Disable plug and play audio

Similar Questions

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I disable USB Plug-and-Play?

  Whenever I plug a camera into my USB port, Windows 7 treats as it has never been plugged in before.   When I plug my iPhone or iPad to synchronize with iTunes, Windows 7 starts trying to reinstall the drivers for it even though I just unplugged it five minutes ago.  When I plug my mouse, I get the same thing.  I use a laptop for the convenience of being able to unplug everything, put it in a bag and take it with me.  It is ridiculously annoying having to wait five minutes or more to start using my mouse whenever I put in place somewhere else.  Have to restart iTunes every time I plug in my phone, because Windows decided not to recognize the device even when I had just plugged in a minute there is delayed.  It is a stupid feature, and anyone he designed by default to this mode should be fired for being a fool.

  (1) you cannot disable

  (2) but you can disable the USB plug and connect service

  (3) START - RUN - type SERVICES. Enter MSC

  (4) in the right pane, find PLUG-AND-PLAY, then right-click, choose Properties

  and then MAKE some disabled

  (5) reboot your system

  (6) before the opening of the session, go to the BIOS settings, select USB controllers all THE

  (7) download and install latest correct chipset driver for your model of motherboard

  website of motherboard

  Good luck

• Need a transcript of Plug - and - Play foot pedal compatibility for licensees / Cancer stricken Transcriber

  Apparently, I need something called a "connector plug-and-play" so I can use my pedals to navigate through a test of medical transcription dictation using Express Scribe for audio and Windows Media Player to the foot pedal. I don't know if I have all that right.  That is this connector, I just plug it into a USB port and where can I get one?

  PS - I'm a medical transcriptionist (through speech recognition and low patient census) try to pass a test to get a job to save my life. I am also a patient suffering from cancer, so I need a job soon because my insurance COBRA spikes to $645 / month in three weeks. Can you help me?

  All the information you need is here.

• Does not, XP 8176 controller plug-and-play

  I have a system controller 8176 under XP. OR PXI-devices are not detected plug-and - play. Last XP and OR corrections updated. The system has 512 MB of ram and > 10 GB of free space on the disk. No "yellow marks" ion device with the exception of the PXI advice Manager.

  I have several different devices PXI, 6608 timer, 4461, etc. 5406. None are detected PNP.

  This works: => Control Panel Add material etc.

  Device Manager-online-online 'New Hardware Detection' data acquisition devices does not work

  Whenever I put to update MAX, all PXI devices date back to be undetected, with a yellow exclamation point in Device Manager and MAX the device has an 'X' mark and a symbol of the plan.

  Repeat Controll notes-online hardware etc add the hardware and then things work very well from there once again.

  I tried to remove all cards except the 6608 timer, but it is still not detected.

  Any ideas? Is it possible that I miss some of the software components?

  Thanks in advance

  It was just the XP "Plug and Play device host Universal" service that had been disabled...

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plug-and-Play drivers MIDI does not

  So, I recently bought a Vestax VCI-100, which is a feature of MIDI USB plug-and-play. Connect to my PC, it runs the dialog add new material, looking for drivers. After awhile, he gives up and says that it cannot find the drivers, which is strange because the device is supposed to be plug-and-play. It also happened a while back with a MIDI keyboard USB Generic. However, I have a keyboard more advanced (a M - Audio Axiom 49) that has its own custom driver that works very well. It's almost anything requiring the drivers of default plug-and-play MIDI which doesn't seem to work.

  What I discovered in my own extensive research, is that often this problem is caused by drivers Logitech Webcam creating inappropriate filtering at a level of register (my terminology may be a bit off here, lets say that I am an "intermediate" user). Unfortunately although I've never installed Logitech Webcam driver and I scanned the registry and cannot see any sign on the suggested potential cause.

  I also note that user; http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/8d33026c-f5a7-4fe2-8839-6cbdb04c5d6f complain of similar problems, that he believes was caused by its instalation of ProTools. Too, I have Pro Tools on my machine and during the inspection, Miss me the file "wdma_usb.inf". However, my Pro Tools installation is up to date, but the file is still missing.

  It is by far my best leader on what is causing this problem, but I don't really know yet. I would avoid a complete reformat if I can help it, but I can't find a reliable source for the correct version of this file. Can someone provide me with this file an instructions on how to install it? In addition, advice or suggestions are more than welcome.

  Thank you in advance, this has been frustrating me for quite awhile.

  Hi, Ben Murphy,.

  I found the following information on the site Web of Vestax:

  http://help.Vestax.co.jp/en/detail.php?id=110&id_page_url=83

  It seems that this only is not supported by Windows 7, but there is a possible workaround solution.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Blue screen: Plug and Play detected an error, probably due to a bad driver?

  Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

  I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

  Hi,                                                      Part 1 of 3
  (There is a 4 part added)

  These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
  can also post information that you store in a message in these forums.

  You can solve this a bit on yours with these little free programs.

  1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
  the time.

  2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
  or stop the BlueScreenView Codes.

  3. look for the code on FaultWire - ago usually excellent solutions.

  0x00000000 to 0x00000003F
  http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

  0 x 00000040 to 0x0000007F
  http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

  0 x to 0x000000BF 00000080
  http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

  0x000000C0 to 0x000000FF

  0x00000100 or higher
  http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

  4. position the BCCode or stop Codes, settings, the Cause and related information in a message
  detailed in this forum for assistance.

  ---------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =============================================

  Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
  With time MyEventViewer TRICK is very simple to check when the BSOD.

  Partial screenshot of BlueScreenView (first 1/2 page)

  

  ============================================
  
  Partial Screen Shot of BlueScreenView (second 1/2 page)

  

  =======================================================

  Double-click the line to dump high component file or file - properties with it highlighted.

  

  =======================================================

  Double click on the bottom panel line of file name or file - properties with it highlighted.

  

  Right-click on a line - report HTML Selected Items.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Number of processors	Major version	Minor version
  041110-22218 - 01.dmp	2010-04-11 22:42:11	NTFS_FILE_SYSTEM	0 x 00000024	00000000' 001904fb	fffff880'065a7bd8	fffff880'065 has 7430	fffff800'02c7c0c4	NTFS.sys	NTFS.sys + 213d8	NT file system driver	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6000.16386 (vista_rtm.061101 - 2205)	x 64		2	15	7600

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Plug-and-Play and DEP stop computer

  Randomly, my computer tells me that there was a problem with the Plug-and-Play and Data Execution Prevention must shut down and restart windows. This happens everytime I turn on my computer in 10 minutes, even if I do not open a Web page. I ran scan from Microsoft, Windows Defender, and Norton Antivirus. No virus or detected problems. This just started 3 days ago. I have not recently downloaded any new program. Does anyone know how to fix this?

  Hello

  You could try a system restore before it starts HOWEVER I wouldn't back to. better to solve
  the question because if you perform the restore you may lose the changes you have made and the problem is likely to
  come back. The onlyreason I mention this so that you know the possibilities if someone else
  He suggests here or via other communications you might try. System Restore is ok on some points, but
  last resort for this one.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  You said Norton and it could well be part of the problem. You others have on this machine EVER?
  (Windows Defender and MRT Scanner are fine).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• What is the reliability of Plug and Play in Windows 7?

  What is the reliability of Plug and Play in Windows 7? I mean he came in windows in Windows 98. Sometimes, when you plug a USB device, you may need a set of 60 seconds to restart your computer. Our company become lazy 60 seconds is too long to wait to use a USB device? It might be a good improvement in the next generation of Windows operating systems, but is it reliable, Plug and Play in Windows 7? Any ideas?

  There is a finite amount of drivers that can be incorporated into Windows such as Windows recognizes the device. In addition, device manufacturers must submit the drivers to Microsoft to incorporate into Windows at construction time. Out of the box Plug and Play does not work for all possible configurations of hardware.

  Windows 7 Service pack 1 is released in 2010, the last chance for drivers to be incorporated into the build. Devices with their own hardware ID, which were released after the construction cannot be identified automatically and must, by definition, provide the required drivers for the start install but after that, they should recognize the device automatically. Although the USB 3 specification has been ratified by little around the time of the release of Windows 7 more material supporting this specification came out that shortly after. Windows 7 does not natively support USB 3.

  Windows 7 of Plug-and-Play support works very well, but depends on the hardware manufacturer provides drivers reliable and other support files when it comes to new hardware. Your problem is not with Windows, but your reception units. Windows 7 is now disabled standard support.

• My CAD U37 USB Microphone will not work supposed to be Plug-And-Play.

  I recently bought the microphone she appears under windows 7 as 'C-Media USB Audio Device' as it is supposed to, but it can't find the drivers. I talked to the developers, and they said that it meant to be plug-and-play drivers are native to windows.

  I plug it into my laptop which is running XP and it works very well.

  I tried all usb ports I have, I unplugged everything just got the mouse/keyboard and the monitor.

  Nothing seems to work, please help.

  Hello

  Please contact Microsoft Community.

  I suggest you follow the suggestion provided by Rajesh Govind responded on 19 March 2013 from the link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/my-headset-microphone-not-working-in-Windows-8/f4f1ad12-E7EA-4FFB-ac88-df5eed3298e6

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Problems with the Realtek and Plug-and-Play driver

  Until recently, I noticed a red circle with an X in it by the sound on the taskbar icon. When I switch on it it says no audio device installed and when I go into the Device Manager there is a yellow triangle on my Realtek High Def Audio Driver. When I click on it I get this error:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  The Plug-and-Play driver also seems to give me the same exact error (Code 52) and has the yellow triangle next to him as well.

  Hi Eric,.

  This problem occurred if the driver can be signed or corrupted.

  I suggest you go to the Web to Realtek site, download and install the drivers by selecting the right device.

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know if you have other problems with Windows in the future.

• The plug-and-play USB mouse will not work on Satellite A100

  Hello

  I have a laptop Satellite A100 laptop and when I try to install a plug and play mouse windows says it is not recognized - unknown device.

  Please help the mouse works.

  Thank you very much

  Hello Jayne

  It will be really interesting to know where you're trying to connect the USB mouse. Can you send description of mouse models please?

  As I know it is not necessary to install a driver for external USB mouse and mouse is usually recognized automatically. Please check if a driver installation is needed, and even request delivered must be preinstalled.

• Plug-and-play driver needed

  Hello

  have some problems with the plug-and-play driver - can not update, as it "works fine and any updates do not need" according to windows. But is that the plug-and-play driver problem is the reason for sound, webcam and some other functions do not work properly. Also can not find the plug & play driver among the drivers in the other. Can anyone help with this issue?

  Hello

  Sorry, but I don t know what you mean with the plug-and-play driver. What part of the hardware, you need another driver?

  In addition, it would help if you post your model correct portable operating system.