Print from TO Laserjet

Similar Questions

• Install a printer LPT1 HP LaserJet 4 L printer USB port in Windows 7

  Before this "incident", I was able to print from my HP LaserJet 4 L (LPT1 to USB) printer.  I still have the correct driver.

  I was forced to do a clean install of Windows 7 Ultimate and lost the ability to print from my LaserJet.  Windows only allows you to install it as a USB printer, but stop there in recognition.  I need to go beyond that point.

  It was working before and I know it can work again.  I just need help to get there.

  Hello

  I realize has the inconvenience that you are experiencing with the impression. I will certainly help you to question.

  Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  I suggest you check the steps mentioned below:

  Method 1:

  Run Troubleshooter printer and check if this can help:

  Open the printer Troubleshooter

  Method 2:

  Restart the Printer Spooler service and check if that helps.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform these steps.

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2:

  See the link below and check if it helps:

  Diagnose and automatically fix problems printing and printer

  For more information, you can also check out the link below:

  Solve printer problems

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• HP LASERJET 4050: HP LASERJET 4050 PRINT JOBS WILL NOT PRINT FROM TRAY 2

  I have a HP Laserjet 4050 printer and it won't tank prnt 2.  It prints from the manual feed tray 1.  It does not recognize tray 2 printing, but it will let me know when the tiroir2 is missing.  No idea what this could be or how to fix it?

  Any help would be greatly appreciated.

  Toni

  If you print a configuration page using Tray 1, then you can look and see what paper size and type it thinks are in tray 2.

  You will see probably is one of these elements is bad and most likely it is misdetecting the size of the paper due to a failure of the Board of Directors that detects the position of the fingers on the side of the status bar.

  I think you have probably found a message on the screen that says load paper in Tray 1 whenever you try to print from tray 2, if this is the case it should also allow you to hit the go button and print using any type of paper or the size it considers is in tray 2.

• The model HP LaserJet 2430 Q5964A only print from the manual feeder

  The LaserJet printer will no print (Tray 1) manual feeding.  We need the printer to print only starting from tray 2.  I tried to change the settings to the local node as a server-side.  I tried to make the Tray 1 not available both client-side and server without result.  Regardless of what I select settings, the printer will always say, ' manually feeding heavy extra paper.  I do not use a card stock.  I use a brand line 2 MACO of 10 very similar to Avery label sheets.  How can I get the printer to pass the Tray 1 and only draw starting from tray 2.

  Please, do not provide generic answers to change the size and type of paper.  I did this several times.

  Currently, tray 1 is A4 size, and the Type of tray 1 is labels.  I also settheis to envelope #10.  No matter what is put here the printer insists on the use of Tray1.

  Tray 2 has currently the size value LETTER.  Default paper size is set to letter.

  

  Without the help of HP, on mine I found a solution.

  1 remove the printer from the server

  2. go to the computer of each user who uses the said printer and remove it form the devices and printers

  3. return to the server and add a printer again (used PCL 6) since August 2013 instead of new

  4. replace in the computers of users and add the printer again.

  5 test printing.  It worked correctly in my situation.

• LaserJet P2035n goes into infinite loop when you print from Windows 7 64 bit

  I installed the latest drivers from this site for Win7 64 bt and whenever I try to print on my laserJet P2035n on the network, it goes into a loop and sends the same print job again and again until I cacel work on my PC.

  Anyone know why this is happening and how reolve it?

  TIA,

  Joe

  According to HP tech who helped shed some light on this for me

  for Windows 7 32 bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1845552&prodTypeId=18972&prodSeriesId=1845551&swLang=8&TaskID=135&swEnvOID=228

  for Windows 7 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1845552&prodTypeId=18972&prodSeriesId=1845551&swLang=8&TaskID=135&swEnvOID=2100

  Right-click on the file, choose Properties, and select the appropriate compatibility mode that corresponds to that specific folder that you downloaded.

  HP technology has solved as fast it takes to install a printer successfully. I went and done it for the rest of the printer to the breast of our society and all the world works perfectly.

• How to print from the iPad on LaserJet p2015dn which is connected to my network wireless Ethernet?

  How do I print from my iPad 2 on hp LaserJet p2015dn which is connected to my network wireless capable Ethernet?

  Hello

  Thanks for the post.  I have included a link below that can help with printing from your iPad.  Please read carefully to ensure that your situation meets the requirements.   HP ePrint home and Biz.  Good luck!

  https://h30495.www3.HP.com/help#mobile_apps.Ma-printer-issue

• HP Laserjet 1022N: unable to print from IE11 to, HP laserjet1022n HP Windows 10 machine

  I am able to print without any problem at all on my new HP computer applications, but with the exception of Internet Explorer 11.

  When I try to print my internet Laserjet1022n explore closes and we must open.

  Event ID 1000 and source of Application error.

  I uninstalled and reinstalled the printer (connected with a usb cable)

  I would be grateful all the other tips!

  Again, all applications other than IE11 print very well!

  The details are below:

  Log name: Application
  Source: Application error
  Date: 12/07/2015-21:02:03
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Computer DESK-8U0DERA
  Description:
  The failing application name: iexplore.exe, version: 11.0.10240.16412, time stamp: 0x55b99d3f
  The failed module name: ntdll.dll, version: 10.0.10240.16430, time stamp: 0x55c59f92
  Exception code: 0xc0000374
  Offset: 0x00000000000ea28c
  Process ID vulnerabilities: 0xaa0
  Start time of application vulnerabilities: 0x01d13131da821932
  The failing application path: C:\Program may Explorer\iexplore.exe
  The failed module path: C:\windows\SYSTEM32\ntdll.dll
  Report ID: b43ec6b3-585c-4e70-96e3-721a4de98d63
  Faulting full name of the package:
  ID of the failed package-parent application:
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      1961
      Application
      COMPUTER DESK-8U0DERA
     
   
   
      Iexplore.exe
      11.0.10240.16412
      55b99d3f
      ntdll.dll
      10.0.10240.16430
      55c59f92
      C0000374
      00000000000ea28c
      AA0
      01d13131da821932
      C:\Program may Explorer\iexplore.exe
      C:\windows\SYSTEM32\ntdll.dll
      b43ec6b3-585c-4e70-96e3-721a4de98d63
     
     
     
     
   
  

  Hi @phlump,

  Welcome to the Forums of HP Support!

  I see that you are unable to print from Internet Explorer 11 to your HP LaserJet 1022n printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you are able to print from other applications. While this question would be better suited for Microsoft, I can make some suggestions. If these solutions do not help, please contact Microsoft.

  Reset Internet Explorer settings (backup your Favorites):

  You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

   

• HP laserjet 2605dn: printing from mobile phone from samsung s5

  I have an amazing dn 2605 that prints from all devices on a network except my fairly new samsung galaxy s5 wireless. The phone recognizes the printer and sends the image to it but the printer just print a solid black box instead of the image. Tried several different softwers impression of playstore but not those against hepatitis was able to resplve the issue. Contacted samsung support and they did everything as their possible but no results.
  Last ifea is perhaps another driver but which? Where to download from?
  I would be very grateful if someone could help me with this
  Thanks in advance for a quick response.

  I contacted HP support. Unfortunately, my pronter is too old and the phone is too recent. It is a problem of compatibility of clear material which cannot be filled on.

• Can print from a computer, not the other

  I have a HP LaserJet 1320 plugged into a router Airport Extreme wireless, which communicates with an iMac and a MacBook Pro, as well as four other Apple devices in the House.  Both computers are under Snow Leopard.  HP will print from the laptop, but frequently shows offline when I try to print from the iMac.  The signal strength is not a problem, because the router is four feet from the iMac.  The only cure I've found is to reboot the router.  This never gets old very quickly.  Any thoughts?

  Oh, sorry, my mistake.  Both, the printer will not have an iP address.

  Make sure you have the latest drivers for your printer: HP printer drivers for Mac OS X 10.6 and 10.7

• How can I print from macbook pro to p1005 wireless

  Hello

  I have a macbook pro and I want to print from the mac to the laserjet p1005 printer wireless

  and I use a router that has a usb port, I've come up with print screw the router, but it does not print

  the router is

  TG587nv2

  stop thomson

  Your router can't print via USB.  It only supports the USB hard drives.

