Price loop request?

Similar Questions

• dynamic reading of I/O

  Hello

  With the host WSN palette, it's pretty simple to discover all the nodes added to Max. The node reference can then be fed to a loop for to manage each reference individually. In each loop, I can then send and receive messages, check node information and so on, but there is no function to get values of I/O. I have to take each i/o of each node in the project for my block diagram Explorer and therefore cannot have this for loop set so the same code can be run for each node. I hope that what I'm trying to get at is fairly well explained.

  The only other alternative is to have him send a message inside the loop requesting data and the node responding with values of I/O via the message. Would it be possible in the future create a VI "returns all nodes IO values" which refers to a cluster with each value of I/O inside? Is there a solution that I missed?

  Thank you

  Jevon

  Hello Philippe,

  It is a big question.  You are right that there is no way to read the values of e/s using the API of WSN.  Instead of this, the data should be accessible using shared variables.  Fortunately, there's a shared variable API in LabVIEW 2010, which can be used to access these data values programmatically instead of by pulling on the e/s of the project.

  To make things easier, an API has been created and assigned to the community who will automatically open all these references to you programmatically and return the data of interest.  The API is also open source, so you can learn how it works and adapt it to your needs if necessary.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6385

• PC Settings opens start menu

  I tried to get the media on my computer center and eventually install a new windows, I have since converted to the original version has my computer and now I can't open laptop settings. Whenever I click on the configuration of pc link, it opens my Start menu. It is an important part of the computer as most of the settings are obviously in this file please I need help on how to fix this broken link. I can't pay the stupid price Microsoft request for support. I bought a computer with windows, I should automatically get support. I look in the Microsoft forums for a fix and that I was looking at does not work. ---> http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/my-change-pc-settings-opens-the-start-menu-rather/b7871e48-bf2d-4c81-9a2a-4cbe98c4c9c6

  Hello

  If you purchased your computer with Windows pre-installed, all support is the manufacturer of the computer, not Microsoft.

  But as you know, you are welcome to ask them here for free.

  See if this helps you:

  "How Fix and PC Restore settings and"PC settings"in Windows 8.1"

  http://www.eightforums.com/tutorials/42001-PC-settings-fix-restore-Windows-8-1-a.html

  Information

  This tutorial will show you how to restore the PC settings on applications screen and set the 'Change PC settings' link in the charm of settings (+ I) in Windows 8.1 and Windows RT 8.1.

  You must be logged in as an administrator to be able to do the steps in this tutorial.

  _____________________________________________

  If this isn't the case, follow these steps.

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://Support2.Microsoft.com/kb/929833?WA=wsignin1.0#manually repair

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,

  Repair-WindowsImage-online - CheckHealth

  Repair-WindowsImage-online - ScanHealth

  Repair-WindowsImage-online - RestoreHealth

  Restart the PC afterwards, and then retry the command sfc/scannow .

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  See you soon.

• Edge counting and Source of Timing for timed loop on the request for Acquisition of data - not acquiring data on specified rising edge

  Operating system: Windows XP

  Hardware: PCI 6259

  Terminals used: PFI0 and PFI2

  Counters used: Ctr0 and Ctr1

  IM developing an application for the acquisition of data where timed loop synchronization source comes from my PFI2 (using the string A of an encoder).  IM basically trying to acquire data based on the number of ticks from my encoder.  For the synchronization source, I use counter 1 to capture the rising edge and have the loop time-acquisition of data.  At the same time, Im using the counter 0 to count the number of rising edges so I know exactly in what tick data was acquired.  PFI0 and PFI2 are connect to channel A of the encoder.

  Questions:

  Timed loop acquires data at each tick, because when I discover the data (text) file is missing count of my encoder value.  Is it because there is a limitation on the Windows operating system?  I used a noculars to measure the frequency at the maximum rotation of the channel encoder and 6,757 kHz.  All solutions?

  Also, is there anyway I can route the source channel internally an encoder to generate synchronization source instead of using another counter?  I have attached my VI.

  Hello

  All the samples that you acquire will be read by LabVIEW in a sequential manner. Figure 4-21 on the M-series on page 80 (4-34) shows that you will acquire all the samples you request all channels that you enjoy in sequentially.

