Preventive action copy of the pdf file

Similar Questions

• contents of the copy of the PDF file generated using Pagemaker 6.5C

  My colleague has generated a set of PDF files generated using Pagemaker 6.5C (Mac version).

  Now I want to copy the contents of PDF files (many Chinese words).

  How can not highlighted all Chinese characters, when I tried to copy them.

  Although I can highlight most of Chinese characters, I got a lot of weird as sighs "#!" "$#" but not original content.

  You say please what can I do to get the Chinese characters copied (100%)?

  Thank you very much!

  You need the exact fonts of your colleague, and even in this case, it may not work if they subset fonts in the pdf file. Your best bet is to get your colleague to copy the text for you in a format that you can use, but even in this case, you will need the fonts, pagemaker is rather limited in the fonts that can be used and required a lot of special fonts in order to work.
  Jay

• Select and copy in the pdf file

  The security settings of the file, I see that the pdf author has enabled the copy, but I can't choose and copy. How can I do?

  A sweep is essentially an image; You cannot select all (or part) text on the subject.

  The only way to get the text from a scanned image must deal with text recognition (OCR), which is available in Acrobat or Adobe PDF Pack service.

• If I copy and paste a comment in a pdf when I create a comment copied xfdf file is not included.  Is it possible to add these comments copied to the xfdf file?

  If I copy and paste a comment in a pdf when I create a comment copied xfdf file is not included.  Is it possible to add these comments copied to the xfdf file?

  Hi Steve Whipple.

  This link (Acrobat Help |) Import and export comments ) seems relevant to your query. Please let me know if it allows you to export xfdf file comments.

  Kind regards

  Rahul Tyagi

• Is there a way to detect if the PDF file is the original of our server, or a local copy.

  Hello

  We are currently generating very large PDF files in our industry that contains industrial revenue and users should always use the latest version (one located on the server - the pdf has always the same path and file name)

  We already had bad experiences when users were using a file that has been saved on the desktop and was obsolete.

  We want to do is only to print the PDF file from the server and disable printing when the file is on the desktop, or in any other place.

  So my question is: are there at - it a way to read the path to the file when printing and disable printing or use addwatermarkfromtext if the path is not the path to the server?

  I hope my question is clear and I will find a solution.

  Thank you.

  A script can be used to detect the location of the file, but you can't stop to print. However, you can display a warning label if it is not located at the desired location. So let's say you set a text field hidden with the warning message, called "PrintWarning". You can then use something like this as a script Will Print the file:

  if (this.path!="....") { // here you need to enter the path of the file on the network drive, which you can get from the console by executing this.path
      app.alert("Error! You should not print this file from your local computer!");
      this.getField("PrintWarning").display = display.noView; // The field will be visible on the print, but not on screen
  } else this.getField("PrintWarning").display = display.hidden;
  

  PS. I'm moving your question to the Acrobat JavaScript forum, where he is best.

• After you enable the "Click-to-play" plug-ins, I can't open the pdf files.

  In the latest version of Firefox, information on how to prevent the plug-ins automatically load was in the notes. I activated this topic: config. (Click-to-play).

  After that, I can not open pdf files! When I click on a link all the that get is a window empty. Reloading page do not help.
  What I can do, is to click on the button next to the awesome bar and set the plug-ins always will automatically load to this page. Then the pdf file is loaded.
  Another book is about to copy the link and paste it in Internet Explorer.

  Is this a bug with "click-to-play '?

  This is a known issue.

  • https://support.Mozilla.org/en-us/forums/contributors/708518

  Bug 736998 - Flash click-to-play broken when opening swf directly
  Bug 747105 - Click to play breaks acrobat reader
  

• Optimize the PDF scanned for ONLY the PDF FILES in a folder?

  Using the Action Wizard to batch optimize scanned documents.  When you select a folder, how can we only to optimize PDF files and jump on the conversion of all other types of files (JPG, TIF, DOC) ?  Currently it is to convert all the files in the folder in PDF format, but we want only those who are already PDF. optimize

  Thank you!

