Print PS Points VS mm

Similar Questions

• How can I print the (points) mark attributed to objects (click on the boxes) as printed material?

  I tried with the storyboard and hadouts in the print options and he gave me wounds quiz in print, but not the scores on click boxes

  Hello

  Open the Advanced Interaction (F9) view. There is a little icon top right corner which allows you to print to this point of view.

  Lilybiri

• I have a gen apple 1 dot matrix printer and I need a driver software for it

  I have a matrix printer of gen 1 Apple and I want it to work with my windows computer but I can't type good driver software.

  does anyone know of a good driver for the printer matrix apple for windows?

  What type of port is has a 'printer by points Gen 1 Apple?  If it has a serial port Apple, you may have a secondary problem is that it connects to a typical Windows PC?

• HP Officejet Mobile Printe 100: Almost nine Officejet100 HP printer does not print black ink cartridge. No low or empty light show

  My 100 Officejet is less than 12 months old and has been rarely used. So far, it has printed perfectly. Now, it will printer color points, but don't print the black ink cartridge.

  There is no light showing on the Control Panel indicates that the cartridge is low or empy. Also, printing little that was made, it is impossible that he be empy so early.

  Someone at - it suggestions?

  Thank you very much.

  Hello and welcome to the community of HP @Pete226,

  I understand that you can not print black ink with your HP Officejet 100. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Mobile printers HP Officejet 100 (L411a and L411b) - solving print quality problems

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• HP Officejet pro 8100 cannot wifi access point?

  Yesterday, my HP Officejet pro 8100 arrived and I try to connect via wifi. I thought that it need access to infrastructure to print via wifi.

  When I turned on the printer I osserved that he create a stand-alone gateway with SSID: HP-Setup-7 a-Officejet Pro with IPv4 server address, etc...

  I was very happy and I printed a page with my smartphone samsung s4 directly connected printer access point (no wifi direct wifi except standard).

  Has been held today has changed, but I can't use printer with its own point of access, but only with an external wifi access point.

  Can someone help me, please? It could be a hardware problem?

  Thank you

  Luca

  P.S. to the webserver I checked 'connectivity point of access' (di accesso instradamento wireless in Italian Punto) is checked.

  Hello lucait

  You are right that the Hp Officejet PRo 8100 is a single function printer which does not directly optional wireless. You can always do what you want to do, but you will need a router to connect the printer to a network, and from there you can use the network routers or set up the feature ePrint for your portable devices.

  I hope this solves your post. Thanks again for the display on the HP Forums. It has been a pleasure. Have a great day!

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Mac 0SX installed the ink cartridge; aligned; printer does not print HP Deskjet 3520

  I just installed a new ink cartridge, lined up and tried to print my point.  The paper feeds through but nothing prints.  Is

  There is something else I need to do, or something that I did I shouldn't?  Have already installed cartridges spare and never had this problem.  Thank you.

  Hi NancyWB,

  I can't wait to hear that you have questions.  This could be a problem with the hardware cartridge or unit; However it can also be related to connectivity.  You are able to print a test page for the unit itself? Please see the procedure to print a test page for the device to determine if the material is shown below.  If the test page is empty or contains flaws, click here for the action on this issue.

  To print the page of unit test:

  1. On the product control panel, press the (arrow) down to select settings and pressOK .
  2. Press the (arrow) downward to select Tools and press OK .
  3. Press the (arrow) downward to select Print Quality Report and press OK . The report prints.

  I hope this helps!

• error in the printing of the documents right margin

  Put WiFi in place: Asus TF300T/Hp e-print ap/Hp Photosmart 5520

  The e - pad delivers a correct document on the screen. After you have started the e-print ap and chose the preview

  alternative to the right margin of document has been modified; all the words cut vertically. Print gives the same result of course.

  It seems as if the e-print access point converts the secular side out. PSE advise.// Scanmar

  Scanmar SALVATION,

  Thank you for the updated information.  I appreciate it.

  I had to use my Samsung tablet as my ASUS Tablet didn't Polaris office installed on it and it requires a product key to install it. When I shared the document with HP ePrint app I still need the size of A4 paper in the ePrint application.  You check the settings of the application as well as Polaris ePrint?

• DeskJet F4280 flashing Orange and "E" on the screen. refuses to print

  I have a HP DeskJet F4280 all-in-one printer.  It worked well for several years.  Today I went to print something and the printer did not respond at all.  I have printed many times before from this computer and it has always worked well.  There are several computers in my home using this printer, running under Windows 7 64-bit and Ubuntu Linux and all have historically worked well.

  On the control panel of the printer, there is a light under the ink level for the black cartridge blinking orange.  In addition, there are an 'E' in the display number (photo below).  Read the support forums, I managed to get it printed some kind of test page with these listed errors:

  • 1 pen in chute 1 is of unsupported type
  • 1 pen in chute 1 has put illegal region
  • 1 pen in chute 1 has bad locking bits

  I've attached a scan of this full page below.

  The ink cartridge is a genuine cartridge HP 60 XL.  The cartridge was filled once at a mall location "ink."  It works very well since being filled, until today.  I managed to print a page of a print job that I've put on hold and it looked very nice.  So there is definitely nothing wrong with the cartridge.

  I tried to replace the black cartridge with an old empty cartridge I had lying around the House.  This corrected the error reported on the control panel of the printer.  Since the cartridge is empty, when he tried to print something from that page came still Virgin, but at least the orange light stopped flashing.  When I put the problem cartridge in the printer started pointed out the error once again, with the amber light flashes and the "E" on the screen.

  How can I fix my printer to accept this black cartridge?  I don't want much out and blow $60 on a new cartridge when the one I have is quite good.

  Thanks in advance for any help.

