Previews - allows you to use or not for the final export

Similar Questions

• You can use NI 9237 for the LVDT readings

  Dear comrades,

  I wonder if I can use NI 9237 and NI 9945 to get the reading of an LVDT. The interest is to measure the movement using Solartron DC Miniature LVDT.

  In our laboratory, we have NI 9237 and NI 9945 and I would get your advisor if it would be good enough to measure the movement of an LVDT.

  Thanks in advance.

  Hi Gtharm,

  For the Solartron DC Minitature LVDT transducer already includes oscillator, demodulator and filter which alow the sensor to accept the input voltage and provide a DC output from the position. Therefore, instead of using the bridge according to the measure such as the NI 9237 or NI9945 modules, you must only input I take the input voltage.

  The LVDT voltage range would determine which modules HAVE you need to take the measure. Of the specification, you need to at most 100 Hz to get the signal from the probe safely.

  I hope that this help mate.

• Flash vs animate using Animate/encode for the class

  Hello!

  I take Adobe animate as a class for graduate studies. I use the latest version of Animate, however, the class uses the book of Flash CC 2013 for the lessons. In Lesson 7 I have Media Encoder allows you to convert video files for the project Animate lesson. The book ask the converted videos is no longer available due to updates. I am just learning all this so I don't know what is the equivalent of what I need. The original file format is H.264 preset is Source of Match - broadband and the lesson asks me to convert it to the Format F4V and Preset Web - 320 x 240, 4 x 3, project Framerate, 500 Kbps. help, please!

  Support for FLV and it seems F4V, has been abandoned for a long time. You may need to check with your teacher if you can say MP4/H.264 to these same settings. Or, if you look at the menu CC, applications tab, you can set up previous versions of the applications, then use the version from 2013. Don't know if this is old enough, you may need to install the version of CS6.

• Can Oracle 10g - I use a variable for the access of the user identifywhat tablesto?

  I have the following code in a trigger (PL/Sql block) of a form:
  
  Select fieldname in user1.sometable myvar;
  
  is it possible to use a variable instead of coding hard "user1"? And on the same subject, this variable would also be declared in the world?
  
  Thanks in advance,
  Darren

  Hello!

  User1 is the owner of the table sometable.

  If only the User1 runs your form, there is no need to put the tableowner in front of the tablename parameter.

  If other users run your form, you must create a public or private (for each user) synonym of this table.
  After that, you don't need to use owner.tablename in your sql statement.

  But:
  You cannot use a variable for the user name without using dynamic sql
  as you do if you create a recordgroup.

  Concerning

• Good night, I'm just starting bussines Design, I'm not rich enough to buy a license of photoshop, but I am loved to use photoshop, I use photoshop cs2 for the free version? Thank you very much for your attention.

  Good night, I'm just starting bussines Design, I'm not rich enough to buy a license of photoshop, but I am loved to use photoshop, I use photoshop cs2 for the free version? Thank you very much for your attention.

  There is no free version of CS2.  There is only a special version of CS2 available for those who have bought and need to reinstall it.

• How can I use a video for the preview looks like instead of the fixed image?

  How can I use a video for the preview looks like instead of the fixed image? I use android lollipop.

  Hi Ali,

  Video preview for looks is not currently supported on Android. Your feature request was noted by the team.

  In the meantime, there is a video on the device you want to use as an overview, I would recommend taking a perforated CAP and still image as loading preview.

  Best,

  Bronwyn

• You can use a zip for time machine drive?

  I know he said 'external hard drive', but do not know if this means that you can use a zip for time machine drive? (including so you can back up your entire OS, but also files)

  Probably yes, but just wonder how to connect ZIP drive to your iMac.

• TomTom map is wrong in vietnam, pls use google map for the ios update, thank you

  Map of Tomtom is very bad in vietnam, please use Google map for the ios update, thank you

  We are fellow users on these forums, not support nor Apple iTunes.

  TomTom are responsible for their own data to the card, if you have problems with their app and/or cards that you have tried to contact them?

• I have a logo on a white background.  I need the bottom either transparent.  Not for the life of me I remember how to do this.  Could someone help me with this, please?  Thank you

  I have a logo on a white background.  I need the bottom either transparent.  Not for the life of me I remember how to do this.  Could someone help me with this, please?

  Elimination of the background is transparent can be done with precision using the mixture control if the Style layer.

  1. open the file and if the layer is locked, trash the lock.

  2 Cmd + click on the new icon layer in the layers panel to apply a layer of vacuum below the object.

  3. return to the upper layer and double-click it in the layers panel to bring up the layer Style.

  4 in section mixture if at the bottom of layer Style, move the high gray-scale slider to the right page to the left until it disappears from the background of the illustration. For extra precision, to the point where the White is about to disappear, you can click Option on the half left of the cursor to divide and move it gently to the left when you look white in the picture disappear.