  ATC

  Copy the PDF files into a new folder and run the action on this issue.

• How to reduce the size of the PDF file on scanned on my PMX922 docs

  I deal with a lot of documents, and I find that when I scan the docs on my MX922 the size of the PDF file is MUCH larger that the size of the original PDF file. That's what I see (on a document page 2):

  (Received) original size: 11 k

  Default scan (Quick Menu): 1061 k

  With compression high (Quick Menu): 116 k

  The Panel of the printer (res 150): 209 k

  Windows scanning app (150 res): 1495 k

  Scanning from the Quick Menu with high Compression seems to be the best, but it still somewhat adds to the file size. It's a big problem so I dal with many GREAT docs. Several times the size of the file increase prevents me from being able to send files. Is there anything else I can do? Does anyone have any suggestions?

  Hi 1wwjdbro,

  We can set the PDF to HIGH compression option in the utility of digitization of IJ and also select the image digitized transfer compression to reduce the file size of the PDF file. To do this, please follow these steps:

  1. open the utility of scanning IJ.

  2. in the Scan from Canon IJ utility window that opens, click SETTINGS... at the bottom right of the window. The settings dialog box is displayed.

  3. click on the SCAN of DOCUMENT option in the left pane of the window.

  4 in the right pane window, look for the box to COMPRESS SCANNED IMAGES to be TRANSFERRED in the Scan Options section and check it.

  5. then, in the SAVE the SETTINGS section, find the FORMAT of DATA field and ensure that PDF or PDF (multi-page) is selected, and then click the SETTINGS button to the right of the field.

  6. in the window that opens, find the COMPRESSION PDF section, then select TOP from the drop-down list. Click OK to close the window. You will be taken back to the SETTINGS window.

  7. once all settings have been selected in the SETUP window, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen is displayed.

  8. click the DOCUMENT button. Housing starts scanning. Click CANCEL to cancel the scan if necessary. The scanned images are saved to the location of the selected folder previously specified in the SETTINGS... window.

  I hope this helps!

  If you need more assistance, please call 1-866-261-9362, Monday - Friday 10:00 - 10 pm et (excluding holidays) and a technical support representative Cannon will be happy to help you.  There is no charge for this call.

• System anticipates the PDF files?

  For a few years on computers running Windows XP, I noticed that whenever I get near a file Adobe PDF system seems to anticipate the

  Open the order (click) showing the hourglass and slowdown in other GUI functions as if it is already running a kind of preparation in the

  Open the file.  It is very annoying.  Did this action entering premature memory PDF normal?  Is there a way to fix this?   Any help appreciated.

  Thank you.

  The 'problem' is the Extension Adobe PDF in the browser.

  This extension retrieves the information of preview of the PDF file, so it works as expected (according to Adobe).

  If you keep your up while Task Manager by placing the cursor on a PDF file, you will see the AcroRd32.exe run for a few moments and disappear while the preview for the file information is retrieved (where the hourglass for a while).

  If you find it boring, use ShellExView temporarily disable the Extension Adobe PDF and see that the issue is no longer present and your PDF documents still works fine.  Leave this option off and you can always enable it later if you think that there is a problem.

  Deactivation and activation of the immediate environment ShellExView ls extensions (no reboot is required) so you can disable/enable the extension, watch the activity of the Task Manager with the extension enabled and disabled, hover over your PDFs, etc, etc.

• suggest correct PDF taget IDs to call the pdf file!

  Hello I want to open the pdf file that is stored in my assets folder. I implemnted the with th http://developer.blackberry.com/native/documentation/cascades/device_platform/invocation/adobereader... refernce this link.but when I run the application it gives me no targets were found error.how to solve the error? pls help... Here is my code

  Application of InvokeRequest;
  m_invokeManager = new InvokeManager (this);

  request.setTarget ("com.rim.bb.app.adobeReader");
  request.setAction ("bb.action.OPEN");
  request.setMimeType("application/pdf");
  QString = uri
  'file:///accounts/1000/shared/documents/pdf-sample.pdf ';

  request.setUri (uri);

  answer = m_invokeManager-> invoke (request);
  QObject::connect (response, SIGNAL (finished (()), this, SLOT (myInvokeReplySlot ()));

  Thank you

  Install the latest leak of 10.3.0.11052 to the alpha of dev and you will have Adobde too.

  or just install Adobe Reader only

• When I export a PDF to JPEG, the margins are screwed to the top, but not in the PDF file. Why?

  I did a series of layouts landscape 8.5 x 11 in Illustrator, they all had the same instructions in the PDF file, aligning the different elements of text and vector itself. When I saved and print PDF files, they look good and printed as expected.

  However, when I go to file-> export... and save another version in JPEG format, they are all out either a little cut on the left margin or right margin. It is not consistent that confuses me, also because they look all uniforms in PDF format. Anyone know what I can do in the document or export the setting to prevent this from happening in Illustrator?

  When we realized that what was going on, we just open the PDF files in Acrobat Reader and saved in JPEG format, which takes more time, but is not screw up left or right margins. Any ideas what's happening? Thank you!

  You have to draw everything in alignment with pixels in Illustrator. Otherwise, a line may fall between 2 rows of pixels and you get this effect.

  But let's be honest, I think that JPG is not the best type of file to export from Illustrator. Why you do this?

  If you need to print, use HAVE or PDF/X-4, if you need it for the web or MS Office use PNG, if you need it on MS Office on Windows, use EMF.

  JPG has some kind of lossy compression that makes very visible spotty areas with drawings line Illustrator produces, so I would not recommend to export HAVE them in JPG format at all, unless you have a priority of photography and the work of art is not the object of your file.

• Action scripts when the PDF opens in the browser

  I may be in the wrong forum or can answer this question already

  I think that the answer will be no. but thought I would ask

  I use Adobe Pro and our institution as a whole has a license for Adobe Pro

  I wrote a script of Action that retrieves certain pages of a document package, some of them emails, records some of them and destroy them before that parts of the package that need signed are printed

  Here's my number

  We have Adobe Pro xi

  Windows 7

  THAT IS TO SAY 10

  The formula in question is generated from a browser application. All employees have the ability to go into tools - manage add-ons - and enable or disable Adobe Reader

  Mine is always disabled

  Several members of the staff have it turned on and open the document in the browser

  -so far all document javascripts I have written have worked anyway

  Action script though - I can't call when I go and activate Adobe Reader as the only elements that show to the staff's signature and comments form. The 'Tools' option is not there, and this is where my action script.

  I could force the staff to open in PDF format - but they won't be happy if I force this option

  is far from having the tools - and so my action script work if they open the PDF file in the browser?

  I guess I could try to do all the action script code in a JSButton if this is not possible, but action script allowed me to break the code into the section

  Thank you

  Acrobat/Reader install a limited Player plug-in and allows only some features that allow to interact with the file PDF is displayed in the browser for playback and recording. It does not features.

  If you need this plug-in, save the PDF file on the local system, and then open the saved PDF file.

• Export from InDesign to PDF and the PDF file last updated is greater than one month and not easily print on letter paper is PDF presets?

  Hello

  I export from InDesign to PDF page is larger in the PDF file, and others I exported. This is because of the present PDF? One of the project managers is not able to print on 8.5 "x 11", but the InDesign document presets are the same as before. I wish I could download PDFs to show, but the newly exported PDF is greater than the version I created a month ago. I created a PDF file and the newly updated PDF file is almost un.5 inch wider with the export presets even. Any thoughts?

  

  

  Sadira00123456789 wrote:

  One of the project managers is not able to print on 8.5 "x 11", but the InDesign document presets are the same as before.

  I suspect the project manager has his copy of Reader/Acrobat simply set to print full size, rather than "Worthy" (assuming that the size of InDesign pages is truly 8.5 x 11).

  .. the newly updated PDF file is almost un.5 inch wider with the same export presets.

  This has nothing to do with export presets. How did determine you this difference of half inch?

• Automatically rasterize all vector drawings (less the texts) in the PDF file

  Hello

  I looked at the Adobe Acrobat documentation and also within the frequently asked questions of this forum for this specific information was not found. If I missed something, please tell me

  I have a PDF file containing a lot of vector drawing made in Illustrator. The PDF file generated from Adobe InDesign. If the PDF file is a mixture of text and vector drawings.

  I want to send this PDF document on the web, but for some legal proposed, these vector drawings should all be rasterized. For sure, I can open each. Original document to HAVE, rasterize the content, then reissue the InDesign document (so the exported PDF file's text and all raster images).

  But, as I refer to 100 pages PDF, containing, at a minimum, 150 drawings vector, it takes a lot of time to open each work in Illustrator and manually generating a rasterized copy to use in the final PDF file.

  So the question is: is it possible (in Acrobat or any plug, approx...) to open a PDF document, then automatically rasterize any vector drawings (less the texts) in a specific resolution? For example, rasterize all at 150 pixels per inch.

  With the help of Acrobat DC under Windows OS 8.1.

  Thank you very much

  Gustavo.

  You do not miss anything, there is no Acrobat tool for this.

• insertPage RaiseError: an incorrect structure found in the PDF file

  Hello

  I am trying to create a button script that will create a new document, copy (insert) on the first page of the open document, save it, and then close it.  I think the part where it becomes difficult - and perhaps not feasible - is that the original document (source) using a model; plenty of form fields to be laid off as the new pages.

  In view of the above, ideally, the form user can click on the 'save a new page' button: it creates anj Inserted a copy of the first page of the form, free of content though everything has been registered, and excluding all other pages that may have been created.

  With the code that I use, it is currently creating the copy of the page and inserts it as the zeroeth page (in front of a blank page, I intend to add the code later to remove) and saves it.  However, there are some problems that arise with it.  First is the error code that is displayed in the debugger:

  RaiseError: An incorrect structure found in the PDF file

  New Doc.insertPages:29:AcroForm:Save form: Annot1:MouseUp:Action1

  = > An incorrect structure found in the PDF file

  Despite the error, he always saves the page (copy of the form) as mentioned above.  However, if you try to start working with him, he lets you know that there is no form field in the document (even if they are all there and apparently functional).   When I think of edit fields, it will ask if you want to try to recognize the fields.  If I click 'Yes', he said it was impossible, but then the form opens with all corresponding perfectly to the original domain names.  If I click on 'none' he just open the page with all the fields match again.  So I feel like I'm close to being able to do that!

  I use the following code to produce my results:

  (In the "app" of JavaScript, I have the following functions of confidence :)

  myTrustedMenu = app.trustedFunction (function (name)

  {

  app.beginPriv ();

  app.execMenuItem (name);

  app.endPriv ();

  });

  myTrustedSaveAs = app.trustedFunction (function (doc, namePath)

  {

  app.beginPriv ();

  doc.saveAs (namePath);

  app.endPriv ();

  });

  myTrustedNewDoc = app.trustedFunction (function)

  {

  app.beginPriv ();

  var doc = app.newDoc ();

  app.endPriv ();

  return doc;

  });

  myTrustedInsertPage = app.trustedFunction (function (doc, namePath)

  {

  app.beginPriv ();

  doc.insertPages ({}

  nPage:-1.

  cPath: namePath,.

  Start: 0

  });

  app.endPriv ();

  });

  (On the 'Save a new form' button, the following code is activated :)

  First double document path in a table

  var aPathComps = this.path.split("/"); "

  Get the name of the file to off the end of the array of

  var myFileName = aPathComps.pop ();

  var path = aPathComps.join("/");

  var = myTrustedNewDoc() myDoc.

  myTrustedSaveAs (myDoc, path + "' / test.pdf '");

  myTrustedInsertPage (myDoc, this.path);

  myDoc.resetForm ();

  myDoc.closeDoc (true);

  I apologize for the long post and I appreciate anyone who takes the time to review this question for me.

  Thank you

  Mike

  The reference to "structure" will be on the tags. Use the display of labels and remove all the tags, the problem should disappear.