Print table with decimal places in text file

Similar Questions

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• Individual unique watermark printing a document for many users in accordance with the list in text file

  Mr President.

  I have a unique requirement. I have proposed something and I put a single PDF file in this folder. I also have a text file with the name and number of the user. I want to make a script that will read the name in the list and print a copy of the PDF document with the name and the number one watermark diagonally on each page. Then the second name is included in the list and printed. All the names on the list should be printed with the unique name & number a watermark on each page.

  Can help me please, in the script.

  First of all, you have posted in the forum of reader. You have the drive or the complete Acrobat? You can not do with precedent, only the last (and then even in special circumstances).

  What you're asking for is possible to achieve (in Acrobat), but it requires a script to measure. You cannot expect the people here to write this script for you. We will be happy to help you with any specific questions you may have, but if you want someone to create the whole thing for you, you will probably need to hire to do it. I have developed several similar tools in the past (for example: Scripts Adobe custom: Acrobat - file PDF Batch Watermark A ), so I'm happy to create this script for you, for a fee.

  You can contact me to discuss it further, if you wish.

• High Score Table: writing a Simple with Flash and PHP text file

  I'm having a problem getting Flash to work with PHP that I need Flash to read and write to a text file on a server to store data simple name partition for a games Hi score table. I can read the text file in Flash fairly easily, but I also have to write to the file when a new high score is reached, so I need to use PHP to do that. Can I send data from flash to php by POST file, but so far it does not. The PHP file is confirmed that the work that I added an echo in the file that displays a message to verify that the server is running PHP - files were also uploaded to a remote server so I could test them correctly. Flash code is as follows:

  FileWriter php

  var myLV = new LoadVars();

  sendData() {} function

  //sets variable 'hsdata' to send to php

  myLV.hsdata = myText;

  myLV.send ("hiscores.php");

  }

  I believe that it sends the variable "myText" in the php file in a variable called 'hsdata' I want the php file to write to a text file. The mytext variable is just a long chain that has all of the partitions and the names in the scores. OK, XML would be best way to do it, but for the speed, I want to just get the basic features of work, so store a shot of simple text is sufficient for now. The PHP code that reads the Flash variable "hsdata" and wrote for the "scores.txt" text file is due to:

  <? PHP

  sets the variable to the data posted from flash

  $flashdata = $_POST ['hsdata'];

  File Manager opens the file and clears all content with arg w

  $fh = fopen ("scores.txt", "w");

  Adds data to the file

  fwrite ($fh, $flashdata);

  closes the file

  fclose ($fh);

  echo "php file works;

  ? >

  Any help with this would be greatly appreciated - once I get php to write text files simple I should be ok. Thank you.

  var outLV = new LoadVars();

  var inLV = new LoadVars();

  sendData() {} function

  outLV.hsdata = 'Hello from Flash';

  outLV.sendAndLoad ("http://www.mysite.com/hiscores/test23.php", inLV,"POST");

  }

  inLV.onLoad = {function (success)}

  If (success) {}

  sets the dynamic text box to show the variable sent by php

  statusTxt.text = this.phpmess;

  } else {}

  statusTxt.text = 'No Data Received';

  }

  };

  It works well and function of inLV.onLoad of the reports it receives data, but does not display the variable received from PHP. The PHP file is like this:

  <>

  $mytxt = $_POST ['hsdata'];

  $myfile = "test23.txt";

  $fh = fopen ($myfile, 'w');

  Adds data to the file

  fwrite ($fh, $mytxt);

  closes the file

  fclose ($fh);

  $mess = "Hello there php ';

  echo "phpmess =". "." $mess;

  ?>

• write the table in its entirety in text file after completing the data collection

  Dell NetBook, Windows XP home, OR-6008, Labview 8.5.1

  I read a psydo real-time app 8 analog signals at 100 Hz.  I can't write directly to a file of data during data collection (processor flash drive to slow down), but can store 4 2D tables separated, with one added timestamp data.  Once I finished collecting data, I would record each table in a separate text (csv) file.  Using takes a loop for in long and using the 'picture to a worksheet string' add labels that I can't change.  I'm climbing down a text file of 3 columns and lines equal the number of samples, I've collected (e.g., a 1 minute session would be 6000 rows and 3 columns).

  1,1.3,1.5,

  2,1.2,1.4,

  3,1.4,1.1,

  4,1.5,1.2,

  5,1.4,1.4,

  etc.

  Thank you

  Troy

  
  

• Problem with the creation of text file 9530 unit

  Hello

  I created the text file in the memory of the device "file:///store/home/user/sample/mytext.txt" with a text using my application. He created the file with the extension "mytext.txt.rem". While I couldn't able to read the same file.

  I tested the same application with 8520 and its works very well... It creates the file "mytext.txt" only.

  I don't know why the name of the text file adds extension ".rem" in 9530.

  Could you please help me to findout the solution?

