Preview white screen after accident and redefine the site

Similar Questions

• .exe white screen after you have used the application on a programme of work Builder.

  Hello

  I am new to Labview development and I have a problem.

  I changed an application to fit my needs and when I run it there is no problem (Labview 7 Express) in debugging.

  After using the application builder to build my new soft, I have a white screen at launch.

  I tried before using the application generator and succeed with this same software (when my changes were in progress), and it worked.

  Do anyone have an idea? You need more info?

  Thank you.

  
  

• BlackBerry smartphones white screen after that I entered the wrong ID password too many times

  Hello

  I was trying to sync my blackberry information to my computer laptop when I was asked the ID password, I tried a few options but could remember nothing. When it reaches the last attempt of the screen says that if I entered the wrong pin code it would erase all of my information. I stopped went to the site and changed my password to make sure, so I went back and entered the password. Immediately the screen turned white and began to clear all. I pulled the battery immediately and have been frantically the Internet a way to undo it. Please please please help.

  I have so many things on my phone, I really need. Especially my baby :-(videos

  Can someone help me.

  Hello and welcome to the community!

  Failure of the BBID credentials will never wipe a BB. What actually happened, was that you entered correctly your password user - created lock too many times, and he went with the unit, in accordance with the requirements of the security level agreed upon activation of this function of wiping. There is no way to stop it.

  I'm sorry.

• White screen after the upgrade, thoughts?

  Hello

  I have a mid-2011, 21.5 "iMac. When I upgraded from Yosemite to El Capitan, I got the white screen of death on restart. I saved time machine, reinstalled, and everything was fine. When I did the update niveau.1, the same has happened (white screen, then backup, and then reinstall) and now, last night, after le.2 upgraded the same story happened.

  When I run on the armored white mac disk utility, it shows all the hard drive as being full of the 'other', which is certainly not, but the drive is labeled as OK.

  Before I try reinstall, I want to know: what am I doing wrong? I'm upgrading via the App Store, I don't have a hackintosh, no illegal absurdity, etc.. But this problem is boring and repetitive, so I figure there must be something I do. Any thoughts?

  I got a grey screen for a few minutes, I came back a little later and I was looking at a login screen.

  The whole process has been about half an hour.

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Sencha shows white screen on Simulator and device application

  Hello

  I developed a sencha sample application using Sencha Architect (2.2.0) and able to see the screen on the emulator to ripple. After generation successful application using emulator waving, when I try to install the application on the device and blackberry simulator (9900,9860) is showing the white screen.

  I applied the changes for window given in link below:

  http://www.Sencha.com/Forum/showthread.php?252232-guide-deploying-Sencha-touch-2.1-as-a-BlackBerry-n...

  Always on display white screen.

  Help, please.

  I removed the circumvention of the viewport from app.js and it works fine now.

• White screen after log-in

  I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

  I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

  Hello LA_Hay,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

  Start your computer in safe mode

  Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If the problem persists, try Method 2.

  Method 2:

  Update your graphics card.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• All white screen selected iTunes and

  Why "Apple TV4' iTunes and App Store time show"White screen"when I click on the app and no selection to show the film and apps that I point these app? I checked on apple store, they said that not a problem for my material!

  Try a reset by unplugging the power cable for 30 seconds.

• White screen when I turn on the Satellite M50

  I have intermittently just get a white screen when I turn on the computer. Usually, the problem is solved by turning off the computer and try again - but sometimes I get a white screen again.

  It seems to be linked to the use of external devices - can someone give me clear instructions on which expected/doesn't have to be connected when I start and shut down the computer? Or other suggested solutions?

  Thank you

  Hi Rachel

  Believe me; It's not easy to provide an exact solution and that's why we need to study a little ;)

  Have you checked if the graphics card driver update could solve the white screen issue?
  If not, try to download and install the latest graphics driver

  You second question on the laptop stop problems is known to me. Sometimes it happens on my laptop too. The LTCC is a part of the Norton antivirus application, which is still running in the background of the operating system.
  This strange box "close the program" might appear because this context process couldn t be closed automatically and so the operating system can not stop.

  Especially the new application installation might help you. But why don't you use Norton Antivirus? What makes the laptop very slow. I have used this app for a long time but now I use the freeware program called Antivir. Its free and in my opinion much better than the Norton Antivirus.

• (Redirected) Precision M6500-white screen on startup and black screen on reboot

  Hello my Precision M6500 has recently begun to behave badly and has following symptoms.

  1 display a white screen on market and a black screen on reboot, the OS boots aand, one that can discern by the jingle of windows at the end of the startup procedure.

  2. the unit turns to the insertion of the battery.

  In order to isolate the root cause of these issues, I tried the following without success.

  1. replacement memory

  2. new display motherboard cable assembly

  3 start with on the SSD on the system, and even at the bios level that the symptoms remain.

  Anyone knows similar symptoms with their unit and if what was then the final fix deployed to solve these problems.

  The system is running an ATI graphics card I read a little about the black screens in booting with Nvidia cards, can anyone confirm if all the info out there has any application for ATI cards.

  Thank you

  engindigo

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Black screen after that I entered the password for the connection.

  Original title: missionary59

  I have a computer that is a laptop. When I go to start the boot process that the computer turns on at the entrance of logo and password, when I put the password in the square when going on the applications, but the screen is black and only the cursor appear!

  Hi Genedupree,

  A problem with a layer of security software causes the Desktop Window Manager to wait for an indefinite period or video adapter problems are the most common cause of this problem. I suggest you to see the help link and check if it helps.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See also:

   

  Windows Vista and Windows 7 black screen on computer unlock

  http://support.Microsoft.com/kb/2431700/en-GB

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• When I log into admin profile I get a white screen. I'm guessing the profile to use my computer to log

  cannot connect to profile admin I get a white screen I have to guess the profile allows you to use my computer.

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• CC gives me a white screen. Uninstalled and reinstalled app on any screen available white only. What to do with nxt?

  CC gives me a white screen. Uninstalled and reinstalled app on any screen available white only. What to do with nxt?

  Hi Wolfgang,.

  Please refer to the threads below where this issue has been addressed:

  New application Cloud Creative unusable: it is empty!

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  Re: Empty opening creative cloud app

  Kind regards

  Sheena