  5. layer > merge down and then file > save

• You must use view client for windows to access view server connection"

  When I go to my security on the outside, I get a message in 5.1, but 5.0 would simply run the installation of the client.  Is this new 5.1?  "You must use view client for windows to access the server view connection."

  Well Yes new feature. Is VMware view Client unbundling

  Take a look at

  http://www.VMware.com/files/PDF/view/VMware-view-evaluators-Guide.PDF

  from pg 87

  On page 88, he says

  Portal of the view on the login server see the landing Page

  The URL root view connection server is hosting a view portal or download customer portal, as the default value, the destination page. The page contains instructions to launch an existing customer of the view and a link to a download page to the VMware.com website that contains a client compatible with the detected operating system version.

  The portal of the view is more directly initiates a Client installation view, but instead allows the user to manually call the installation process.

• I own CS 5Premium. Read the FAQ, it seems, I am eligible to proceed to 6 CS but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month, it's too much for me - do not use this product for the job. The offer of $29 se

  I own CS 5 Design Premium. Read the FAQ, it seems, I am eligible to proceed to 6 CS but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month, it's too much for me - do not use this product for the job. The offer of $29 seems reasonable but $49 is too much. I don't need most of the programs included in the CC, but subscribing to only three of them will cost much more. Really don't know what to do here :-(

  Buy CS6:
  ----------------------

  http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  I believe that the offer of $29 is only for the first year, so you would end up paying $ 49 thereafter.

• Message from CDC Web site... In order to offer a web experience more safe, we have updated the CDC.gov site. The browser you are using is not

  When you try to view the CDC Web site, I get the following message.

  «Please update your browser in order for you to provide a safer web experience, we have updated the CDC.gov site.» The browser you are using is not possible because it does not meet necessary safety standards. Please update your browser in order to view the CDC.gov site.

  Thank you for your patience. »

  2 days ago, I could see the site Web of CDC...

  I can view the site without any problems, so I don't think it's to oppose the version of Firefox. This forum is picking up your User Agent string and that seems to be correct - something which causes problems on some sites when it is incorrect.

  Please try the alternative of cache for this site using the shortcut key Ctrl + F5, while, on this site and also erase cookies from this site.

  • _Delete-cookies-for-a-single-site delete cookies to remove the information from Web sites is stored on your computer

  It seems strange that they warn on the display of the site with an outdated browser. They offer a version of the site insecurity themselves. It's not like you're interacting with the site and pay money or connect.

  • Not sure http://www.cdc.gov/
  • Secure https://www.cdc.gov/

• Use two assistants for the acquisition of data at the same time

  Hello

  I want to read multiple data channels of analog inputs on my DAQ hardware. However, when I try to create two separate data acquisition assistants for each entry, it gives an error saying "is reserved for the specified resource. The operation could not be performed as indicated "." Can't use two assistants for the acquisition of data at the same time?

  I have to add different channels in the same assistant DAQ? I tried, but I couldn't separate the data in different graphs.

  How does this work?

  Kind regards

  Allard

  You can't have multiple tasks of the same type (in this case inputs analog) on the same device.  Just so having 1 DAQ Assistant read all your channels and separate your channels for individual transformation.

• I reinstalled Windows 7, but the product key is not accepted. Message says that the product key is upgraded only, not for the new installation. What should I do now?

  I have re installed windows7 and product activation key is not accepted. Message says key is valid only for the upgrade. What should I do now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Oracle of the MAF error ' cannot read the DataControl uses on loadDataControl for the id:

  Need help!

  I created a simple SOAP web service for a remote database that works very well in 12 c WebLogic Server and also in the Jdeveloper HTTP Analyzer. When I use the same web service in the attached code, I get the following error (I've included output System.out.println in Ref. to the flow of the code) I use Jdeveloper 12 c MAF 2.0.0.0.41 on Mac OSx 10.9.

  Chk #0

  Processing line # 1

  Chk #1

  Chk #2

  [SEVERE - oracle.adfmf.framework - AmxBindingContext - loadDataControlById] Cannot read the DataControl uses on loadDataControl for the id: WLFNewActWS. [SEVERE - oracle.adfmf.framework - SynchronizationDC - syncDataFromOfflineToOnline] [Ljava.lang.StackTraceElement;@467c53d3

  @

  


  Sorry about that, I think I'm wrong you.

  OK, I created an example to test what goes wrong.

  1. server side, create a project named Employee_ws

  a. Department_ws.java

  public interface {Department_ws}

  public boolean addDepartment (a Department);

  }

  b. Department.java

  public class {Department

  public Department() {}

  Super();

  }

  int departmentId.

  String departmentName;

  locationId int;

  managerId int;

  {} public void setDepartmentId (int departmentId)

  this.departmentId = departmentId;

  }

  public int getDepartmentId() {}

  return departmentId.

