Prime Minister garbage 2015

Similar Questions

• Prime Minister CC 2015 can be updated?

  I remember the video in April on a update for first CC 2015 may. I missed something?

  Hi SMG720,

  The next update will be out (no ETA) soon. There was no may updated as has been pointed out by Jim .

  Best,

  Regalo

• Audio file corrupts when I import it to the Prime Minister.

  Hello

  I have an audio file recorded on a recorder in. MP3. It plays OK on the recorder and the Imac, but when I import to a project in PP CC 2015.4 there an audio from 1 sec it repeats. I can't yet make out is part of the original recording.

  Steps tried: -.

  1. I deleted the record off the coast of the Imac and re-imported to the coast of the recorder. It becomes correct when played on the Imac, but corrupts again when they are imported as mentioned above.

  2. I started a new project and imported the audio after going through step 1. and the same 1 second repetition happens.

  3. I tried to delete the original file on the Imac and create a new one in a different folder. Then important recording to him. He plays very well, but then again corrupts when imported to the Prime Minister.

  Below is a screenshot in the first pro of the imported file

  Any ideas please?

  Thank you

  Paula

  

  Of course, I don't know what the settings were for the mp3 file, the compression and the frequency Hz... 44100, 48000, whatever... sometimes PrPro does not as well with MP3s as others. And it's sometimes better with other types of audio file.

  Have you considered conversion that perhaps WAV or something?

  Neil

• HI, I want to be adopted, the Prime Minister and after effect... what I please

  HI, I want to be adopted, the Prime Minister and after effect...

  I have a window of 10. I am a beginner

  What should I do please?

  Hi Khaled,

  I checked with your Adobe ID / Email ID on the forums and did not find any subscription registered ago bought.

  So, if you are trying to install the evaluation version of 2015 CC of these please refer to the below given link:

  Download and install Adobe Creative Cloud apps

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul

• Happy Valentine's day! -What do you LIKE about the Prime Minister?

  What would be a feature of Prime Minister that you like the most and why?

  My favorite is the feature of my list that allows you to add your favorite S & P items and save them with a description that makes more sense for you.

  Link to a Webinar that covers this functionality - using my list and reports to the Prime Minister

  Manish

  I like the feature of report - easy to use!

• Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram? And the Windows 7 Professional upgrade will solve this problem?

  Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram?  And the Windows 7 Professional upgrade will solve this problem?  Does anyone have this done successfully?

  Not all programs can use more memory, so if you have a problem you must specify what the problem is, with what program

• I have to run windows security when I am currently using Norton 360 Prime Minister?

  I have to run windows security when I am currently using Norton 360 Prime Minister? Thanks (in advance) for any help with this?

  Personally, I do not recommend norton but his preference of the user.
  See thishttps://blog.kaspersky.com/multiple-antivirus-programs-bad-idea/

  Choose an anti-virus program<>(are much more free/paid, good antivirus and make a decision to find a suitable antivirus for you, you can see the link... ) Selection of a good antivirus is only ( up to the preference of the user)

  Microsoft recommended anti-virus companies are here... http://Windows.Microsoft.com/en-us/Windows/antivirus-partners#AVtabs=Win7

• Importation and LABELLING of the AVCHD files on disk hard ext to the Prime Minister

  3 questions (I'm on an iMac)

  (1) I brought the AVCHD (entire file) files from an SD (Sony PXW-70) to an external hard drive.

  Hard disk, it is not possible to see individual clips to open the file "AVCHD".

  When I click on it, I see the individual clips. I can not re - appoint these clips. They are

  Clip #1 Clip #2 etc how ca label clips while remaining hard disk, before to do first?

  (2) I imported the files in the folder of the hard driveI first and then named the clips (with numbers).

  When I open the project a) it says media is offline. so I have to manually link the media b) media other shoots

  that have the same number or clip 00002 become confused and shows it to the top. Help!

  I spent an hour and a half with the Prime Minister on the phone including coming on my desk and then they told me I should

  chat with SONY (camera) and see what Extractor they recommend.

  THANK YOU FOR YOUR TIME

  Consuelo

  https://www.bhphotovideo.com/c/product/1072752-reg/sony_pxw_x70_professional_xdcam_compact .html

  Do not rename the files as a logging.

  Copy them to folders separated from each card so that the file numbers are not incompatible. for example "rushes" map 1 "rushes" card 2 etc...

  Ingest them in tubs of project same distinct file naming protocol.

  Save the files using the Description field

• How well the Prime Minister compresses black video

  Hello! I haven't used Premier for more than a decade, so I am familiar with all the progress made over the years and consider myself a complete newb at this stage. I have been using Blender for video editing for years simply because its what I model with, so I thought why not use it to video as well. Only video editing as I do, it of when I have my video game screenshot and chop them up to do previews/trailers. This new game I worked on is very dark, a lot of black. When exporting a mpg of Blender, unfortunately, this black turns to a gray deformed pixel (absolutely terrible). So I wonder if the Prime Minister will do a better job with these dark scenes.

