Preview of Skype audio/video settings

Similar Questions

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Webcam does not work on Skype, but I can get a preview in the video settings

  My webcam is not working for Skype calls, but I can get a preview on the Skype video settings and it also works on the various programs and services that use the webcam. This problem occurred recently when Skype has updated to the new layout

  Hello

  Sorry for wasting time, but the problem was that were far too many people in the Group call and that smaller groups make the video work

• Toshiba 40L7335DG: small delay audio/video using the tuner internal

  Sometimes the video audio delay when you use the tv tuner internal.
  The delay is sometimes small and insignificant, sometimes reach approximately 500 ms.

  When some audio or video settings are set to different values to the default values stay worse.

  Other TV (LG) don't have the problem when using the same signal.

  Hello

  Have Hmm you tried to reset the TV to factory default?
  Do this. I read somewhere else that factory settings could help solve such audio problems.

  I had a similar problem with my TV from another manufacturer using a HiFi amplifier as part of s the TV HDMI port.
  But I could solve it an option in the menu of the amp which decreased the output of audio sync problems.

• Audio video players have an intermittent humming/freeze for 1-2 seconds - Dell Vostro 5470 Win 8.1

  Help - all devices audio / video have intermittent hum and freeze the video on my new Dell Vostro system 5470 Win 8.1. This happens with Windows Media player, various audio players, even in Skype!

  I see messages on the removal of the center of support Dell etc. that is not the response that users should have to live with - Dell?

  I have a XPS 17 (L702X, early 2011) and removed Dell help. This solved this problem.

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Adobe first CC 2015 reset the Audio hardware settings

  Hello

  I have a curious scenario; I think that it is related to all these discussions about audio problems in first CC 2015. I have a client running a new Mac Pro with CC 2015. It worked fine for several months until last week. First began to change the audio settings in Control Panel preferably on its own. The symptoms are that audio stops completely and video playback stops working as well. You see just a still image from the video. This happens on after 10-15 minutes of editing. We have been able to temporarily fix things in going in the Audio hardware preferences and changing output and input built-in by default. Which only solves the problem for 10-15 minutes well. After that, we need to restart the machine in order to restore playback. This happens with any project.

  My client is running first for 2015 CC version 9.0.0. (247) here's a screenshot of its audio hardware settings and OSX sound control panel.

  

  I think that things should be set to audio built-in by default. But what happens is first keeps changing the default entry, the default output and Master Clock to tell the Audio display fields. Sometimes it shows as DisplayPort as well. Notice that this is different from the output that we defined in the acoustic Panel. We have removed our media Cache files and this always seems to happen.

  Any advice on what is happening?

  Hi André,.

  The 9.0.2 patch for Premiere Pro CC 2015 comes out that has a fix for the Multicam. Please update and verify.

  Premiere Pro CC 2015 update (9.0.2) | First work Pro area

  Vinay

• Ripple delete, and audio/video tracks

  Hello

  1. when I change I tend to cherboard audio/video, then I will have a video/audio 1 shot and the other on audio/video 2. Now unfortunately when I remove the ripple, the clips will overlap. What I want to do is align with the last clip of any audio track (see photo). I hope it's just a few settings that I need to change.

  2. once a clip in the timeline panel, say on audio/video 1 and I would like to make the video clip 2, is it possible to drag and have audio and video move to their track of 2? Now, I have to move audio and video separately, even if they are related.

  3. is at - it a shortcut to unlock clips (separating audio and video)?

  

  2. in previous versions (Pro2?), the audio part went automatically to the corresponding track.

  Select the clip and drag the video portion to follow both.

  Do not let go of the clip.

  Now, press SHIFT and hold down the key, always with the selected clip.

  Move the mouse over the audio 2 track. (or whatever the way you want it to be on)

  You can do this with several selected clips and contrast from the first selected audio portion.

• Satellite R630-13R - HDMI output only for the audio/video receiver?

  I have the opportunity to play the DVD on my Satellite R630-13R with the release of his passing through the stereo jack to my amp, but now that I have to buy a new amp, I've been watching AV receivers that have the HDMI inputs and pass through the image.