  }

  {} public void setDepartmentName (String departmentName)

  this.departmentName = departmentName;

  }

  public String getDepartmentName() {}

  return departmentName;

  }

  {} public void setLocationId (int locationId)

  this.locationId = locationId;

  }

  public int getLocationId() {}

  return locationId.

  }

  {} public void setManagerId (managerId int)

  this.managerId = managerId;

  }

  public int getManagerId() {}

  return managerId;

  }

  }

  c. Department_impl.java

  @WebService

  / public class Department_impl implements Department_ws {}

  public Department_impl() {}

  Super();

  }

  @Override

  @WebMethod

  {} public boolean addDepartment (@WebParam (name = "arg0") a Department)

  If (Department! = null) {}

  int departmentId = department.getDepartmentId ();

  String departmentName = department.getDepartmentName ();

  int locationId = department.getLocationId ();

  managerId int = department.getManagerId ();

  Connection Conn;

  try {}

  Conn = ConnectionFactory.getConnection ();

  conn.setAutoCommit (true);

  Statement šment = conn.createStatement ();

  String inset_sql =

  "INSERT INTO dept (department_name, location_id, department_id, manager_id) VALUES ('+ '.

  departmentId + "," "" + departmentName + "'," + locationId + "," + managerId + ")";

  šment. Execute (inset_sql);

  Returns true;

  } catch (Exception e) {}

  System.out.println (e);

  }

  }

  Returns false;

  }

  }

  d. ConnectionFactory.java

  import java.sql.Connection;

  to import java.sql.DriverManager;

  import java.sql.SQLException;

  Connect to the database

  public class {ConnectionFactory

  public ConnectionFactory() {}

  Super();

  }

  protected static connection conn = null;

  public static connection getConnection() bird Exception {}

  If (conn == null) {}

  try {}

  String driver = "oracle.jdbc.driver.OracleDriver";

  String url = "jdbc:oracle:thin:@localhost:1521:orcl";

  User String = "employee";

  String password = "employee";

  Class.forName (driver);

  Conn = DriverManager.getConnection (url, user, password);

  } catch (SQLException e) {}

  System.Err.println (e.getMessage ());

  }

  }

  return conn;

  }

  public static {} Sub closeConnection()

  try {}

  If (conn! = null) {}

  Conn.Close ();

  Conn = null;

  }

  } catch (Exception ex) {}

  throw new RuntimeException (ex);

  }

  }

  }

  You can run Department_impl.java to start the Web service. i.e. http://127.0.0.1:7001 / Employee_ws-Client-context-root/Department_implPort? WSDL

  Server side sql:

  CREATE USER employee IDENTIFIED BY employee DEFAULT TABLESPACE users

  Temp TEMPORARY TABLESPACE

  Users WE QUOTA UNLIMITED;

  GRANT create employee to logon.

  GRANT alter used to logon.

  GRANT create any employee at table;

  GRANT create trigger employee TO;

  GRANT create any employee to view;

  GRANT create sequence employee TO;

  GRANT create synonym employee TO;

  GRANT create type employee TO;

  GRANT create employee to procedure;

  CREATE TABLE (DEPT

  DEPARTMENT_ID NUMBER (7, 0) NOT NULL,

  DEPARTMENT_NAME VARCHAR2 (50).

  NUMBER OF LOCATION_ID (7, 0),

  MANAGER_ID NUMBER (7.0)

  );

  2 create a mobile application of CRG named Dept

  

  a. Department.java (even for the server)

  b. SynchronizationDC.java

  import java.util.ArrayList;

  import java.util.List;

  Import oracle.adfmf.framework.api.AdfmfJavaUtilities;

  Import oracle.adfmf.framework.exception.AdfInvocationException;

  public class SynchronizationDC {}

  public SynchronizationDC() {}

  Super();

  }

  public void syncDataFromOfflineToOnline() {}

  It's just for testing, so I build Department manually instead of mobile db data, please replace in your business logic

  A Department = new Department();

  department.setDepartmentId (1);

  department.setDepartmentName("1");

  department.setLocationId (1);

  department.setManagerId (1);

  NamesList list = new ArrayList (1);

  List ParamsList = new ArrayList (1);

  List TypesList = new ArrayList (1);

  namesList.add ("arg0");

  paramsList.add (department);

  typesList.add (Department.class);

  try {}

  AdfmfJavaUtilities.invokeDataControlMethod ("Dept_WS", null, "addDepartment", namesList, paramsList,

  typesList);

  } catch (AdfInvocationException e) {}

  System.out.println (e);

  }

  }

  }

  c. new an AMX pag called Dept.amx

  "http://www.w3.org/2001/XMLSchema-instance" xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  Text = "syncDataFromOfflineToOnline."

  Disabled = "#{!}" Bindings.syncDataFromOfflineToOnline.Enabled}"id ="cb3"/ >

  d. deploy on Android Simulator

  

  Click the button and a new record have been db insert through the webservice, search the remote db recording

  

  If above does not solve your problem, please let me know, thanks.

  Byron