  Before that I have to download the Prime Minister and get this project going, I thought I get expert advice! The Prime Minister will work for what I need? Are there steps/tips/tricks I should know to ensure that dark colors come out perfectly crisp and clear?

  Thanks in advance for any advice!

  Blacks and just tones above that are cheaters, you know!

  Very different monitors, settings and such do strict control of these values once they have left your monitor/system virtually impossible.

  That said... If you have your pretty well calibrated configuration, with a puck to Rec709, test and saw the outputs either a right good TV program installation or in your case, download & software discovers through multiple browsers or YouTube apps on different computers/devices, you would be able to establish the parameters that seem to work for you.

  I suggest to get very familiar and comfortable with litters the fashion Parade RGB and waveform, also. Maybe the histogram, but Parade and waveform in particular.

  I would say that the week trial they wouldn't necessarily you give time to test this, but you might be able to make their appearance in a week.

  Once you know your material, how to get it to a constant-frame-rate capture PrPro to work with it, you should be able to master with some tests and practical to get the low tones where you want.

  Neil

• help with installation of Prime Minister

  My elements of Prime Minister will not install on my new hp envy. It passes through gently, until she says to start the installation, then charges to 2% and fails

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Exactly what version of the program do you have problems?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Prime Minister on screen GUI - always REC 709 color management?

  As I just changed the other day, I changed the monitor ICC profile on my Mac with the first editor open and I noticed that the video displayed in the program window has not changed with the change of ICC profile color.  It took me by surprise.

  It seems that the Prime Minister handles the output of the color of the video you are editing on your monitor GUI to assume she's still REC 709.  Am I right in saying this?

  If so, it is also an internal conversion on the fly to the release of the video to watch on sRGB?  I know that there is a difference between REC 709 and sRGB gamma.

  Any guidance would be appreciated.  I want to just make sure you understand exactly how the video is interpreted in the program and windows from the source in the Prime Minister.

  Ah! OK, I see what you mean. Let me see if I can break it down. Here's a quick overview of the interpretation of RGB vs. YUV.

  What is Pro P YUV (YCbCr) and RGB color spaces?

  as you have proved, the rendering engine of cuda is separated from the user interface. You can control it a little bit with Nvidia Control Panel reading

  the software that controls your video driver.

  That's why you need to calibrate your monitor sRGb or Rec.709 0-255 gamma 2.2. First will act as a passthrough.

  You are not actually control first, just what your eyes see. Make sense?

  As AE with color management, works the same way... passthrough. It's the same concept as turnining on the colors of the AE management

  then using view - simulate Rec.709. It will look exactly the same! (in this scenario, simply let power off in AE that he's slowing down!)

  also:

  issuance of mercury is always too paralyzed to Rec. 709. You need to calibrate your external monitor to that as a passthrough

  Details of video preview with mercury pass in the 2014 update after effects CC | Creative blog Cloud by Adobe

  as I said, if you want to preview with P3 or Rec. 2020, you need a custom for Lumetri to "burn" in the correct color LUT.

• I have adobe Prime Minister 13 items and it will not be exported my file to fit my file should be 1.3 GB, but rather after his fact make its similar 300 MB

  I have adobe Prime Minister 13 items and it will not be exported my file to the right size, my record should be 1.3 GB but instead he makes like 300 MB or 24bites

  I figured it out unfortunately I had to erase my entire computer. I think I had some kind of virus that could not find my anti virus. Adobe works fine now.

  Sent from my iPhone

• Prime Minister rendered color is * red *...

  Hello world

  I'm fairly new Prime Minister.  Just a video I worked on was made.  Video rendering looks like * red * in my preview of mac and Quicktime apps in the first app.  I tried to export the video with a number of different options but unforts same result.  * However * I just noticed that if I import the video rendering first, it seems more red, it seems that more red when I play the video outside of the Prime Minister.  Strange...  This makes me think the Prime Minister is not setup correctly, as the color does not match with other applications such as mac and Quicktime preview.

  Any suggestions how I can match color to the Prime Minister for other applications?  And how I can make the file, so it doesn't have this red color cast?

  See you soon!

  Jack

  Its the qt player, it's a problem of gamma.

  Use VLC.

• Prime Minister of adobe download

  Buenos dias, I have a problema al download the application of Prime Minister, there are only me appears an error are el 204, problemas al access has a file/directory important durante the descarga. Not be debo hacer para solucionarlo, pero ask me urge descargar el programa.

  Thanks for the help.

  Moving to the cloud creative download & install

  Hello

  Please see Troubleshooting FAQ: what should I do if I have trouble downloading or installing the cloud creative and creative Cloud applications?

  Hope that helps!

  Kind regards

  Sheena