  I won't have a TV screen connected for a while (until what it comes to upgrade), but can I enjoy the HDMI sound transformed in the audio/video receiver in the meantime?

  Hey,.

  Yes, you can use the HDMI connection to an AV receiver as HDMI transfer its too.

  I found a thread similar to the receiving subject audio/video HDMI. Maybe it of useful for you also if you have any problems with correct configuration:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50845

  I hope I could help you :)

• Camileo H30 - Audio & video don't work synchronously with Win XP

  My computer is running Windows XP.

  I downloaded DivX 7 as an actor of HD movies.

  But when I download the videos to my computer and you try to play with the DivX 7, the sound is out of sync. But the videos shot in SD play fine.

  Any idea why this might be happening and how to fix?

  I also have the ArcSoft software installed as well.

  Hello

  I have read a lot about these symptoms and it seems that your material is not keeping up with the reading.
  The reason is that the sound plays back well, because its easy for the hardware of computers to do this, but if it is the video, the system is overloaded. The part big percentage of executives "fall": This means that they are not displayed. The frames are correctly displayed are usually late and this causes audio/video synchronization issues. If you have a video problem fell/delayed due to the computers hardware limitation.

• Transfer of existing credit from the classic to the new Preview of Skype Skype

  I just converted the classic Skype to Skype overview, but the credit I had on the classic Skype has not been transferred even if I have the same profile and account. Can someone tell me how I can get the credit transferred through?

  Any client you use, desktop, preview, web, PC, mobile or any other form, when you buy Skype credit, you purchase for your account, not the device, so your credit will be the same on the desktop as the preview of Skype program.

  No need to "Convert" you can always use the desktop version if you wish (in fact, I prefer the preview) and although they cannot be open at the same time, you can easily launch the desktop version and sign in and perhaps check your credit again.

  Are you sure that you have not signed for another account by mistake to 100%, are all your messages and contacts appear?

  To check your credits in the preview, click on your image has everything down to the left of the preview and if doubts, check your account

• Satellite L755 - problem Audio/video using the WLAN connection

  Hello

  Recently got a Toshiba L755 and have a problem with the playback audio & video since I got it.
  I've updated the latest drivers for the Conexant HD Audio card and it made no difference.

  Essentially during playback there are a sound intermittent distorted during playback mp3, video playback and online stream.

  I tried different programs and the same thing, however, when I have a LAN cable presents no problem - it's only when I'm connected to the wireless network.
  I have a netgear router which works fine.

  Can someone please tell me what might cause the wireless create this problem and how to fix?

  Thank you very much
  Alex

  Strange you noticed this in battery mode and mode of AC adapter as well?
  Maybe a few Wlan signal interference can cause this

• Windows media player video settings do not respond!

  Hi all!

  Video quality color on w/media player is not clear. I tried to adjust the video settings
  the installation of the program. The cursor always adjusters back to zero after that I tried the adjustment.

  Alternately, I tried to find how do I reinstall the program from the recovery disk, but were not able to identify
  the program in the recovery disc.

  Hello

  It is absolutely wrong forum for this. Check please if you can find something on the Microsoft support page. Toshiba is not responsible for the functionality of Microsoft applications.

  Try to install the latest version of Windows media player. Maybe it helps.

• Audio & video controls on Satellite A50

  Hi all

  Anyone got any ideas how to get the audio/video controls to work on my satellite A50?

  They do not seem to work with any of my media players i.e. wmp10, nero, power dvd...

  Anyone got an idea as to this driver, I need to make them work.

  P.S.: They worked, but after that I formatted the disc they stopped so obviously im missing pilot.

  Also I don't have the recovery disks. Is this downloadable from anywhere?

  Thank you

  Hello

  You must download the tools for the buttons on the Toshiba site. With this tool, you can activate the buttons.

  Just look at this site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Search for your machine, please select your operating system and download the appropriate tools (should be "touching a launch" or "orders")
  I hope I could help

  Welcome them