  Thank you

  SmartPhoneDev

  You have enabled encryption.  Have a look here:

  http://supportforums.BlackBerry.com/T5/Java-development/why-my-text-written-to-a-file-on-the-SD-card...

• table Oracle in a delimited text file

  Hi all

  How you export data from an oracle table to a delimited text file?, I think the answer should be used the exp tool and specify the delimiter in the control file. Please correct me of you to be sick. Thank you

  
  

  Search for:

  UTL_FILE

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:0:no:P11_QUESTION_ID:88212348059

  See you soon,.

  Manik.

• Need help on query with decimal places and trailing 0

  Community of Oracle I need help in the following situations:
  
  I received the following query:
  SELECT (SUM ("VALUE1") COUNT ("VALUE2"))
  FROM sometable;
  
  This returns the following results:
  200
  222,5
  
  I want to display as 222.50 222,5 value so I tried ROUND(value,2) but then came to the conclusion that the tour will not show drags me 0.
  So now I tried to_char(value,'9999DD00') and of course he's back 200.00 both 222.50.
  
  Now how to make it conditional so when a number has no decimal place it shows the whole number and when it has a decimal, it shows it in the format to_char(value,'9999DD00')?
  
  I hope I have made my situation and question correctly and I hope a solution.
  
  P. S.
  I need to appear like that since it is an average of the prices of the products
  
  Published by: Jnijman on July 3, 2010 13:06

  You can use CASES and INSTR:

  SQL> with t as ( -- generating sample data:
    2  select 200 col from dual union
    3  select 222.5 from dual
    4  )
    5  --
    6  -- actual query:
    7  --
    8  select col
    9  ,      case
   10           when instr(col, ',') > 0
   11           then to_char(col, '999d00')
   12           else to_char(col, '999' )
   13         end formatted_col
   14  from   t;
  
         COL FORMATT
  ---------- -------
         200  200
       222,5  222,50
  

• Tables with decimal tabs

  I want to use the decimal tab in my paintings, but they will line up not using optical kerning. I want to use optical because there is a better fit with my fonts but I am for now am stuck using measures. On this system (from the client), I'm also stuck with CS3 OSX. Any thoughts?

  I agree. Looks like the decimal tab can not see inside text variables to find the decimal object. This looks like a logical feature upgrade if you want to submit to Adobe - the behavior you're seeing is certainly not a behavior that anyone would want to. Probably, it is quite rare and does not appear in product testing.

  In the meantime, I think you have two ways to go.

  One would be to simply line up the columns to the right and use the metric kerning instead of optics on the cells in a table. Create a paragraph style and apply it to each column.

  The other would be to find a way to convert the numbers 'live text, "assuming that the document has no need to keep them in the variable format (for future automatic updates, for example). Then they line up on the decimal point. This could be done using a script (which can do all at the same time, but requires knowledge of scripting), or you can assign yourself a keyboard shortcut for "find the next thing in the dialog box search GREP" (like GREP can find variable), and another for "convert variable to the text", then spend a quiet minutes by alternately pressing the keys.

  There may be an easier solution, but I can't think of one right now.

• Place a text file marked in a bound text block

  If the block of text is not linked to another block of text place() method works very well. If there are related executives, I can't place() file in the first frame of the thread. I failed to determine why. I pored on Index of / for a clue. What Miss me? Thank you

  Persistence is the key. I found this post: CS, CS2 & CS3 place problem which totally helped me. I need content = "before place().

• Problems with export/save the text file in Indesign

  Hi scripters,.

  I have a problem that I don't know how to solve.

  InDesign CS3, Mac and PC - seen as the problem on some Macs, not all, but some still have / get this error.

  I made a script that collects the text of some managers of related texts:

  for (var i = 0; i < myMainList.length; i ++) {}

  var curTF = myMainList [i];

  while (curTF! = null) {}

  myExportString += curTF.contents;

  curTF = curTF.nextTextFrame;

  }

  myExportString += "\n\n###\n\n";

  }

  alert (myExportString);

  It collects the text and also it will display ok in the dialog box.

  However on some computers (Mac) the following will only produce a byte zero of the file (when there are several textframe in the above loop, a zero-byte file is still produced - but again, it is only on some Mac) If a single textFrame with only a small portion of the text is saved/exported it works:

  var Folder.myDocuments.path = myFolder + "/ Desktop/export";

  //alert ("Myfolder:"+ MyFolder ");

  {if(!myFolder.exists)}

  Folder (myFolder) .create ();

  }

  var myFileName = myFolder + "/" + win. FilePnl.FileGrp.FileName.text + ".txt";

  var myFile = new file (myFileName);

  myFile.encoding = 'text ';

  myFile.open ('w');

  myFile.write (myExportText.replace("/\u2011/g",'-')); Replace (/ [^ a-zA-Z 0-9] + / g, "));

  myFile.close ();

  It has to do with using .silence?

  I hope someone can help me with this summer working on this problem for means of time now.

  Thomas

  Somehow myExportString became myExportText.

  In addition, what happens if you replace the text before write you it

  to deposit?

  Another thing you could try is to cast it to a string as follows:

  String (myExportText)

  Also, maybe try to change the encoding "UTF-8".

  Substances

• retrieve the information of partition table with lack of offline data file

  I just restored a backup of a database. When I unzipped data files, I discovered that a single data file was so damaged in the starting order of the database, I had to put the offline data file. The tablespace which reports the data file holds the information of partition of a table. Since I have no archives from when the data file has been created, I know it is not possible to recover the data file, I have to recover as many lines as possible other files in the tablespace data but when export or create the table as what to choose in the affected partition get ORA-00376 : cannot read file 1624 at the moment.
  
  is there a way to tell oracle to ignore the data offline file and export the remaining data file information?
  
  Just to clarify my situation a little more;
  iI have a table called PPGA_ACTABOPRE that is partitioned by HASH and has 20 partitions, each partition in a different tablespace and tablespace each have about 8 files of data. A data file in the partition 9 is missing and I want is to get the information from the files of the remaining data, but whenever I issue a select statement or an exp or anything I get ORA-00376.
  
  I try to set the flag to ignore blocks corrupt with run DBMS_REPAIR. SKIP_CORRUPT_BLOCKS ('PPGA', 'PPGA_ACTABOPRE'); and then select the info but it did not work.
  
  Any suggestion would be appreciated;
  Thanks in advance

  For the actabopre_p08 partition, some files are available, and we're not. You can access data at the segment level, because some extensions are missing.

  You would need to access the data by rowid. You could loop through dba_extents and use dbms_rowid.create to generate a list of ROWID that may exist in the available data files.

  This may help: -.

  http://kerryosborne.Oracle-guy.com/2009/02/saving-rows-from-corrupt-blocks/
  http://kerryosborne.Oracle-guy.com/scripts/save_u.SQL

  Published by: Robert Geier on March 12, 2010 15:33

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say

• Problem with end of line in the text file.

  Using LabVIEW 2010 on W7 64 bit in the USA.

  I have an application in which I write in a text file.  I use the function "Write to a text file" to write the text and "Reading a text file" function to read again.  My problem is with the end of line character.  The text that I write is a long chain, not an array of strings.  While building this chain, I insert the constant EOL of the palette of channels function to indicate that a new line is planned.  My tests showed this EOL constant values of consecutive bytes 13 and 10.  After writing all the text in a file, I can open the file with Notepad, or Word, or something else, and it is displayed correctly.  When I read he returned with the function of text file reading, I'm trying to parse the string by searching for the same constant EOL, but it does not work.  A closer examination of the extracted string from the file reveals that the value of end of LIFE has changed for only 10.  The location of the byte to 13 disappeared.  I know there is a note on the writing of the function of text file add/change the EOL characters, which are the default values of the system, but the note specific tables.  I manually put the value in the string.  Does anyone know why this happens and how to fix it?

  Thank you.

  The help of reading from text file function

  The function converts all characters in end of line break characters online platform, dependent unless you right-click the function and remove the check mark next to the menu item Convert EOL .

  Right-click your reading and uncheck the EOL conversion.  I recommend to do the same thing to your writing to text file feature.

• Reading a text file and store it in a table, guard return 0.

  Hello, I have an application where I need to read the speed and rate of a text file. For this application, I use a myRIO NEITHER and I want to save the text file on the drive the myRIO aboard in the tmp folder. I simplified my request to isolate the possible problem and I will attach a sample text file and my VI is used.

  Overview:

  I use a myRIO project because in my real application I myRIO VI of PWM and encoder. I noticed that my problem goes away when just open the main VI and run the application in LabView. My problem then that chairs the VI on a project myRIO folder.

  To address the issue:

  My question is, when running the VI of the hand of a project myRIO folder everything works as it is supposed to, but when you open the text file in my Subvi, it returns 0, as if nothing is in the text file. Now if I open the VI outside myRIO se project file it works just assumed that when X = 1, it opens the text file written data in a table and then close the text file. I can't understand why he reads nothing in the text file executing the main VI of a project of myRIO and when I use run to highlight one can see it opens the text file and then returns nothing. The text "test" file must be placed in the tmp folder on board the myRIO to validate my way.

  Is there a way to fix this?

  I assume because I use a myRIO project I can't access the file text, or because of how LabView?

  Any help is appreciated, thanks in advance!

  You don't have your son wired error upward.  You're files showing error functions?

  What context are you running VI when you are within the project and what context from outside the project?

  My suspicion is that in one case, you run on your PC, the other on the cRIO.  Your file exists only on one device or the other.  And also that when you change your PC for the cRIO, your file path must change.  It's very strange that your watch VI access you the disk R:\.  I bet that the R:\ car n does not exist on your cRIO.