Print the document margins

Similar Questions

• PSC 2510 double prints the left margin - transport stops

  Hi, my 2510 double print the left margin so as to look as if the letters are ghosts, now it started to leave a wide width of letters about an inch from the left margin. At the same time, he will start a print job only to have the transport stop about 1/4 of the way, I have manually position the carriage to the position of Park - the menu says so is printing - it is not. I unplug the AC for 10 seconds and when I reconnect the printer resets and continues its merry way, until at the latest.  Thank you Kent

  You probably have a buildup of ink on the MICR band used by the printer to tell where is the transport.  Gently clean the Strip as shown here.  Don't forget to respect the warnings, if you do not you may damage the delicate MICR band.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• When you try to print the document his service hence giving error does not

  I am using windows xp pro sp2

  When you try to print the document his service hence giving error does not

  then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

  Please help me

  Hi kalpesh_vaghela,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. What is the number and model of the printer?
  4. You use any program to print the document?
  5. Are you experiencing a similar problem with any program that allows you to print?
  6. You have security software installed on the computer?

  Method 1

  See the link below and try the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

• HP Officejet 4630: 4630 Officejet prints the document

  HP Officejet 4630 prints the document.  An error message appears, but there is no error #.  I ran printing HP and doctor scan and it says that the printer works fine.

  Hello @LindaSS!

  Thanks for posting on Forums HP thr!

  I see you found a mistake on your Officejet 4630 when you try to print complete documents.  The error on the printer or on the computer or both.

  Is the printer that is capable of performing a photocopy.  I suggest to try a copy of photo on the printer to make sure that the hardware is OK.  If the printer is able to copy, then you're probably looking at a software related issue.

  If copying success so the first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup

  To download the HP software, click here: HP full feature software and driver

  If please, after back and let me know how it goes!

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• 8600 premium print and then gives the error message that it cannot print the document that it just printed.

  It isn't really a problem, just a nuisance.

  Last week I printed several documents from PDF files and print documents.  Once printing has been completed, an error message would be displayed on my laptop that the printer cannot print the document.  I've ignored the warnings and continued, and then the printer would print the document again.  I found that if I clicked on the error message, printing in double stop.

  Since then, whenever I don't print from any program (MS Office, Firefox, Chrome, IE, etc), I still get the same message if the end of the print document.

  Just a nuisance, but if I forgot to point out the error, the doc print again without error message after the second printiing...

  I noticed that the queue, regardless of the size of the document, always freezes on the last page to print before closing.

  I turned and turn it back on and reset the connection to a static IP address for the printer wireless...

  Hello DRS1966,

  Yes, I can understand the frustration of getting an error once printed of your document. I'm glad that's not interfering with your documents but would like to try and get rid of it. Please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it detects errors, or that it cures the problem. I'll watch for your reply.

  Thank you

• Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Hi Michael,

  Please follow the link and see the issue:

  Cannot print or preview before printing a Web page in Internet Explorer: http://support.Microsoft.com/kb/973479

  If the problem is specific to MS Word, then I suggest you to post the same question in the forums of MS Office for assistance.

  Microsoft Office Forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Word

  I hope this helps.

• Stroke shows when I print the document

  I wrapped text around a stroke, but when I print the document, the race appears as a black line.  I put the weight of the race to zero, but it does not help.  Am I missing something?

  Thank you...

  Could be configured on the text to 0, not the way that the text is on the run. Don't forget when you are looking for in the Toolbox Panel or swatches with text object selected that the small square is active, not the "T" which tells you is styleing text.

  Also, make sure that you set the color of the outline on [none] for good measure.

• E studio 282 sets on top of the document margins

  Hello

  For 3 days I try pring a PDF document no whole a4 page. The problem is that the printer always sets margins on the top of the document - move down by the value of the margin.

  In this way the spirit of the document size A4 starts printing of about 0, 5cm of tol with the course as it gets on the bottom (outside of a sheet of paper).
  I tried the dacument even on other printers and it prints fine.

  Another thing I tried was setting (in e-studio) the top and bottom margins when printing.
  It simply causes high-low 'cut' of the document fragment.

  I also tried to tinker with settings e-studio282 and the
  "Print properties > finishing > use... custom margins. »

  Not allow me to set a value less than 0.5 cm.

  Is it possible to solve my problem?

  Hi StishMa

  I doubt that anyone here would be able to provide a solution to your problem of printing, because in this forum, that you will find Toshiba enthusiasts who share the experience especially on laptops, like hard drives and media (television sets) consumer products.

  But I recommend you to check the page of user manual 236 defining the area printing options:
  http://www.Eid.Toshiba.com.au/customers/c_es281c/manuals/PDF/printing%20Guide.PDF

• Photosmart 7150: Printer prints correct colors of the web; printing of background colors incorrect when you print the document

  I have a Dell desktop computer, using Windows 7 with a HP Photosmart 7150 (I know this is an older model, but I have no reason to spend).

  When you print to the web, the colors are printed similar to what we see on the screen.  When I try to print a document that includes a background with color, the color prints differently.   The document I'm working on that requires a background textured printing on glossy photo paper.  When the document is formatted with a brownish background, the background is printed bright green.  When the document is formatted with a blue background lighting, the background is printed a bright torquoise.

  I worked with the printer settings changing the quick project to the best print quality. increases the magenta color, but nothing seems to work.  The ink cartridge is fairly recent. I hate wasting more paper and ink.

  Any suggestions? Thank you!

  Thank you for taking the time to try to help solve the problem of color with my printer.  I solved the problem: I had a PHOTO, #58 print cartridge in the printer.  When I changed for the black cartridge, #56, colors came out as it should.

  Thanks again!