  

  

  Hi denversc and natsemioldskul.

  The blinking light under the black ink indicator means it has not detected the ink cartridge. That means the cartridge is empty or gone bad. The 'E' error means that the printer detects something wrong with one of the cartridges.

  http://goo.GL/2lQQS

  In the case of denversc, as put in a black cartridge empty old deleted the 'E' error, the problem is with the cartridge. With the help of a charged cartridge may or may not have caused the problem. See the following link for more information on this topic:

  http://goo.GL/vJhvk

• Owners of printer inkjet all-in-one Dell 962 thread (W7)

  Please follow the instructions below and then tell me what happens.

  Make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  Unplug your printer.

  Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  All other drivers

  Vista 64-bit drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Rick,

  Thank you much for the help. I took your advice and installed the Vista SP2 drivers in compatibility mode, and when my laptop is connected to the printer via a USB cable, I can print.  Now, here's the best... Later, I decided to have the printer put in place for the wireless.

  I tried to add a Dell network port, and then pass.  Did not work.  I tried also to add another printer by pointing to a shared printer on an XP computer.  I noticed one thing, it is that when the Dell printer software installed and prompted me to plug the printer into my USB port, it appeared that Windows snuck into another driver.  I saw a message saying that the printer was ready before the Dell software were made.  I also noticed that when I tried to create a new Dell printer two print drivers were available.

  In any case, I followed your instructions to uninstall everything (ran program of uninstalling the Dell software, rebooted, ran the patch to clean, restarted), then ran the Dell program configuration of the software (in compatibility mode Vista x 64 SP 2) and chose an installation over the network instead of local installation. He saw the Dell printer on USB wireless adapter and installed fine.  Now, everything seems to work wireless.

  I guess my point of view for writing is to warn that when you plug the USB cable during installation of Dell, it seems that Windows 7 is going to sneak in another pilot.  I also advise to install over the network if you want to try to use it wireless, rather than starting with the local USB installation and hope to switch to a network port later.  Thanks again for your message.

• HP Photosmart premium C410A fainted faded print

  Printer was purchased in July as an HP upgrade offer to a wireless printer. I use sometimes use the C410A as a printer, but my main printer is a HP Photosmart D7560 h.

  I use printer with 2 computers apple using OS10.7.2 (Lion) and an Ipad using ios5.1

  Recently, I replaced the cartridges that were original with the C410A with new cartridges. I start to meet very thirsty sun prints. I called the Help Center and they told me to do a cleaning of printheads and the next print was pointed dark and good quality. A few days later, I tried to print, and again, it was so dark that I couldn't read faded amd. I repeated the printhead, clean-up operation and the print quality improved for the most part, but not where it had been before. The following characters was dark and faded at the point of being unusable.

  I buy a 3-year service contract.

  Question: Other owners have similar problems with the C410A printer?

  Other than to go out and buy all new cartridges and start over?

  Troubleshooting steps here can help solve the problem, expecially the event check the Solution 6, step 3.  If this does not resolve the issue, see the post here.

• matrix printer does not work with windows 7 64 bit, using usb adaptor.can I install a PCI to printer so it works?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  According to Okidata it should do, but you also tried the procedure described here Manual printer driver installation?  http://my.okidata.com/pp-ML184Turbo.nsf?OpenDatabase

  

  Also check that your USB adapter is installed (Device Manager) and the computer can set the optimal settings for the port LPT adapter (properties).

• Print double-sided PDF files

  Using a B210a Photosmart of most HP - how to print PDF files duplex.  I can print Word etc documents this way but do not seem to have the option when you open a PDF file.

  Hello

  You could experience a page or two first.

  1. Choose file > print.

  2. in the pop-up menu of subset in the extended area, select Pages only.

  3. click OK or print.

  4. If the total number of pages is odd, add a blank page so the last odd page has a worksheet to print on.

  5. replace the stack of printed paper into the paper tray (source) so that the sides not printed print. Point the top of the pages to the printer. Make sure that the edges of the paper stack are square.

  6. Choose file > print and select odd Pages only in the subset menu.

  7. Select Invert Pages. In this scenario, the option reverse pages ensures that the page sequence is correct.

  8 click OK or print.

• You are prompted, for the default program when you try to print several pdf files.

  I'm on server 2008R2, and whenever I try to pick more than one PDF file, then print, it will prompt you to choose me what program I want to open PDF with.

  

  It does not allow me to print several pdf files no matter where the files are stored (office etc., network). I'm prompted with the message "choose program...". "every time.

  I checked my preferences, and "Enable protected mode" is not selected

  

  I already tried the following:

  Adobe Reader DC relocation

  Running updates

  Change the value in the registry to point to "AcroRdr32.exe".

  Thanks in advance for your suggestions.

  
  Eric

  Thank you all.
  I was able to solve it.

  In the registry, the .pdf is looking at Acrobat.Document.15

  

  Looked at the reg path and saw that the "Print" was pointing to Acrobat acrord32.exe rather

  Changed to point to the drive path.

  

  This fixed the problem.

• Smart Web Print menu drop-down

  I recently installed a new AIO.  The HP Officejet 6500 E709n series. I was using IE6 in time. After I installed successfullyy software, HP SMART WEB PRINTING worked fine. I then installed IE7 and although the HP SMART SELECT button on my command bar, it does so WITHOUT the menu drop down. I can only clip & print 1 point at a time. All other options are missing, since there is no drop-down list. Help?

  It's to do with other toolbars - I read on another forum - and it worked for me - I got rid of the yahoo toolbar - which I never use anyway - via the Control Panel - Add or remove programs - then close IE 7 and restart and voila - there is the drop down arrow and now I have the options of Clipboard and it works a treat.