table Oracle in a delimited text file

Similar Questions

• Print table with decimal places in text file

  Hello

  I tried to find this information on the forums, but I can't seem to find exactly what I'm looking for. I VI that when it's finished has a 2 column and row table 5 or more which is filled with thermal loads and corresponding tensions. I want to print this table to a text file, but I want to understand decimals in at least the tension. I've attached what I have, thanks in advance

  The answer is on your pc. If you have the open Help context, click the detailed help. There is a link here on the format specifiers. You use %d which tells the function to convert whole numbers. You want %f for floating point numbers.

• write the table in its entirety in text file after completing the data collection

  Dell NetBook, Windows XP home, OR-6008, Labview 8.5.1

  I read a psydo real-time app 8 analog signals at 100 Hz.  I can't write directly to a file of data during data collection (processor flash drive to slow down), but can store 4 2D tables separated, with one added timestamp data.  Once I finished collecting data, I would record each table in a separate text (csv) file.  Using takes a loop for in long and using the 'picture to a worksheet string' add labels that I can't change.  I'm climbing down a text file of 3 columns and lines equal the number of samples, I've collected (e.g., a 1 minute session would be 6000 rows and 3 columns).

  1,1.3,1.5,

  2,1.2,1.4,

  3,1.4,1.1,

  4,1.5,1.2,

  5,1.4,1.4,

  etc.

  Thank you

  Troy

  
  

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say

• Reading a text file and store it in a table, guard return 0.

  Hello, I have an application where I need to read the speed and rate of a text file. For this application, I use a myRIO NEITHER and I want to save the text file on the drive the myRIO aboard in the tmp folder. I simplified my request to isolate the possible problem and I will attach a sample text file and my VI is used.

  Overview:

  I use a myRIO project because in my real application I myRIO VI of PWM and encoder. I noticed that my problem goes away when just open the main VI and run the application in LabView. My problem then that chairs the VI on a project myRIO folder.

  To address the issue:

  My question is, when running the VI of the hand of a project myRIO folder everything works as it is supposed to, but when you open the text file in my Subvi, it returns 0, as if nothing is in the text file. Now if I open the VI outside myRIO se project file it works just assumed that when X = 1, it opens the text file written data in a table and then close the text file. I can't understand why he reads nothing in the text file executing the main VI of a project of myRIO and when I use run to highlight one can see it opens the text file and then returns nothing. The text "test" file must be placed in the tmp folder on board the myRIO to validate my way.

  Is there a way to fix this?

  I assume because I use a myRIO project I can't access the file text, or because of how LabView?

  Any help is appreciated, thanks in advance!

  You don't have your son wired error upward.  You're files showing error functions?

  What context are you running VI when you are within the project and what context from outside the project?

  My suspicion is that in one case, you run on your PC, the other on the cRIO.  Your file exists only on one device or the other.  And also that when you change your PC for the cRIO, your file path must change.  It's very strange that your watch VI access you the disk R:\.  I bet that the R:\ car n does not exist on your cRIO.

• the data from the tables of production in Oracle in pipe delimited flat f

  Hello
  Please someone tel me the query how to extract data in oracle in pipe delimited flat files using plsql stored procedure as updates.plz incremental tel me its urgent

  How to extract data in oracle in pipe delimited flat files plsql stored procedure

  You can try utl_file.

  and also do incremental updates.

  This part, I do not understand. Updates of what? The above file?

  Please tel me its urgent

  Who cares.

• Writing data in the text file or excel spreadsheet

  Hello

  I have a silly question to ask questions about the writing of data in a text file or a spreadsheet. I have an example that simulates a sine-swept DAQmx. The output it provides is the (amplitude and phase) frequency response function that is plotted on a graph (see VI) attached. I like to use these data for further analysis by transmitting the data to a text file or a spreadsheet. I've tried a few things, but the thread is broken. I guess I use the sink badly - so I was wondering, can you please advise me on what sink should I use?

  Your help would be very appreciated,

  Thank you very much

  REDA

  The wire is broken, because you cannot connect this type of data to one of these two functions. The data source type is a table 1 d of the clusters, where each cluster contains two tables. The text file write accepts strings, not clusters. Writing on a file action accepts dynamic data, and while you can convert dynamic data tables, there is no built-in mechanism to convert a table 1 d of the clusters of two matrices.

  What you need to do is to convert the data in a format which can be accepted by these functions. Since you want to have a "spreadsheet" file then you should use writing to the spreadsheet file that creates a delimited text file. Since the frequency data would be the same for the plot of the magnitude and phase diagrams, you can have 3 columns: frequency, amplitude, and phase. You can take off the items using Unbundle by name, and then create a table 2D of each element of the cluster. The real question is to know if you want to save the data at each iteration and if you simply add on the file. The attached figure shows write an initial header and then adding just streaming the data.

• {Hurry!} Add to a text file

  Hi guys!

  I am new to the program and am trying to learn how to use it. Here's my problem,

  I did a temperature sensor and got data nor my DAQ, but I don't know how to add the date system time and the average temperature in a tab delimited text file. I got some advice saying that

  "By connecting the refnum of a shift instead of the refnum and blocks register, the loop will be continually data for each iteration of the loop, by reusing the name specified in the first iteration. The string value would be the range of string that should be inserted at the end of the file. If you want to really be a line (and do you) you need to be sure to have a line break / carriage return as the last character of the string. »

  that I really don't understand. Could someone give me a hand?

  Thank you very much!

  Rookie

  I knew that was coming next... This will put a timestamp and the temperature in the columns for each reading on a separate line

  

• Control of the authorization of sharing when writing to a text file

  I have several application that writes a file of text defined in a file share.  Another application, not a LabVIEW application then reads the delimited text file.  When my application is creating or writing to the file text delimited, is there a way to manipulate the permissions so that no other application can read the file at the same time, I am writing to you in the file?  I can do this in Visual Basic through the FileShare (http://msdn.microsoft.com/en-us/library/system.io.fileshare(v=vs.110).aspx) option during the creation of filestream, but I don't see this option in LabVIEW.  Thank you.

  Too bad.  I believe that this is possible thanks to the function of "deny access".

• Odd number of columns in the text file

  Hello everyone

  From an Excel (.xls) file, I saved (tabs-delimited text) file and open in Labview. The file has only 2 columns (apparently), but my VI says he has 12! I tried to find any character 'lost' in the file but it's all in the first two columns.

  However, if I open the .xls file, save the text file delimited tab, open this tab delimited text file using excel, hit save and then open in my VI, the VI will tell me that the file has only 2 columns. Strange.

  Enclosed please find my VI (I tried two different methods to load the file and got the same results).

  Thank you

  Dan07

  

  

  Around this line, you will notice a bunch of tabs:

  240.4926373\t507.1851226\t\t\t\t...

  Edit: I would like to clean up the source, but if you're stuck here is a way to clean:

  

• Use the lines of a text file as input to an SQL command

  Hello

  I have a text file containing the lines...

  123

  1234

  I would like to use as input for a SQL command running in a script. ie

  Update flag set < table > = 'Y' where job = < the text file lines >;

  Any help much appreciated.

  See you soon

  External table will do.

  For reference...

  CREATE TABLE Hold'em (SEQ_NUM NUMBER (10));

  insertion in hold select SEQ_NUM in task where proc like '% PROC;

  update set hold_flag = task ' ' where in SEQ_NUM (select hold SEQ_NUM);

• Import data from the text file to open the Document

  This should seem simple, but I can't find a way to import a text file delimited to tab automatically on opening the document.  I can open my form fill pdf document, select Forms > more form Options > data management > Import Data > change the bottom right "Text (*.txt) files" file type, select the file, then import with no problems.  I can't find a way to do this automatically when the document opens.  I know a *.fdf file will do, but my data are in a tab delimited text file.  If this is not possible, is there a program or a script that will convert *.txt to import *.fdf?  Thanks for your time.  Steve

  Have you looked at using custom JavaScript?

  importTextData

  You will need to work on how the data file select the line form.

• Syntax to detect the line feed or newline read text file?

  I have a SQR (aka Hyperion Production Reporting) program that treats a comma-delimited text file.
  
  Sometimes one of the fields contains carriage returns and line breaks, that's not groovy, as is the record delimiter.
  The program currently handles this situation by disgarding records that do not contain the specified number of fields.
  
  I would like to scan the file before treatment, pickling, transport and line breaks, returns when they are integrated in a record.
  I have problems with the syntax required to recognize these characters, however.
  
  The program reads the file in a string (for example read 1 $record_buffer: #len).
  then it executes a while loop that examines the $record_buffer string one character at a time.
  
  I tried a direct comparison: If $char = Chr (10) or $char = Chr (13)
  I tried to assign a chr() value to a variable before the comparison: Let $LF = chr (1)... If $char = $LF
  I tried using code before the comparison: encode '< 10 >' in $LF... If $char = $LF...
  
  Could someone help me with this?
  
  Thank you!
  Laura

  Here's the syntax that works:

  #ifdef EBCDIC
  encode "<13><37>" in $hr
  #else
  encode "<13><10>" in $hr
  #end - if

  (replace the return with the null character)

  LET $descrlong = translate (& descrlong Chr (13), ")

  OR try the following code:

  !**********************

  ! Retrieve a line *.

  !**********************

  ! This local function / procedure will look for tank 13 which is a line terminator. The position where is returned

  ! to the routine.

  ! Parameters: $strToRead = this string that contains the formula is parsed to find the tank 13 (end of line) identifier

  ! : #startPos = the position where we need to find the identifier EOL

  ! : #PositionFound - this by the reference variable returns the position where the EOL.

  !

  BEGIN-process Get-Line($strToRead,#startPos,:#PositionFound)

  Let #PositionFound = instr ($strToRead, chr (13), #startPos)

  Proceedings

• to insert two text file into an oracle table

  Hi all
  
  I am new to oracle technology. I want to insert data into the table using two text files...
  
  
  FOR EXAMPLE:
  Text1.txt contains employe_id, Employee_name, address
  
  Text2.txt contains department_id and department_name
  
  I want to insert data in the table employee having column employee_id, employee_name, department_name, department_id and address...
  
  
  Using the unique control file I want to solve say... I Googled it, but I can't have any idea...

  Hi, we use the concept of external Tables...

  First table with Text1 file using...

  (Text1) CREATE TABLE
  number of employe_id, employee_name VARCHAR2 (50)
  )
  (EXTERNAL) ORGANIZATION
  TYPE ORACLE_LOADER
  THE DEFAULT DIRECTORY HFO_CONS_INPUT<-- directory="">
  (SETTINGS) ACCESS
  RECORDS DELIMITED BY NEWLINE
  FIELDS TERMINATED BY ', '.
  MISSING FIELD VALUES ARE NULL
  (
  employee_id char(10),
  Employee_Name CHAR (50))
  )
  LOCATION ('text1.txt')
  )
  5 PARALLEL
  REJECT LIMIT UNLIMITED;

  2 text file:

  (Text2) CREATE TABLE
  department_id number, department_name VARCHAR2 (50)
  )
  (EXTERNAL) ORGANIZATION
  TYPE ORACLE_LOADER
  THE DEFAULT DIRECTORY HFO_CONS_INPUT
  (SETTINGS) ACCESS
  RECORDS DELIMITED BY NEWLINE
  FIELDS TERMINATED BY ', '.
  MISSING FIELD VALUES ARE NULL
  (
  department_id char(10),
  department_name CHAR (50)
  )
  )
  LOCATION ("text2.txt")
  )
  5 PARALLEL
  REJECT LIMIT UNLIMITED;

  Then,

  Select * from text1, text2;

  EMPLOYEE_ID EMPLOYEE_NAME ADDRESS DEPARTMENT_ID DEPARTMENT_NAME

  1212 Maduravoyal ka 892390 computers

  Thank you
  Shankar

• Unload tables to text file with delimiter;

  I want to empty all table data in a text file with. as a delimiter without applying a | ; || between the fields. Is there a ' select * from myTable ' method;
  
  And this applies to other tables.
  
  Want to run a script every day to ftp to other sources or keep them as backup.
  
  Thanks for your help.

  You must call the sqlplus from a shell script. Think you're in a windows environment. So you can have something like this

  create a run.bat file or command called run.cmd batch file and place the following code in there and save it

  This command file will create a new file called run.sql in the c:\ drive which will be managed by sqlplus.
  DateTime variable will create value "mmddyyyyhh24miss" (depending on your settings for date format) and be preceded by ".txt".

  set mydatetime=%date:~0,2%%date:~3,2%%date:~6,4%%time:~0,2%%time:~3,2%%time:~6,2%
  echo set linesize 124 > c:\run.sql
  echo set colsep ';' >> c:\run.sql
  echo set pages 0 >> c:\run.sql
  echo set head off >> c:\run.sql
  echo set verify off >> c:\run.sql
  echo set echo off >> c:\run.sql
  echo set trimspool on >> c:\run.sql
  echo set feedback off >> c:\run.sql
  echo spool c:\%mydatetime%.txt >> c:\run.sql
  echo select * from tab ; >> c:\run.sql
  echo spool off >> c:\run.sql
  echo exit >> c:\run.sql
  sqlplus -s user/passw0rd@connect @c:\run.sql
  

  Note: You can add all the environment variables with a single instruction set in sqlplus Parry set linesize 124, etc.
  But I have separated them for readability

  Just run from the command prompt
  c: > run.cmd

  See your updated file pending with current datetime.txt and go to the c:\ drive