C3180 printer has been disconnected software-wise (Snow Leopard)

Similar Questions

• Photosmart 5510: my version of windows is replaced by windows 10 and my hp printer has been disconnected.

  My version of windows is replaced by windows 10 and my hp printer has been disconnected. Please help me to connect without disc

  The problem is not yet ressolved. The printer cannot connect to the wireless router.

  Test report says wireless network name (SSID) found "Fail".

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• the device has been disconnected or is not available

  I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

  Help, please!

  Currently, my version of the MacBook has been OS X 1 10.11.4

  its MacBook Pro OS X 10.11.4

• Updated Firefox to update automatically so that the internet has been disconnected, and now it's showing I updated Firefox. What should I do?

  I started Firefox even if the internet has been disconnected. But before opening, Firefox updated automatically, not advising me that I was disconnected. It shows now that I have the newest version of Firefox. What should I do?
  Operating system: Windows XP Professional Service Pack 2.

  He's going to have downloaded the update while you were connected and the next time you start Firefox, it will have installed upgrading if you were connected or not.

• HEX 0x8BBB0011 as the connection to the server has been disconnected

  Hello

  I use a shared variable of the network to control a loop in FPGA in cRIO 9073. 1 for a month, the program was runing without any problem, but suddenly, the VI is thrwoing an error

  "HEX 0x8BBB0011 connection to the server has been disconnected.

  The error or warning occureed while writing the following shared variable

  \\NW-cRio\NW Library\NW_Force_cal

  \\169.254.106.130\NW Library\NW_Force_cal ".

  A screenshot of VI is fixed, the NW_Force_cal is highlighted.

  After the VI has been shut down and restart the VI took over running without problems. This kind of unpredictable behavior is very difficult to manage, I lost data in real time during 12 hours of recording because of this problem.

  Please suggest a solution for this problem.

  Thank you

  Guilhem

  The error has explained the issue.  The network had problems that led to the server being offline.  How to solve this problem is to understand what is meant by "real time".  It's just another way to describe a deterministic calculation.  In other words, the program ensures that everything will happen within a predetermined period.  Order things to be deterministic, they must be controllable.  The most obvious way to break the determinism is to prompt the user for entry.  As we cannot guarantee clearly not the user will respond within a given period, can no longer call the deterministic program.  In this case, we have a more subtle break of determinism.  Relying only on a network will break determinism.  It is not simply a way to ensure that the network is not getting hit harder than usual.  In this case, the network was down for a period of time long enough to raise an error.

  Here's where we get to fix things.  Once the error has been generated, the code to do with it?  The wire of the error is not used for anything else.  I expect to raise an error and stop the program.  Clearly this isn't the desired behavior.  So, why we do not use the wire for an error handling?  In case of error, you can connect the data locally.  When you cover the network, you can clear the log to the host PC that you usually use to collect your data.  This command removes the dependency of your network for the code works.  With the help of a more robust code solves the problem with the relatively easy error management.  Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.

• HARDWARE ICON SAFELY REMOVE A MISSING SINCE HP PRINTER HAS BEEN CONNECTED TO WINDOWS 7

  HARDWARE ICON SAFELY REMOVE A MISSING SINCE HP PRINTER HAS BEEN CONNECTED TO WINDOWS 7 ON MY VAIO LAPTOP. HOW THIS CAN BE FIXED. ALL THE ALTERNATIVES ON THE FORUMS OF WINDOWS FAILED

  Hello

  Thanks for posting in the Forum from HP Support.

  Please, use system restore to restore your files and settings Windows system to a well known state before this "junk" change that's happened.

  Here is more information on restoring the system-> http://windows.microsoft.com/en-us/windows/what-is-system-restore#1TC=windows-7

  Instructions on its use on Windows 7: http://support.hp.com/hr-en/document/c01835735 & http://support.hp.com/hr-en/document/c01835735#AbT4

  Please, let me know if I can help you further.

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• HP CM1017 MFP Jet ColorLaser: Printer has been suspended.

  The printer has worked for me over the past eight years - but yesterday I could not print anything at all. A pop-up shows saying "this printer has been suspended. You want to resume printing? If you do not want to resume printing of jobs, you can add this job to the printer to print later. "If you select summary, labour will automatically be added to the printer.

  I click Add to the printer, Rusume and turn on/off the printer - but I got the same message every time I tried to print something. I will appreciate if someone can help me solve this problem.

  Thank you very much...

  Nof38

  Since you have a Mac, I'm not real familiar with it but in Windows, you can suspend or resume employment through the print queue, you can also pause the printer.

  So what we need to solve is how to regain your queue that is more a question of Mac OS.

  You might even be able to Google that question and get the answer to your problem.

• Your history file drive has been disconnected for too long. Pour garder keep save copies of your files, reconnect your player, then run a backup.

  Original title: plug your drive (Important)

  Reconnect your player (Important)

  Your history file drive has been disconnected for too long.

  To keep save copies of your files,.

  Reconnect your player, then run a backup.

  Recently installed window 8.

  Upgrade Windows 7 clean boot.

  Inspiron 580 s 1 TB

  Windows 8.1

  After TWO YEARS, someone should be able to give us a step by step, to "reconnect" an external, USB hard drive!  I unplugged and then plugged it, several times, without success.  I seem to have this problem with one of my disks USB, a Toshiba.  Access the drive through files Explorerer, seems to work, even if it is "disconnected". Historical files only has problems. Strange! Could it be the drive itself, or it is plugged in to the USB port?

  I had the same issue this morning and found a solution that worked for me.

  This post helped: Windows - historic community of 8 files windows does not recognize my drive hard iomega

  NOTE:

  -make a backup copy of the files you delete first! (just in case)

  -J' had deleted my old historical records from the files on the ext. HDD, so I lost no data. I can't guarantee that the ancient history of the file will be there if you remove the configuration files, as described below. In my opinion, it shouldn't happen, but since I have not tried, I can't guarantee that.

  After checking my disk for drive errors (none) and update the drivers (not not mandatory), I went to this location of records:

  C:\Users\your user folder\AppData\Local\Microsoft\Windows\FileHistory\Configuration

  and remove the four files that were on it. Because they determine the configuration of the file history, when I ran the service once again, I could set up my drive as if it had never been used before. I started historic files, and it lets me choose my hard drive and run the backup as it should.

• Try to reconnect the file history and then try to restart it, it says has been disconnected.

  Original title: Ihave even question rereconnecting windows player 8

  I tried to re connect my history of file player from what I've read, will reconnect the file history.  you try to restart it, it says has been disconnected. How can I reconnect it them. has the red x on the icon

  Hi Larry,

  1. What is the full error message that you receive?

  2. you try to connect an external USB driver for backup?

  You may receive this error message if the external hard drive is not properly detected.

  You can consult the section "Reconnect your drive" article and check:

  What happens if something is wrong in the history of the files?

  For more information, see the articles:

  Restore files or folders by using the history file

  Set up a drive to history file

  Protect the user with history of files files

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• vSphere Client Web - console has been disconnected...

  Just installed 6 ESXi and vCenter 6.  I try to open a console to a virtual machine from the Web Client vSphere.  I click on action-> open Console - > new Web page opens and which is completely block it displays this error message at the top.   Any ideas?

  The console has been disconnected. Close this window and restart the console to reconnect.

  
  

  
  

  
  

  restart the virtual machines seems to have solved this problem.

• The session has been disconnected

  Hi all

  I'm building one laboratory view 5.2 in my office... Because this is a laboratory environment, I could not use router company (I'm not the router admin), so I put an another Juniper 5GT as audit router...

  then I put 2 servers esxi 5.1 and 5.2 venter/view

  then I clone an ent as view desktop VM win7... then I use my ipad to connect to the server and then connect it this VM Win7... I received a message below

  "Desktop load attention".

  Your desktop is loading too slowly. You may need to activate your VPN to connect.

  Click on 'OK' " "

  then he continues to run... and I also check the Web Client to view events... I see that the user account has log on to view & this VM Win7...

  After customer view fill the bar running, it shows

  
  

  "The Session has been disconnected.

  Lost connection to server. "

  value this juniper IP route default of the machine I need?

  Thank you!!

  wyldkao

  Almost certainly a problem of remote access configuration PCoIP. Just follow the 3 steps here setting up remote access with a view PCoIP 4.6 and newer , and it'll work.

  If you still can not configure it correctly, watch the video that goes through him more in detail.

  Let us know what it was.

  Mark

• My expansion drive has been disconnected, and all the files that have been renamed on Premier Pro are missing!  Help!

  I use Adobe first Pro CS5.  I'm working on a project for a month and this morning, I realized that there is a problem with it.  To make sure that I don't junk my computer upwards, I have always to leave the files I'm working with my expansion drive and I work from there.  I have autosave all the time, etc, but apparently, at some recent point, my disk expansion has been disconnected, and Premiere Pro tells me that all my files are offline.  My biggest problem is that I've renamed all my video files in Premiere Pro, but I not rename them on my drive for expansion.  Thus, for them find would probably take me as long, if not more, of my original work.  Is it possible in the world that I can record these files and the long hours that I've already spent editing this video?  If you have an idea regarding what I can do, I would be eternally grateful.   Note: I work with AVCHD clips.

  Please, I beg you.  Whatever that is would be helpful at this stage.

  Make sure that Premiere Pro is closed, and reconnect the drive.  Everything should be good when you reopen the project.

  The exceptions are two.  Bill has raised the first.  The second is that if you have already saved the project with offline files.  Once you do that, you're done.

• Officejet 5610 all-in-one printer has been installed and is not printing... Please help... :))

  Officejet 5610 all-in-one printer has recently been installed (I had printer for 4 years) and now does not print...

  Hello

  1. you remember to make changes to your computer?

  2. you receive error messages when you try to print?

  Try the steps in the following article: printer in Windows problems http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows