software 8,57
Microsoft Visual C++ 2010 Redistributable - 10.0.40219 64 x
Microsoft Visual C++ 2010 x 86 Redistributable - 10.0.40219
Microsoft Visual C++ Redistributable (x 64) 2012 - 11.0.61030
Microsoft Visual C++ Redistributable (x 86) 2012 - 11.0.50727
Microsoft Visual C++ 2012 x 64 extra TIME - 11.0.61030
Microsoft Visual C++ 2012 x 64 minimum - 11.0.61030
Microsoft Visual C++ 2012 x 86 additional TIME - 11.0.50727
Microsoft Visual C++ 2012 x 86 minimum - 11.0.50727
NVIDIA 3D Vision Driver 347.52
347.52 NVIDIA Control Panel
NVIDIA GeForce experience 2.2.2
NVIDIA GeForce experience Service
NVIDIA Graphics Driver 347.52
NVIDIA HD Audio Driver 1.3.33.0
NVIDIA installation application
NVIDIA LED Visualizer 1.0
NVIDIA network service
Optimus NVIDIA 17.12.8 update
NVIDIA PhysX
NVIDIA PhysX System Software 9.14.0702
ShadowPlay NVIDIA 17.12.8
NVIDIA Stereoscopic 3D Driver
Update NVIDIA 17.12.8
Updated NVIDIA
NVIDIA 1.2.27 Audio virtual
Overwolf
Qualcomm-Atheros bandwidth control filter driver
Qualcomm Atheros E220x killer drivers
Qualcomm-Atheros Killer Network Manager Suite
Qualcomm-Atheros Network Manager
Realtek card reader
Realtek High Definition Audio Driver
SHIELD streaming
SHIELD wireless controller driver
ST Microelectronics 3-axis digital accelerometer Solution
Start 8 menu
Steam
Surf protection
Synaptics Pointing Device Driver
TeamSpeak 3 Client
5.21 WinRAR (64-bit)When I try to attach cs'a go with my ping wireless network is 200-250 :(((
Please help me
Thank you!!!
Hello. I made this account just to meet you. I tried all the solutions, but my problem was solved after I uninstalled "iobit start menu 8 and iobit advanced system care ' completely and restart my computer. However, I'm also using Killer e2200 controller Gigabit Ethernet (NDIS 6.30) on my pc.
Can you reinstall the driver of e-network killer and all iobit software uninstall your PC and tell me if your problem is solved? I will wait for your answer. Thank you.
-
Why is the synchronization statistics are not Performand and memory profiler?
Hello
I have a Subvi, which I have timed with a stopwatch to 88 seconds, and the Profiler is telling me that the total time is 20 seconds. The Subvi is activated by a button, contains a loop for, and is the last action in the program. Everything is always changing as expected - if I reduce the number of iterations inside the Subvi loop for by a factor of 10, I can measure and 9 seconds with my stopwatch and the Profiler tells me 2 seconds. What is going on? Why is the Profiler to offshore?
Ken
Ken,
AVI playback has a period included widening due to the framerate of the video that you read. If the fps (frames per second) of the video is for example 30, you have to wait between two images 1/30 s = 33.3 Ms during this time of waiting, the Profiler does not show the appellant as active VI. The caterpillars needed time by calling contains only the loop and the call to IMAQ AVI reading Frame.vi. No time the Subvi takes.
If you look in the time taken by IMAQ AVI frame of reading, you won't see the "wait time", as it is once again a function called by this VI...
hope this helps,
Norbert
-
The video is slow to load and play
When I try to play a video or music, it does not play correctly, it is time really slow or just guard stop and start
What I tell you so that you can help me I also have Windows XP 9.0.
My PC was playing very well week last of videos and films, but even not more megavideo has become pretty darn slow I could go on for an hour and it does not load so slightly. What I did wrong in my internet options, or the deletion of cookies. How can I solve this... PLEASE SOMEONE HELP ME BEFORE I LITERALLY BROKE MY PC... And I don't want to do that... but I get frustrated and very PISSED OFF in MY PC... WHEN I chose the wrong settings for my AVG?
JUST FOUND THIS AND HIS WORK AS HE WENT OUT THE BOOX...
1. CLICK ON START
2 CONTROL PANEL
3. INTERNET OPTIONS
4 ADVANCED
5. ON THE BOTTOM OF THE SUCCESS PAGE RESET
THIS WILL RESET ALL YOUR INTERNET SETTINGS... AND IT WORKED...
-
Go to the next image after movie loads and plays
To all,
I try to get my file from master.swf to load a separate film called 'splash.swf' to play at the end of the film "splash.swf" then go to the next section and load the next movie called "home.swf".
what I have so far:
Stop();
dyMCL.loadClip ("splash.swf", 5);
* what I need *.
If (condition) {}
gotoAndPlay (3)
};
Any thoughts?
Thank you
KyleOK, so that work very well! I made a few changes, but everything works. Thanks for your help!
dyMCL.addListener (this);
dyMCL.loadClip ("splash.swf", 5);
function onLoadInit(mc:MovieClip) {}
dyMCL.removeListener (dyMCL);
checkFrames (mc);
}
function checkFrames(mc:MovieClip) {}
mc.onEnterFrame = function() {}
If (this ._currentframe = this ._totalframes) {}
_root.gotoAndStop (3);
load home.swf
delete this.onEnterFrame;
}
};
} -
Change the order of Podcast episodes
Hello. I wish I had my eps podcast playing high down, as right now the ep albums is number 67 but I would so he could play at the 1 and keep going down. Is there a way to do this? I went to iTunes, click on the tab release date for the podcast and it reversed, then I synced and then ejected, but when I open it in my classic ipod, they always start at 67. I don't know what else to do. Thank you.
Unfortunately, the only way to play the classic Podcast episodes in the correct order is to put them in a playlist in the order you want them to play. (I know, why anyone would design a menu that time dated material only in reverse-date order?) He has no sense!)
- These are audio podcasts, you should be able to create a playlist on your iPod On-The-Go and use this selection.
- Videos must put in a playlist in iTunes and then sync them to your iPod. They can then be played as videos on the classic, navigating in the Main Menu for Playlists of videos and Video or the video playlists section.
- If you put videos in a playlist On-The-Go , they will play only the audio.
- If you play a video, listed as part of an audio Playlist, then once again, it will play only audio content.
- If an audio Playlist contains videos, videos only also appear in the playlists video positions and play as a video.
Complicated, huh?
-
Windows Media-Play list. When I try and play it says that it cannot find the usage rights
I recently had my computer repair, my music files are still on the computer but when I try and play it says that it can't find usage rights. How can I find these and restore them.
original title: list of Media-Play of Windows.
Hello
Method 01:
I suggest you follow the link and check.
http://support.Microsoft.com/mats/windows_media_player_diagnostic
Method 2:
Try the remedy proposed below and let us know if it works for you.
(a) click on the Start menu, choose all programs, then Accessories, and then right-click on the element of the command prompt and select run as administrator
(b) click on continue to allow it to open a prompt with administrator privileges
(c) run this command at the cmd prompt: sfc/scannow
(d) the cmd prompt should list text stating "start system analysis. This process will take time. »
(e) wait for the scan to complete (this may take several minutes, so be patient). This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions
(f) when the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct
(g) if any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct errors
(h) after the correction of the errors that are found, try to use Windows Vista Media Player again.
I suggest you to follow the links and check out them.
Solve problems in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
The Player Windows Media DRM: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-DRM-frequently-asked-questions
-
Why Microsoft Virtual PC comes with Reboot and select proper boot device?
Hello
When that I start Microsoft Virtual PC 2007 it comes up with the following error message:
Reboot and select proper boot device
or insertion of the in the selected boot device bootable media
How can I fix it?
I am running Windows 7 Professional 32 - bit.
Any help?
You have installed an operating system on the virtual device?
You have created a virtual machine. When you start it, it will try to start.
There is nothing on the virtual drive so that the system asks to find a bootable floppy
disk or CD/DVD.If you still need help, you can post in the Microsoft Virtualization forum listed below:
http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threadsSincerely,
-
Original title: sandisk
I plugged a sandisk in 1 of my usb ports and my computer is Beeping at me all day, even with the unit unplugged, and when I went to devixes and printers, he tells me to right click on the device icon and everything I installed my TOUCH screen. so, how do I right click (touch) the icon? AND how can I STOP the beep of thia?Hi Marsha,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, it looks like you want to disable plug and play audio.
I suggest you to read the following steps to disable Plug and Play audio.
a. right on the icon of the computer located on your desktop or in the Start Menu. Then select Manage from the drop-down list.
b. in the computer management window, go to "system-> Device Manager tools.
c. on the view menu, select 'show hidden devices '.
d. expand the list of devices under "-pilot no Plug and Play", and then select beep.
e. right click on the element to beep, and then select Properties.
f. in the 'Beep properties' window, go to the driver tab.
g. in the startup section, scroll the list Type, select Disable and click the OK button.
Touch screen refer to the following Microsoft article:
http://Windows.Microsoft.com/en-us/Windows7/using-touch-gestures
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
Reboot and select proper boot device or insert boot media in selected boot device and press a key
I have an Asus UX31 of Zenbook ultrabook. It is running Windows 8, I installed it via download, is not a physical disk.
Recently, I ran Windows Update and he knew as usual, until the time of reset. It restarts, showed on the screen "install updates", but then finally started only the following error message:
"Reboot and select proper boot device or insert boot media in selected boot device and press a key.
As mentioned, I don't have a disc, my ultrabook is not a hard drive. Internal storage only that there is a 128 GB SSD. I went into the bios and check the boot settings and the SSD is correctly listed as the only option to start.
I can only assume some question that's happened with the update of windows. I'm not sure of how to proceed now? ATM, I only have a weight £1000 :/
Hello r,.
Thanks for posting your query in Microsoft Community.
By the description of the problem, I understand that you have problems starting from the computer to the desktop screen, it gives the above error message.
I imagine how it could be frustrating when things do not work as expected. I appreciate your efforts to solve this problem.
As this problem occurred after installing Windows Update, this could be the reason for the incompatible driver installed with the Windows updates.
As you have already checked the settings for starting a disc SSD set correctly, I suggest you disconnect all the external device and restart the computer, check if are able to boot to the desktop screen.
We will try the following methods and check if it helps.
Method 1: I suggest you create USB recovery media as your laptop doesn't have the DVD Rom.
If you're having problems with your PC, a recovery USB disk can help you troubleshoot and fix these problems, even if your PC does not start.
Create an installation media for Windows 8.1
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-mediaMethod 2: Once you create USB recovery media, auto repair:
Follow the steps below to perform an automatic repair:
1 restart the computer, wait for the logo of the manufacturer to check the option of start menu, it will usually F12.
2. the start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.
3. restart the computer, when appears the logo of the manufacturer, continue to press the Boot option menu key to enter the boot menu and change the option to boot in DVD ROM.
4. Once you start your computer by using Windows 8 DVD or system repair disc, a black screen appears with the gray text "press any key to boot from CD or DVD". Press a button on any.
5. Select the exact time and the type of keyboard.
6. click on repair your computer in the lower left corner.
7. click on troubleshooting, advanced option and then click on auto repair.Hope this helps, please reply with the status of the question to get help.
-
I see conflicting information about Firefox for Mac OS. It works on my Mac OS X desktop.
What is the official position?
If Firefox is not available for iPhone and iPad, is such a product in the pipeline?Sorry, that Mozilla has no plan for a version of Firefox for iOS devices. Regarding the Firefox sync service, Mozilla has interrupted the application for some time ago iOS devices, but Favorites on the Go app took what Mozilla has created for iOS and synchronization service. Unfortunately, Firefox 29 has a new version of sync that is not backward compatible, so on the go bookmarks must be updated to work with the new version of Sync.