• Extraction of the data at the request of the race while loop

  Hi all

  Can anyone help please with the attached VI. Basically, I want to add another button and every time that you press this button, I want the data inside the loop to write once to the worksheet and not at any time before. I want continuely run the loop.

  Please, try to help with a sample VI. I'm fairly new and have difficulty finding the right building blocks .

  Best regards

  Maiz

  Use a button inside the loop.  Put the code to save the data within a structure of matter inside the loop.

  

• Request price diretto FAN by server PowerEdge R210 II

  Buongiorno,

  Abbiamo indivuato UN guasto due ventole del Server PowerEdge R210 II (service tag: 7K556X1) da noi injected.

  Richiediamo one ' offer by the price di n.2 ventole by suddetto server there.

  5s a gentile riscontro vostro.

  Saluti

  Buongiorno, the sto contattando by mail.

• vSphere essential price request.

  Hello.

  I have a question for vSphere 5 kit bulk price.

  VMware vSphere Essentials Kit for 3 guests (Max 2 processors per host) + 1 year membership

  What is say this subscription for 1 year?

  I renew license every year?

  Yes, but when you buy the kit of essentials, you will automatically have a year of active support. Then after a year if you do not renew the contract of assistance you can always have your license, but not access to the support. If you cannot upgrade your host or contact support in case of problems.

  Kind regards

  Julien

• I had requested to download for free, but do not want to buy program because of the price.  How can I cancel

  I asked for the free trial version, but do not want to buy this product because of the price.  How can I cancel and avoid being charged

  A trial is a trial. Unless you actually bought anything, there is nothing to cancel. If you put the "Buy now" button, contact the support sales to cancel the order.

  Mylenium

• Statement of exception for a request loop

  Hi This is my query so far:
  

  declare    
      cursor curs is
       select name_id_no, incident_date
       from MICHAELC.Food_Nov_01_final t
       --where rownum < 6
       for update of cat_latest;
      
      w_cat_latest        number(4,0);
      w_cat_latest_date   date;
      w_cat_max           number(4,0);
      w_cat_max_date      date;
      w_cat_min           number(4,0);
      w_cat_min_date      date;
  begin
      for i in curs loop
          -- get latest cat date
          select max(cat_score_date) into w_cat_latest_date
          from rbn_cat
          where customer_no = i.name_id_no
          and   cat_score_date <= i.incident_date;
          
          
          -- get latest cat score
          select cat_score into w_cat_latest
          from rbn_cat
          where customer_no = i.name_id_no
          and cat_score_date = w_cat_latest_date
          and rownum = 1;
          
          --get maximum cat score
          select max(cat_score) into w_cat_max
          from rbn_cat
          where customer_no = i.name_id_no
          and   months_between(i.incident_date,cat_score_date) between 0 and 12;
          
          --get maximum cat date 
          select cat_score_date into w_cat_max_date
          from rbn_cat
          where customer_no = i.name_id_no
          and   cat_score = w_cat_max
          and   months_between(i.incident_date,cat_score_date) between 0 and 12
          and   rownum = 1;
          
          --get minimum cat score
          select min(cat_score) into w_cat_min
          from rbn_cat
          where customer_no = i.name_id_no
          and   months_between(i.incident_date,cat_score_date) between 0 and 12;
          
          --get minimum cat date 
          select cat_score_date into w_cat_min_date
          from rbn_cat
          where customer_no = i.name_id_no
          and   cat_score = w_cat_min
          and   months_between(i.incident_date,cat_score_date) between 0 and 12
          and   rownum = 1;
          
          update MICHAELC.Food_Nov_01_final
              set cat_latest = w_cat_latest
                 , cat_latest_date = w_cat_latest_date
                 , cat_max  = w_cat_max
                 , cat_max_date = w_cat_max_date
                 , cat_min    = w_cat_min
                 , cat_min_date = w_cat_min_date
          where current of curs;
      end loop;
  end;
  /
   

  I have the following error:
  Error report:
  ORA-01403: no data found
  ORA-06512: at line 37 level
  01403 00000 - "no data found".
  * Cause:
  * Action:
  
  I want to use an exception statement, something along the lines of
  

   exception when no_data_found then
              w_cat_latest_date     := NULL;
              w_cat_latest          := NULL;
              w_cat_max             := NULL;
              w_cat_max_date        := NULL;
              w_cat_min             := NULL;
              w_cat_min_date        := NULL;

  I'm not really sure how to use the exception properly and if it is the best way to handle this error. Thanks for your time and your help.
  
  Banner:
  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  "CORE 11.2.0.2.0 Production."
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production

  I agree with Blushadow that there might be a better way to achieve depending on exactly what you are trying to reach, but - if you like this is the way it should be done then;

  immediately after opening your loop to introduce a BEGIN block and immediately before end of loop will present END; -your EXCEPTION intakes will then immediately before, and you can update as before with all the fields being set to null or whatever.

  Although better for me would be to nest in each of your defined this way would always reach you your update statement and if only 1 on your selection of X into statements fail then all other fields would select values in education in an anonynmous with an exception block to catch the error, and you can catch the exception with your exception block or a common NVL...

  Hope this helps, if if the points are appreciated.

  Kind regards

  Robert.

• No response from Adobe re: request price and license

  Adobe contacted via the link provided here 10 days - no response.

  We have a project that we must move forward quickly and need some answers on the pricing of the DPS.

  If one wants to deal with a third party in New Zealand (or probably Australia) let know us who are talking to.

  I sent your message to some people internally. If you have not heard anything within the next 24 hours please send me a private message.

  Thank you

  Neil

• Exit with delimiters for HTML request. Remove the end of loop

  I < cfoutput query = "rsgenre" > #rsgenre.genre # / < / cfoutput >

  gives me:

  crime / mystery / comedy /.

  How can I make the character at the end to get:

  crime / mystery / comedy

  A single method.

   #rsgenre.genre# / 
  

• Performance of the queries in order to get the most recent price

  Happy new year everyone.

  I have a table of price in my system that has several awards for each product with the date, the price is entered into force.

  I have queries throughout the system to retrieve the most recent actual price for the date of the transaction.

  I can find to implement the easiest way is to have a user-defined function to collect the prize.

  My problem is that many of my questions have access to large amounts of data (for example, transactions) and my table of prices is also big enough - both have millions of records. Using a Pl/SQL function defined by the user in my query, I get a lot of switching context between SQL and PL/SQL and my questions are not well

  Here is an example of code, which simplifies my scenario:

  drop table xo_stock_trans;
  create table xo_stock_trans (item varchar2(25), trans_date date, quantity number(20,4));
  insert into xo_stock_trans values('A',TO_DATE('25-DEC-2014','DD-MON-YYYY'), 4);
  insert into xo_stock_trans values('A',TO_DATE('27-DEC-2014','DD-MON-YYYY'), -2);
  insert into xo_stock_trans values('A',TO_DATE('28-DEC-2014','DD-MON-YYYY'), 5);
  insert into xo_stock_trans values('B',TO_DATE('23-DEC-2014','DD-MON-YYYY'), 20);
  insert into xo_stock_trans values('B',TO_DATE('26-DEC-2014','DD-MON-YYYY'), -6);
  insert into xo_stock_trans values('B',TO_DATE('29-DEC-2014','DD-MON-YYYY'), 15);
  /
  -- Generate lots more data
  BEGIN
      -- Generate more trans dates
      for r in 1..1000
      LOOP
          insert into xo_stock_trans
          select item, trans_date - r - 7 as  trans_date, ROUND(dbms_random.value(1,50),2) as quantity
          from xo_stock_trans
          where trans_date between TO_DATE('23-DEC-2014','DD-MON-YYYY') AND TO_DATE('29-DEC-2014','DD-MON-YYYY')
            and item in ('A','B');
      END LOOP;
      COMMIT;
      -- generate more items
      for lt in 1..12 
      LOOP
          -- generate C,D, E, items
          INSERT into xo_stock_trans
          SELECT chr(ascii(item)+(lt*2)) as item, trans_date, quantity
          from xo_stock_trans
          where item in ('A','B');
          -- generate A1, A2, B1, B2, etc
          for nm in 1..10
          LOOP
              INSERT INTO xo_stock_trans
              select item || to_char(nm), trans_date, quantity
              from xo_stock_trans
              where length(item) = 1;
          END LOOP;
          COMMIT;
      END LOOP;
      COMMIT;
  END;
  /
  create index xo_stock_trans_ix1 on xo_stock_trans (item);
  create index xo_stock_trans_ix2 on xo_stock_trans (trans_date);
  exec dbms_stats.gather_table_stats(ownname =>user, tabname => 'XO_STOCK_TRANS' , estimate_percent => 100, degree => dbms_stats.auto_degree, cascade=>true);
  /
  
  
  drop table xo_prices;
  create table xo_prices (item varchar2(25), price_date date, gross_price number(20,4), net_price number(20,4), special_price number(20,4) );
  insert into xo_prices values ('A', to_date('01-DEC-2014','DD-MON-YYYY'), 10, 8, 6);
  insert into xo_prices values ('A', to_date('25-DEC-2014','DD-MON-YYYY'), 9, 8, 6);
  insert into xo_prices values ('A', to_date('26-DEC-2014','DD-MON-YYYY'), 7, 6, 4);
  insert into xo_prices values ('B', to_date('01-DEC-2014','DD-MON-YYYY'), 5.50, 4.50, 3);
  insert into xo_prices values ('B', to_date('25-DEC-2014','DD-MON-YYYY'), 5.00, 4.00, 3);
  insert into xo_prices values ('B', to_date('26-DEC-2014','DD-MON-YYYY'), 3.50, 2.50, 2);
  /
  -- Generate lots more data
  BEGIN
      -- Generate more price dates
      for r in 1..1000
      LOOP
          insert into xo_prices
          select item, price_date - r - 7 as  price_date,gross_price, net_price, special_price
          from xo_prices
          where price_date between TO_DATE('23-DEC-2014','DD-MON-YYYY') AND TO_DATE('29-DEC-2014','DD-MON-YYYY')
            and item in ('A','B');
      END LOOP;
      COMMIT;
      -- generate more items
      for lt in 1..12 
      LOOP
          -- generate C,D, E, items
          INSERT into xo_prices
          SELECT chr(ascii(item)+(lt*2)) as item, price_date, gross_price + (lt*2), net_price + (lt*2), special_price + (lt*2)
          from xo_prices
          where item in ('A','B');
          -- generate A1, A2, B1, B2, etc
          for nm in 1..10
          LOOP
              INSERT INTO xo_prices
              select item || to_char(nm), price_date, gross_price, net_price, special_price
              from xo_prices
              where length(item) = 1;
          END LOOP;
          COMMIT;
      END LOOP;
  END;
  /
  
  create index xo_prices_ix1 on xo_prices (item, price_date);
  exec dbms_stats.gather_table_stats(ownname =>user, tabname => 'XO_PRICES' , estimate_percent => 100, degree => dbms_stats.auto_degree, cascade=>true);
  /
  
  create or replace function xo_get_price(I_Item in VARCHAR2, I_Date in DATE, i_Price_type IN VARCHAR2) RETURN NUMBER
  IS
      -- Function to get most recent effective price prior to the date
      CURSOR c_get_prices(P_Item VARCHAR2, P_Date VARCHAR2)
      IS
      SELECT gross_price, net_price, special_price
      FROM XO_PRICES
      WHERE item = P_Item
       AND price_date <= P_Date
      ORDER BY price_date desc; -- most recent price
      
      l_gross_price NUMBER(20,4);
      l_net_price NUMBER(20,4);
      l_special_price NUMBER(20,4);
  BEGIN
      OPEN c_get_prices(I_Item, I_Date);
      FETCH c_get_prices INTO l_gross_price, l_net_price, l_special_price;
      CLOSe c_get_prices;
      
      IF I_Price_Type='GROSS' then return l_gross_price;
      ELSIF I_Price_Type= 'NET' then return l_net_price;
      ELSIF I_Price_Type= 'SPECIAL' then return l_special_price;
      END IF;
  END xo_get_price;
  /
  
  -- Here is a typical query I am trying to perform
  select tr.item, tr.trans_date, tr.quantity
      , xo_get_price(tr.item, tr.trans_date, 'GROSS') as gross_price
      , xo_get_price(tr.item, tr.trans_date, 'NET') as net_price
      , xo_get_price(tr.item, tr.trans_date, 'SPECIAL') as special_price
  from xo_stock_trans tr
  where tr.trans_date between '01-AUG-2014' and '31-AUG-2014';
  

  I would like to refactor my request so that I do not use the user Pl/SQL functions, but so far I can't get something that works better than the SQL above. For example, the following query is MUCH longer:

  select tr.item, tr.trans_date, tr.quantity
      , pr.gross_price
      , pr.net_price
      , pr.special_price
  from xo_stock_trans tr
  join xo_prices pr on pr.item = tr.item
                  and pr.price_date = (select max(pr2.price_date)
                                       from xo_prices pr2
                                       where pr2.item = pr.item
                                         and pr2.price_date <= tr.trans_date
                                       )
  where tr.trans_date between '01-AUG-2014' and '31-AUG-2014';
  

  I'm interested to know if anyone has addressed a similar scenario and have managed to write more efficient code.

  I looked at the determinism/manual caching of the function, but the article/date combinations are quite unique and therefore he does not benefit from him.

  Any suggestion under review - parallelism, analytical, pipeline functions, etc.

  Alan

  Hi, Alan.

  Alan Lawlor wrote:

  ...

  My problem is that many of my questions have access to large amounts of data (for example, transactions) and my table of prices is also big enough - both have millions of records. Using a Pl/SQL function defined by the user in my query, I get a lot of switching context between SQL and PL/SQL and my questions are not well...

  You got that right!  User-defined functions can be very practical, but this practice comes with a price.

  What version of Oracle are you using?  The Oracle 12, there is a new feature of 'temporal validity' which may help you.

  In any version, it will be much faster if you add a new column to the xo_prices table.  You can call this end_date, although it would in fact be the date when some other prices took effect.  You might put DATE' 9999-12-31 in the column end_date for current prices.  You can calculate end_date using the analytical function of LEAD.  Be sure to re-calcluate end_date when you insert new rows into xo_prices, or when you update the dates on existing lines.

  Once you have PRICE_DATE and end_date in the XO_PRICES table, you can join this table to get the real price from d by including

  AND d > = xo_prices.price_date

  AND d< >

  in the join condition.

  In some situations, especially when you don't have much different (item, dates) combinations, scalar-sub-queries could be faster than joins.

  Whatever it is, it participates without PL/SQL, so there is no context switching.

• Loop PHP through 2 tables of MySQL?

  Manu chaps,

  I have a bit of PHP code, that loops through a table MySQL (jobs) and displays all the records that were not complete. The code and the MySQL Query work fine.

  I want to know is whether the query can be modified to perform a loop on 2 tables.

  Here's my current query:

  
  @mysql_select_db ($database_conndb2, $conndb2);
  $query_rsJobs ="
  SELECT
  tbl_projects.projID,
  tbl_projects.projtitle,
  tbl_jobs. JobID,
  tbl_jobs. FK_projid,
  tbl_jobs. JobName,
  tbl_jobs. FK_langid,
  tbl_languaget.langtname,
  tbl_jobs.jobpages,
  tbl_jobs.jobshipped
  Of
  tbl_projects
  JOIN IN-HOUSE
  tbl_jobs
  ON tbl_projects.projid = tbl_jobs. FK_projid
  JOIN IN-HOUSE
  tbl_languaget
  ON tbl_languaget.langtid = tbl_jobs. FK_langid
  WHERE
  tbl_jobs.jobshipped =' no
  ORDER BY
  FK_projid ASC";
  $rsJobs = mysql_query ($query_rsJobs, $conndb2) or die (mysql_error ());
  $row_rsJobs = mysql_fetch_assoc ($rsJobs);
  $totalRows_rsJobs = mysql_num_rows ($rsJobs);

  Here is my table that displays the results:

  
  < table >
  < b >
  Title of the Document < td > < table >
  Language < td > < table >
  < Table > < td > pages
  Edit < td > < table >
  Delete < td > < table >
  < /tr >

  <? PHP
  $previousProject = ";
  If ($totalRows_rsJobs > 0) {}
  Show if recordset not empty
  While ($row_rsJobs = {mysql_fetch_assoc ($rsJobs))}
  If ($previousProject! = $row_rsJobs ['prices']) {}
  for each project, see the project ID
  ? >