  I found the answer in the Manual.

• having problems printing from the mobile application

  Hi, I do not know if I am posting this in the right place, I'm new to this site. I have a HP laserjet p1102w and everything is connected. I'm having a problem, I am trying to print coupons from my iphone... I was able to print twice at two different times, but now its not picking up my printer from the app, saying that "sorry, no compatible printer not found. Please ensure that your printer is turned on and connected to your local wifi network". Can someone tell me why is happening... its like pickes upward when he wants to... Thank you'd be really grateful feedback...

  Hi Carol1043,

  Welcome to the Forums of HP's Support.   I understand that when I try to print coupons from your iPhone your iPhone is not finding your Laserjet P1102w printer.

  To better help you, can you please give some more information:

  1. What app you try printing, HP ePrint, the HP AiO app app, or a 3rd party app?
  2. You try to print using AirPrint from the app? AirPrint require the iPhone to be connected to the same network as the printer wireless. I have included the Apple AirPrint: The Apple Mobile Device shows work is printing but the printer does not print the document in the case where the printer and the iPhone are on the same network.
  3. Other problems of wireless with the printer?  In the affirmative, please click on the operating system and follow the steps outlined in the document of the printer is not maintaining the wireless connection .
  4. What operating system are you using on your computer?

  Thank you.

• Printing from the touchpad

  My printer is connected via USB to a computer on the network. How can I make it work for print from the ThouchPad?

  Thank you

  Nathan

  There is a PC software open source (which I did not try again, still hoping 3.0.4 can solve

  the problem of my 'supported' LaserJet P2015 print nothing but black Uni

  pages) that can work for you.  Links software, instructions, etc., to:

  http://forums.precentral.NET/HP-touchpad-homebrew/299119-printing-any-printer-using-touchpad-solution.html

• HP LaserJet 4050: Error printing on HP Laserjet 4050 and 4100 Windows R2 2012

  We have recently migrated our Windows Server 2003 environment to Windows Server R2 2012.  Some of our printers, specifically HP Laserjet 4050 and 4100 no longer work with Server R2 2012, even if we downloaded the drivers for Windows R2 2012 from the Internet HP site and made sure the printer was using the new driver from HP.  When you try to print from the server or terminal connection, we get a "printing error" in the status field in the queue.  We do not know what to do to get these printers to print.  We have several of them and redirect users to print to another printer which is further so they can print.

  Do you have any suggestions?

  Best regards

  Paul

  If you cannot print from the server, then on the server, the parameters must be incorrect.  You can even ping the printers on the server?  Since you have more than 1 printer with this problem I doubt that all the printers hp all wrong.  Something else in the way that you configure these printers must be the issue.  If you can ping and also access the web server, then I think you have problems with active directory.  If you can not ping so perhaps have changed the ip addresses or the road you take these ip address has changed.

• Not printing from Windows XP

  I was feeling of success with my Windows XP computer for years on my HP 7360 inkjet. All updates and patches are up to date. Last successful impression was about 14:34 on June 22. The current number is any attempt to print from any application provides an error that there is no printer. There is no indication on the list of printers. Microsoft Fix It says spooler is not running and the fact (even if the Service Manager said it was running). Even after rebooting, I am unable to print or add a printer through the wizard, or via a separate program from the HP Installer. I would just remove the driver library and dll for any printer and try again, but do not know how to do this, and I don't know if this is necessary, or even desirable (or will solve the problem).

  The printer has been shared on the network home, but locally connected on the primary computer.

  Any ideas? And of course, I have a set of criticism of papers to get out today and this weekend.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If, after completing the stage has the print spooler is not always running after you launched the command "net start spooler", you won't be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  NOTE 2: HP printers have more than a number.  They could be DeskJets, LaserJet, OfficeJets, or something else.  If you actually have a HP Photosmart D7360 printer, download your driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-41958-2&lc=en&dlc=en&cc=us&os=228&product=1156651&sw_lang= if this isn't your model, you're on your own: Research from HP

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm