A problem with your computer prevents the VAC system. You can not play on secure servers.

Similar Questions

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• Only windows 7 can set the image of the user that appears in the start menu you can not change it. True or false?

  Is true or false. Only windows 7 can set the image of the user that appears in the start menu you can not change it.

  Set to false.

  Type the user accounts in the start search box.

  Press ENTER.

  Select change your image.

  Browse the picture than what you want.

• Event Viewer windows will cause problems with your computer

  Windows Vista Ultimate: Will be the windows event viewer are causing problems, such as freeze ups, slow down, with your computer?

  There is never for me, and I never heard him make.

  I hope this helps.  Good luck.

• Windows XP, when the use of twitter can not play more error clips vid 'her browser doesn't support video playback', but if I take the Utube link can play w/browser

  Most imbended videos in Twitter doe not play, if I pop the link out and find on youtube, he plays very well. All in the same browser of Firefox on my old Win. XP machine. Seems to be worse, suspect it has something to do with HTML5 but don't know how to check or update to a good player. And maybe a few interactions w/twitter how to isolate. even before trying to start the video see 'this browser does not support video playback' through the image of the video in twitter mssg. THX

  See the new response below on the use of the plugin Adobe Primetime play video Twitter and respond with your experiences.

  Oh, Yes, still the headaches...

  On Windows XP, Firefox is unable to decode MP4 media. On newer versions of Windows, it can use Windows Media Foundation, but Microsoft has ever released for XP. Thus, sites that have begun to use HTML5 with MP4 media video player - and do not automatically switch to a plugin like Flash when necessary - do not work in Firefox on Windows XP.

  The last time I tried to find a workaround solution was in May and I gave up in frustration: video look a problems with Firefox.

  I hope someone else can take a new look.

  In the meantime, you can:

  • complain to Twitter
  • Look for any new modules that might help: https://addons.mozilla.org/firefox/extensions/

• my laptop shows me a message, solve a problem with your computer

  I m using hp compaq computer laptop

  Do you have your PC crash or some applications a problem before?

  It does not appear if there is a problem detected in your PC and Windows may ask you to send more details about it. In Windows 7, these solutions will be at the center of the Action and in Windows Vista, it is at the centre of problems and solutions.

  It could be any problem not a specific.

• Hi, thanks for making me signed in - finally. Now, after the upgrade to the latest Firefox, I can not play videos. Addons & pluginns all turned on and up to date.

  Hello
  I was struggling to connect to the support site yesterday and while this problem has been resolved, I was advised to upgrade to the latest version of Firefox from the system noticed that I was using an old. I was using Firefox 33 without major issues or problems at all. However I went ahead with the update, which gave me the 34.0.5 version. If good so far until what I went to play some of my regular TV series, I had followed with the previous version, only now he would not play at all.

  I know these TV series, comming from abroad might contain some harmful content to my machine or others, but I am well covered and as I say earlier they were playing fine in the previous version of Firefox. Just earlier the same day.
  

  I will be grateful if you could throw some ideas in this.

  Concerning

  J.Verano

  HI Juanverano,
  Is not a problem, Mode safe mode disables acceleration addons and hardware. If this continues and it is not an add on what will be the next step to try to disable acceleration:

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• I deleted the partition system, pure can not install Win 7 Pro because of the error message

  So, I tried to install Windows 10 on a friends old PC (acer aspire 5920g). I bought a new SSD and traded with the HARD disk, performed a clean install of win 10 and realized that I should return to Win 7 after that too many things were not working well. So, I formatted the disk (230 GB) and system reserved partition. (I took the SSD and put it in an external enclosure that I have connected to my PC to 10 Win.)
  I didn't know much about this system reserved partition but read that it didn't really need when you want to perform a clean installation of another OS. After the partition reserved for formatting system, he said 500 GB of unallocated space. I didn't quite understand that the reader is a 240 GB Sandisk SSD. I put the other (230GB) partition to active and primary with the management tool disc to win 10.
  I put in the Win 7 DVD and change the setting of this kind it would be DVD first the bios startup. However, the Win 7 installation dialog does not appear at all. Instead BACK gives me this message: 'an operating system not found. Try disconnecting all drives that do not contain an operating system. Press Ctrl + Alt + Delete to restart. »

  I tried different startup commands but did not get any result. What should I do next? How can I make a simple clean install of Windows 7 Pro (on the new SSD)?

  There are no problems reported by those who follow these steps for a Clean install Windows 10 Upgrade

  then you might want to try again and this time stick to these steps.

  Otherwise clean reinstall Windows 7 you can turn on with the installation media checked in the player by pressing F12 to Acer to get a Boot Menu, choose the bootable media, custom Setup, to the selection screen of disc to remove all partitions until the unallocated space, and then click next to leave automatic formatting and start the installation.  With the Installer do the partition creation and formatting avoid you unnecessary problems second guess the necessary system partitions and you can ignore all this.

  All the other things you did remove the HDD to format in another PC were unnecessary because that's all that is needed.  If other installation problems arise when it's properly you must follow these additional steps to fix failed Installation Windows 7 , that cover all possible problems.

• Windows has someone calls about problems with your computer sendingout of information on the internet?

  someone called said they where windows form and they said my computer sends information on the internet and they tried to direct me to fix it is this really windows or a scam?

  someone called said they where windows form and they said my computer sends information on the internet and they tried to direct me to fix it is this really windows or a scam?

  Old age scam tactics. The crooks simply change the labels, even poison.

  Ignore and hang up calls.

• Windows calls home to tell you that you have problems with your computer

  I get phone calls from windows

  I get phone calls from windows

  It's a scam. How does Microsoft know that you have a problem? Hang up on them the next time they call. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• problems with laptop computer on the new Lightroom download

  Hello! I bought a prepaid card and I used it to download lightroom on my laptop. He worked a lot on my pc, until about a year later, I received a macbook and downloaded lightroom. I have the trial version free on my mac and then clicked on software license. I typed in my redemption code and it doesn't have a valid redemption code or something like that. How can I get the full version that I bought on my new laptop?

  Use your license lightroom serial number by clicking Help > sign in/activate/license

• There is a problem with your computer works to automatically turn off this message

  [1021 / 023637:WARNING:backend_impl.cc (1609)] Messed up entry found.
  [1021 / 023637:WARNING:backend_impl.cc (1895)] Destroying the invalid entry.

  What model of laptop are you using and what operating system?

• Problems Vista start up, please help out if you can

  I have a HP Pavilion dv4, vista 64 bit home
  It is only a month
  This problem came out not the case, I stop the machine from the menu start normally
  the next morning I started it upwards to get a box of "Startup Repair" pop up on the screen right away and he said "research issues", then another box pops up saying "Startup Repair cannot repair this computer automatically, sending more information can help microsoft create solutions", then he gives me the choice to send information or not so I clicked Yes to send information about this problem, so it has a box that says "Windows cannot repair this computer automatically and it gives me the possibility to each veiw diagnostic and repair details or view advanced options for system recovery and support, I tried to do a system restore to an earlier date, but he let me only to restore my 'Sytem C»» ":" drive my "Recovery D:" and my "Boot X:" both say "this disc is not in the selected restore point" someone tried to help me find the problem but not lucky I'm able to open a command prompt, if that helps in any way, im in no hurry to fix it because I don't need the computer immediately , but he was sensitive on this subject files that I am really upset if were lost, although I doubt that something wrong with the c: drive it seems that something is wrong with the boot drive, but that's why im here, if the experts can help you as soon as possible it would be greatly appreciated.

  Hello danielingalt89,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and want to save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Have you tried to make the clean boot before installing this update. There could be interference or a program context prevents the installation of this update. If you have please ignore this information.

  Clean boot

  We will also test in a clean boot environment to see if this issue is related to interference from other services / programs:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7 log on to your account.
  ---------------------------------------------------
  Click on start-> all programs-> Windows Update and reinstall the update you mentioned previously.
  ---------------------------------------------------
  To restore your Normal startup:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Normal startup.
  3. When prompted, click on restart.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got a phone call from a benny edwards who said Microsoft and had found problems with my computer.

  * Original title: defraud my computer

  I got a phone call from a benny edwards who said Microsoft had found problems with my computer and the pirates had gotten him. As I have had some problems recently with the computer, I thought it was authentic and fell for it? After a long telephone conversation, he forced me to accept that my Bullguard anti virus and my malware Remover is not enough to protect the computer and forced me to buy a program from Microsoft (this man of course) not microsoft. It supports the remote computer, and then forced me to give him my details, name, address, telephone number and age and of course the fool that I am, my credit card number, the penny dropped when he asked the Envoy of money via western union.  When I told her that I was closing the phone call, he told fort and wiped a number of things from my computer, the computer wasn't sure.  I ran my scanner (twice) bullguard, run my anti malware program, changed my password and order my credit card, is there something more I can do?

  To protect yourself, your information and your PC, follow these steps:

  • Change your computer password, change the password on your main email account and change the password for all accounts, including your Bank and credit.
  • Immediately scan your PC with the Microsoft Security Scanner to see if you have the tools malicious/phishing software installed on your PC.
  • As a third step, I recommend that you run the verification of Security Essentials on this page. The check will ensure that the security features in Windows are normally very active and running.
  • Personally, I have a clean Windows installation, because something could have been tampered with.

  For more information, visit the Microsoft Internet and Security Safety Center

  For more information on how you can these types of phone scams, visit this site.

  I hope this information has helped. Let us know if you have any additional questions.