  < b >
  < td > <? PHP echo $row_rsJobs ["PROJID']? > < table >
  < /tr >

  <? PHP $previousProject = $row_rsJobs ["PROJID"]; } ? >

  < b >
  < td > < a href = "jobsheet_details.php? id = <?" PHP echo $row_rsJobs ["IDTravail"];? > & amp; proj = <? PHP echo $row_rsJobs ["PROJID'];? > "> <?" PHP echo $row_rsJobs ['jobname'];? > < /a > < table >
  < td > <? PHP echo $row_rsJobs ["langtname"];? > < table >
  < td > <? PHP echo $row_rsJobs ["jobpages"];? > < table >
  < td > < a href = "jobsheet_edit.php? id = <?" PHP echo $row_rsJobs ["FK_projid"];? > & amp; job = <? PHP echo $row_rsJobs ["IDTravail"];? > "> edit < /a > < table >"
  < td > < a href = "jobsheet_remove.php? id = <?" PHP echo $row_rsJobs ["FK_projid"];? > & amp; job = <? PHP echo $row_rsJobs ["IDTravail"];? > "> delete < /a > < table >"
  < /tr >

  <? PHP} while ($row_rsJobs = mysql_fetch_assoc ($rsJobs));? >
  <? PHP} / / show if recordset not empty? >

  < /table >

  And finally, this is the query that I need to add to my current request to show the resutls of the two tables:

  
  @mysql_select_db ($database_conndb2, $conndb2);
  $query_rsJobTrans ="
  SELECT
  tbl_projects.projID,
  tbl_projects.projtitle,
  tbl_jobtransline. JobID,
  tbl_jobtransline. FK_projid,
  tbl_jobtransline,
  tbl_jobtransline. FK_langid,
  tbl_languaget.langtname,
  tbl_jobtransline.jobpages,
  tbl_jobtransline.jobshipped
  Of
  tbl_projects
  JOIN IN-HOUSE
  tbl_jobtransline
  ON tbl_projects.projid = tbl_jobtransline. FK_projid
  JOIN IN-HOUSE
  tbl_languaget
  ON tbl_languaget.langtid = tbl_jobtransline. FK_langid
  WHERE
  tbl_jobtransline.jobshipped =' no
  ORDER BY
  FK_projid ASC";
  $rsJobTrans = mysql_query ($query_rsJobTrans, $conndb2) or die (mysql_error ());
  $row_rsJobTrans = mysql_fetch_assoc ($rsJobTrans);
  $totalRows_rsJobTrans = mysql_num_rows ($rsJobTrans);
  ? >

  
  I don't know if it's possible and tried it myself but seem to get a little bit of mess, since both tables use a foreign key to the projects and language tables, any help would be most appreciated!

  Add tbl_jobtransline to the query and join the other two tables? What exactly is the problem?

• Prices of gold and silver - Stocks App

  Hello

  I tried to add the price of gold and silver to my request of stocks (like I did for a long time, as well).

  I tried to put exactly in "XAUUSD = X" and "XAGUSD = X", but none worked. This shows simply 'no results found '...

  I tried to find him with another iphone where XAUUSD = X is already in the list, but it does show also no results.

  Tested with iOS version 8.4 and 9.3.1 and Iphone 6 Iphone 5s.

  Thanks for your help!

  Just tried to add gold and silver prices to two Iphones. IPhone 6 and 6s with iOS 9.3.1 as well.

  Same problem as mentioned above. It does not work...

  Would be very grateful for any help!

  Thanks in advance.

• Satellite L500 - 19 X: install Win7 - stuck on syswow64 loop won't work?

  I tried to reinstall Windows 7 on Satellite L500-19 x, but he will not - do whenever I have start computer laptop a white screen pops up saying "preparation for installation... may take a few minutes" but it never goes away... can exit from this screen by starting the Task Manager and hit escape a few times.

  When get as far as office things seem to be in order with the exception of the running Syswow64/sysprep/...access command prompt is denied on the continuous loop, there is also a window saying 'TUPIT 2' which seems to have failed because there isn't "requested registry access is not allowed" in front of it.

  Would really appreciate if someone could tell me how to solve this problem, because it is extremely frustrating and seems to be so close yet so far to be successful!

  Hello

  This message is very strange. Read on the internet about similar problems, but the questions were always related to registry problems.
  In most cases, the error message appeared trying to repair the Windows operating system.

  Have you tried to do a clean install?
  I think you need to format the HDD first before you try to install Windows 7.
  I hope that everything would be erased from the HARD disk before starting the installation of configuration