Print airport extreme, printer laser HP P1005 and iMac snow leopard computer wireless

Similar Questions

• Printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out

  I have a printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out. I can't find the ink level monitor. Can you help me?

  If all else fails, read the user guide:

  http://files.support.Epson.com/htmldocs/sc88p_/sc88p_ug/wwhelp/wwhimpl/js/html/wwhelp.htm

• Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  I got a modem Comcast/Xfinity upgrade. Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  Whenever you change the modem or modem/router on a network, AirPort Extreme will be reset to the default settings and then set it up again to work properly with the new modem. For this he would be...

  Turn on AirPort Extreme for a few minutes... If it is not already turned on

  Hold in the reset button on the back of the AirPort Extreme for 7-8 seconds, then release it.

  Allow a minute for the AirPort Extreme restart to a slow, flashing amber light status

  Make sure that an Ethernet cable connects to one of the four LAN <-->Ethernet ports on the modem/router on port WAN "O" on AirPort Extreme

  To start the Setup program, click the WiFi icon at the top of the screen on your Mac and are looking for a list of the new AirPort base station

  Just below that, click directly on the AirPort Extreme and then follow the prompts for configuration "Wizard".

  When you configure AirPort Extreme once again, you can use the same wireless network name and the same password that you used with AirPort Extreme with the 'old' modem, if you wish, or use a new wireless network name and password

• Format and install Snow Leopard on Mac Mini

  Hello

  • I have a Mac Mini
  • Using boot camp, I have a Win10 partition which is now, the entire hard drive.  Really.
  • I have the installation of Mac OS X Snow Leopard (10.6.3) DVD
  • I directly connect the optical drive and a wired keyboard to the system
  • Start by pressing the [CTRL] key.
  • Download the white screen with the Apple logo in the middle of it.
  • .. then nothing.  He's here.  After 10 minutes, I pull the plug and restart the Windows partition and return to the slaughter of these discussion forums for clues.

  Issues related to the:

  1. How do I FORMAT and INSTALL Snow Leopard on the Mac Mini or m, I was too impatient after the [Ctrl] restart using the OS X DVD? 
  2. Is there an external utility that I should get to format the drive?
  3. I can do this in steps - can I install OS X on an external HD and then use it for the crater / rebuild the primary drive?

  Input greatly appreciated!

  Rade

  usually it is booting by pressing the C key to start from the CD-ROM/DVD-ROM drive.

  or start by pressing the Option key to get a list of the bootable devices that you can choose from.

  See <Startup for Mac - Apple Support combinations>

  NOTE: This does not imply that you run your Mac mini Snow Leopard.  I guess that your wording she used to run Snow Leopard, and that your Mac mini still has a DVD/CD player are good signs.

• Can I connect a wireless modem to my Airport Extreme base station via ethernet and then connect this Ethernet modem to my TV to pinterest?

  Hello

  I want to connect my TV to my Airport Extreme via ethernet, so I can run Netflix. Can I just the branch? Can or, if it does not reach, I use an old router as a bridge linking to the Airport via an ethernet cable and connect the router to the TV?

  Thank you

  Lisa

  I want to connect my TV to my Airport Extreme via ethernet, so I can run Netflix. Can I just the branch?

  Yes.

  Can or, if it does not reach, I use an old router as a bridge linking to the Airport via an ethernet cable and connect the router to the TV?

  Yes. It is also possible, but only by using an Ethernet switch instead of a router would be a better solution. The important thing is the total distance of Ethernet between the extreme and the TV. Ethernet is limited to 100 m (328 ft)

• Which printer works with 10.6.8, snow leopard and more advanced:

  What printer will work well with system 10.6.8 v.1.1 and leave like lion, mountain lion, Yosemite and same El capitan? Work on snow leopard and have a MacBook Pro bought in 2010 and that works very well. Would I be able to upgrade to El capitan? Received a message a while back from Apple to install makes me believe it's possible. And no problem, the upgrade to all the other intermediate systems mentioned? Have been looking online for a reliable site for printer, but have not found a definitive.

  Please take a look at...

  https://www.Apple.com/OSX/how-to-upgrade/#hardware-requirements

  Who should you help to see if your model is supported & see what features it supports.

  Have you already 10.7, 10.8, 10.9 and 10.10 purchased in your Mac App store account? Apple has removed these from the store so you can't buy more. You can download them only as a "purchase".

  You don't need them if your Mac can run 10.11, you can ignore the versions if you wish. Backup before you apply any update - just in case where do multiple backups

  What about the printer - I don't know, sorry, you need to wait for others to answer or try Google, etc.

• I can not long print documents from my iMac/Snow Leopard / HP Laserjet 2300dtn combo. because everytime I try, a message pops up: ERROR: A Fax number is not provided. There is no mention of "fax" in the "print and fax ' file in Prefs system.»

  I use an iMac 2011 under Snow Leopard, but it can no longer print documents via my hp laserjet 2300dtn printer. Reason: whenever I try, a message appears through the PRINT icon in the Dock, read: "ERROR: has not received a Fax number. There is no fax option in the Print & Fax window in the System Prefs so I have no idea about the origin of the error message, but suspect there is corruption in the printing preferences.  So I went username/library/Preferences/com.apple.print.PrintingPrefs plist... and a file is moved to the trash. Unfortunately, the problem is not resolved. I am far away computer and would love advice for this situation.

  Try to reset the printing system.

  Reset the printing system

• Photosmart Premium Fax all-in - One Printer - C309a will print on Mac OS 10.6 Snow Leopard

  I downloaded the latest drivers from HP driver downloads, connected the printer using USB and installed the software.

  Whenever I try to print as a document of the text of the e-mail etc after a second a red mark appears on the printer icon in the dock.

  When I open the printer utility reads the printer is paused and the document is displayed in the queue, I click the button back light on icon turns green, and then it goes again to the red.

  I remove the file from the queue and try again, but still the same thing happens.

  I tried scanning the documents and that works very well, the installation of fax software program and who ran a test that was fine, it prints, it will not be printed on a cd either, I use the software printer comes with Roxio Toast, once I had installed the printer software I ran the update of Mac util software and enabled him to install an update He finds, but still does not print.

  Any help would be appreciated please.

  Under Snow Leopard on an iMac.

  Jim

  ---------------------
  Jim

  No, it does not include one application scan, other than that I can scan from the printer using the preview and now the Image capture, so that's something.

• C3180 printer has been disconnected software-wise (Snow Leopard)

  I loaded the 5 Jan snow leopard.  No problem printing until yesterday. It was the first time this month for a sweep. Went to the HP website with the question on that.  Got a long printed "scanning software does not open or is not responding in mac OS X V10.4 ' following instructions. When I'm at the point of the Printer Configuration utility this utility disappeared.

  So I dug around the memory of the computer and found the software used to configure the printer. (a C3180).  I ran it.  Now, if I want to print something, the printer is on a permanent BREAK.  Failed to contact HP - they have a phone problem that makes my incomplete call.  Someone knows how to help?  Peter

  
  

• HP Photosmart 7760 and Mac Snow Leopard

  I just had to get a new computer... under Mac OSX 10.6 - Snow Leopard.

  Everything installed beautifully, but my old Photosmart 7760 inkjet printer will not work.  When I go to print, the printer window opens and displays "error".  I reinstalled, I disconnected and reconnected the printer, I restarted the computer.  I went to a few other blogs help - no help!

  Can anyone here help me?  I really don't want to have to buy a new color printer. It still works very well!

  TIA!

  I finally found it - I knew there must be an answer!  HP downloads didn't work, but Apple support was a universal HP driver download.  The moment where I downloaded it, the old Photosmart printer worked like a charm.

  Thanks to all who responded.

• Novice user! Must remove HD and reinstall snow leopard please

  I have an old Power Mac with my old stuff and that you don't remember the passwords. I want to remove the full HD and re-install Snow leopard (I have the original disks) how do I do this please.

  Click here and follow the instructions. When you reach step 5, insert the original disc or a DVD compatible detail, restart with the C key or Option key, use disk utility to erase the internal drive and install a fresh OS.

  A PowerPC Mac can't run Snow Leopard 10.6, and were originally shipped with Leopard 10.5.

  (142401)

• Running same virtual machine in the Lion and the snow leopard cause problems?

  I just loaded a new hard drive with Mac OS X Lion to run some programs that run only on Lion.  My Mac serves mainly through Snow Leopard installed on the main hard drive.  I can boot to an OS or the other.  Two questions:

  (1) can I have my a copy of VMware Fusion 4.1.1 installed on the disk of Lion and leopard snow by car?  Of course, I can only use one at a time since I can start only upward in an OS.

  (2) if I do the above and open my Windows XP VM on Lion, are all changes to the virtual machine that would make it unusable under Snow Leopard (or vice versa)?

  Bill

  Make sure that your VM is off - not suspended--before the host.
  Then it should work without problem

• I disconnected the printer laser jet hp1000 and plugged back in but I'm unable to print

  HP 1000 laser jet does not print after that I unplugged the system and moved to different field help me please

  Hello

  Try uninstalling the printer and then reinsert using the latest drivers for your operating system

  You can get to this HP link by putting your printer model number > and then the operating system > etc.

  He also will be troubleshooting for you information there.

  http://WWW8.HP.com/us/en/support-drivers.html

  See you soon.

• LR 3.2, the Mac Pro and the snow leopard, it's impossible to choose locations of storage-catalogue now?

  Sorry if cela a detachment to repeat ad nauseam, but I did a search and found solutions to Win7 only, so this is:

  I just got my new Mac Pro all together towards the top, and when I went from LR 3.2 Prefs and the catalog settings I see more a choice on where I can keep all my .lrcat files.  On my G5, I used one of my external drives for all of my Lightroom catalogs and always want to use the same folder, so I don't keep loading my system drive > users folder where LR seems to want to put the cats.  Can we not choose the location most?  I hope that's not true.

  Why do you prefer? Lrcat file is simply stored where you indicate he should go when you create a new. It can be anywhere as long as it is not a network drive. You get just a standard file browser dialog that you can point to anywhere that you want.

• Network configuration of Roaming Wifi problem I just bought an Airport Extreme and I intend to use it as my router

  I just bought a refurbished Airport Extreme and I intend to use it as my router & combine with our old time Capsule of existing one to create a roaming Wifi network.

  The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)

  Our small ethernet is connected to my iMac [mid 2010 running OSX 10.11.5] & a PC and extends up to 2 other domains through an ethernet switch.

  This configuration works very well, our internet speed has improved slightly - better than our old T-Link router bit.  WiFi available throughout the House - better on one side.

  Time Capsule (2 TB) is connected by ethernet on the far side of the House, offer backup Time Machine and strong Wifi to this area.

  This time Capsule was an existing installation that went perfectly with the T-Link before I bought the Airport Extreme.

  I used the Airport utility to set everything up and it seems to work.

  The problem is:

  Combines the Capsule and extreme connected & active, the Internet gradually slows down and grinds to stop. -Wifi seems to follow suit, but is much more gradual.

  If I disable the Time Capsule, the internet connection is back to normal, Airport Extreme Wifi signal is strong and extends to almost all areas.

  I got to the departure of the two units configuration problems, so I reset both factory default and from that moment managed to do all this work - with the exception that the internet connection slows down.  Whenever I visit a different web site, it takes more time to load/link upward.

  I spoke with our ISP, the link to our tower is solid. The technology suggested that I put Wifi on each unit to use a different channel (2 frequencies & several channels each available).

  So far, this has not resolved the problem, I will continue to make adjustments.

  I googled this - most of the answers are not to date - usually 2012, 13, 14. and not directly related to my situation.  But I will continue my search.

  I'd appreciate if anyone here has any suggestions

  The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)

  What is the number and the model of the modem or modem/router that your ISP has provided you?

  Should we assume that you use a Mac with the help of a current or recent operating system?

  If you get out of the Capsule of time and leaves disabled for now, the network AirPort Extreme continue to run at full speed for a few hours and not slow down?

  We ask these questions because we must first confirm that the AirPort Extreme works properly until we can begin to troubleshoot the connection to Time Capsule.