• cannot print the document from Windows Mail, get a script error

  When I try to print an electronic document of Windows Mail, I get the following error message:

  -An error has occurred in the script on this page

  -Line: 2115

  -Char: 1

  -Error: unexpected call to method or property access

  -Code: 0

  -url://ieframe.dll/preview.js

  Hello

  1. are you able to print other documents?

  2 have had any changes made to your computer before this problem?

  Try the reinstatement of OLE controls to correct the above error.

  Method 1: register the OLE control
  To do:
  1. click Start and type regsvr32 ole32.dll in the search field.
  2. press enter.

  Check if this helps you to print from Windows Live Mail. This usually solves the problem. If you are still having the same problem, follow the remaining steps.

  Method 2: disable the script debugger

  1. in the Tools menu, click Internet Options.
  2. on the Advanced tab , click on to clear display of each box script error notification, and then click OK.

  Method 3: Verify that Active Scripting, ActiveX, and Java are not blocked by Internet Explorer

  Active scripting, ActiveX, and Java are all involved in shaping the way information displays on a Web page. If they are blocked on your computer, it can disrupt the display of the Web page. Reset the Internet Explorer security settings to ensure that they are not blocked. To do this, follow these steps:

  1. start Internet Explorer.
  2. on the Tools menu, click on Internet Options.
  3. in the Internet Options dialog box, click the Security tab.
  4. click on default.
  5. click on OK.

  Note: ActiveX controls and Java programs are disabled in the high security level in Internet Explorer.

  Try to open a Web page where you previously received a script error. If you do not receive the error, the problem is resolved. If the problem persists, go to method 4.

  Method 4: remove all temporary files related to Internet

  1. start Internet Explorer.
  2. in the Tools menu, click Internet Options.
  3. click on the general tab.
  4. under browsing history, click deleteand when you are prompted, click Yes to confirm.
  5. in the dialog box delete browsing history , under Temporary Internet files, click delete filesand when you are prompted, click Yes to confirm.
  6. under Cookies, click delete Cookies, and when you are prompted, click Yes to confirm.
  7. under history, click delete history, and when you are prompted, click Yes to confirm.
  8. click on closeand then click OK to close the Internet Options dialog box.

  If all goes well, you should be able to print now.

  For more information, see:

  How to resolve script errors in Internet Explorer on Windows computers
  
  http://support.Microsoft.com/kb/308260

• HP LaserJet CM1415FNW: Internal error, Internet explorer cannot print the document such as emails

  Error message received when attempting to print an email OR no matter what generated internet document, for example, an acknowledgement of receipt.

  Error message: "there was an error internal, internet explore is unable to print this document.

  Note: the printer works well for all documents created.

  Hi @OLLA ,

  I see you are having problems printing from Internet Explorer. I'd love to help you.

  I would try another browser to see if you have the same results.  (Chrome, Firefox)

  I have given this document a few steps to try, to see if it will solve the problem.

  Can't print or preview before printing a Web page in Internet Explorer.

  You may need to run the Windows updates.

  If you need help, let me know.

  Have a great day!
  Thank you.

• photosmare HP 7525: print the document does not appear in the specifications

  Hello

  My printer is new and seems to work fine with one exception, when I print a document that she (or any other document) displays in the chorus.   What missing am me...?   Any help would be so appreciated.

  Thank you!

  Video-projector

  Hi @beamer645,

  Welcome to the HP Forums!

  I understand that when you print documents that they appear not in the chorus. With your HP Photosmart 7525 on Windows 7. I'm happy to help you!

  I recommend you to go through this guide, your HP printer print jobs are stuck in the print queue. (Even if the title of the guide may not correspond to your question, I think that the solutions will help).

  Hope this guide helps and have a nice day!

• HP printer does not print the document I try to print, it prints something else.

  Original title: problem in printing a doc.

  Whenever I print a document from my HP printer it does not print the data of the actual document but it prints the file information
  For example,.
  I have printed a document named as G-Life, I wrote a letter to the company in but print the following things in the doc
  File name: G-Life
  Directory: C:\Users\kartik\documents
  Model: C:\kartik\AppData\Roaming\Microsoft\Templates\Normal.dotm
  Title:
  Object:
  Author: kitenge
  Keywords:
  Comments:
  Creation date: 28/05/2013 12:53
  Change number: 3
  Last saved on: 28/05/2013-16:45
  Last saved by: kitenge
  Total editing time: 25Minutes
  from the last full print
  Number of Pages: 1
  Number of words: 65 (approx.)
  Number of characters: 373 (approx.)
  These got printed on my printer, while the actual document is something else.
  If anyone can help me to get rid of it, I'll be very grateful.
  Thank you

  You don't mention the Word version

  In Word 2010, for this doc, file > Options > display

  Highlight print options

  Uncheck "print doc properties.

  If it occurs for all documents, with Word closed, locate and remove the normal.dotm template, it will be re-created the next time that you start Word

• Cannot print the document Microsoft Paint the same size as the original

  Original title: Windows 7 paint

  I can't scan a document in the painting and see the entire page on the screen and especially can not print the same size as the original document.  I'm scanning a single 8 1/2 "by 11" paper in paint and were not able to select the appropriate settings in the properties of the image, or setting of the page to print this document from the size of the original... Help, please... Thank you

  Hi Bob,

  Thanks for posting your query in Microsoft Community and we can help you with your problem.

  You can check the print settings in Microsoft Paint and check if it works.

  a. open Microsoft Paint

  b. click on the drop-down menu in the top-left corner

  c. click print and click on Preferences

  d. on the Page tab, make sure that the settings are correct for the Page size and Orientation

  You can also check out the following articles for more information about the painting:

   

  Resize a picture using paint

  http://Windows.Microsoft.com/en-us/Windows7/resize-a-picture-using-paint

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you