I think that the major problem between Apple iOS and Mozilla's 'walled garden' approach Apple software running on their devices and approach open source Mozilla to the software.
-
I was installing updates of windows and the computer is dead in the middle of it. When I turned it back on it brought me to a blue screen with error codes: 0x0000007B (0x80399BB0 0 x 0000034 0x00000000 0x00000000). It prompted me to do a system restore or to get to the system recovery, however it shows that there is no available restore points (even though I know that there are a bunch of them... because I checked this before I tried to make the updates of windows). I went into the system recovery & the scan of my system with a scan of the additional memory, and there is nothing wrong with my real hardware. The error recovery of the system that was given to me after the scan of my system is "a fix prevents the system to start.". I looked at different positions in line with methods to get around this, but none of them does not seem to work. Vssadmin does not appear on my system to try to use it again.
I also tried cela http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/8b3e2550-c174-486f-b5dc-98260abc05f9, but as I mentioned before all my restore points have disappeared and when I try not to make method 4 there is no pending.xml file and these registry entries do not exist: HLKM\Offline Components\AdvancedInstallersNeedResolving, HKLM\Offline Components\PendingXmlIdentifier.
I'm almost done try all this and ready to make a fresh Windows... Install but I hate to really do this knowing that everything was working fine before all this & my hardware is fine... If I could just figure out how to get rid of this darn update all this hangs then all would be well. Anyone have any suggestions?
Thanks in advance,
Phatty
Hello
When a computer dies in the middle of an update, it often corrupts many system files leaving no other choice than to reinstall. This is why it is always recommended that laptops/notebooks be connected when you install updates. If Windows was trying to replace a critical system file when the power is off, there are very little that you can do to fix it. If possible, start with a system for the Recovery Console disk and try running "sfc/scannow" to correct or replacement of the damaged system files, but does not satisfy, you are faced with a relocation.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
How to remove documents and data in the iphone app podcast 6
I know how to remove each podcast, but how do I remove "documents and data" in the application of podcast? I have more than 4 GB of data and documents.
I think I found a thread that is useful for you: https://origin-discussions-us.apple.com/thread/6822791?start=60 & tstart = 0
Sonny3301 answer worked for me, «...» "(The steps are: 1) download the Battery Doctor app on your iPhone (it's the first one that appears in the search) (2) hit the"Junk"icon on the bottom and tap 'Clear Cache'." (3) repeat until your space becomes available. The people that I learned this technique of some other bulletin board said it took 10-15 tries; It took me + 30 attempts. The memory savings start small at first, then it starts to hit hundreds of MB at a time. It sounds crazy, I know, but I went to have less than 200 MB of free space for 3.6 GB. Great thing, it was my podcast app had only been hogging to 1 GB of data, so the app battery doctor found 2.6 Go elsewhere. Good luck to you all and you are welcome. »
Maybe you are looking for
-
GIFs that work in FCP 7 does in FCPX - why?
Hello GIFs I downloaded on the internet and who worked in FCP7 do not work in FCPX. Why and how can I make it work. One example is a twirling DNA helix. It doesn't twirl when played. The best Elmer
-
limit of cellular data option isn't available
Hello I want to set an upper limit (maximum limit) to the amount of data that my phone use per month. Under settings of-> data usage, the only option I have is to pass the data cell/turn it off completely, but no sliders etc. appear. Am I missing som
-
Satellite P70-A-104 - no available in Windows virtualization technology
HelloMy problem is that Intel virtualization technology is not enabled on my Toshiba Satellite P70-A-104. I have selected in Bios options: Virtualization VT - X only, but in windows 8 x 64 Technology intel fact processor detection utility appear that
-
Windows Vista How missing hyberfil.sys can be created?
-
Please give me the link to download windows 7 Home premium OA X 16-96072.
Please give me the link to download windows 7 Home premium OA X 16-96072. I have the product key. Give me trial (commercial version).