Print this manual as PDF problem

Similar Questions

• Printing of thumbnails for PDF problem

  Using OSx10.6 and InDesign CS3 504.

  I would like to print thumbnails of page quickly in a PDF file, but the only PDF printer I have available "Adobe PDF 9.0"don't let me do.

  After that I configured, I click on print to the printer "Adobe PDF 9.0".  On the Adobe PDF print monitor, I see 'Printer Ready' but reads the message "you must install the software to use this printer.  To install software choose software update from the Apple Menu... "

  To work around the problem I tried exporting to PDF from InDesign chemically, then, in Acrobat Pro 9.3.4 setting up d ' several Page per sheet.  When I choose Save PDF, he said "Saved as a PDF file while printing is not supported, choose File/Save".

  Is there something that I should install?  If not, what are my options for getting thumbnails quickly into a PDF file?

  Thank you.

  http://InDesignSecrets.com/acrobats-Adobe-PDF-printer-replaced-in-Snow-Leopard.php

  Bob

• Problem of image quality when you print the brochure in PDF format

  Hello!

  I searched the whole web, trying to find a solution for my problem, but I couldn't find anything...

  I created a vertical page A5 document in InDesign CS6, filled with high quality photos. Now, I want to print in a brochure (in PDF format) in order to save it and print it in a professional facility.

  The problem is when I do this, the image quality turns out to be terrible...

  I checked my print settings and I can not find something wrong...

  Installation - A4 horizontally, and Graphics - Images - send data - is set to all.

  Is there anything else I can / try? What can I do it wrong?

  Here is a picture of my print settings:

  

  When I export the document normally in format PDF the image quality is fine, but it doesn't have the booklet layout I need, it exports all single A5 pages one after the other. If I try to print this pdf file as a booklet in Adobe Reader, the same thing happens to the images, they lose quality.

  Help, please!

  Thanks :))

  tepatroni wrote:

  Now, I want to print in a brochure (in PDF format) in order to save it and print it in a professional facility.

  Have you checked withthei 'professional establishment' as to what they want. Printers will not, in general, impose you the document. It's their job and they do it in a way that corresponds to the study and the equipment they use for printing.

  That said, your problem with low quality images is probably the default PDF settings. Change them to something useful in Pringter in the Windows properties, or click the settings button in the print dialog box to access the driver from there and set them as you want. I'm sure that when the default installed PDF printer is 'standard' gives you the output of RGB 72 ppi.

• I just installed Adobe Acrobat Reader DC on my Windows 7 computer and can't download a PDF from a government site. I was able to download the pdf of the year last of this site without any problems.

  I just installed Adobe Acrobat Reader DC on my Windows 7 computer and can't download a PDF from a government site. I was able to download the pdf of the year last of this site without any problems. How can I handle this?

  The PDF Viewer for Firefox supports not only this type of form PDF (XFA) or any PDF form really. You must download the file and open it in Acrobat or Adobe Reader, and it will work. You can download the PDF file right click on this link and selecting "save target as".

• AcroPDF in VB6 - text to search in the PDF and print this page.

  Okay, so I'm sure this question has been asked and answered 100 times, but for some reason that my Googling skills are seriously miss you today...

  I have a legacy application built in Visual Basic 6 that generates a special form letter PDF documents.  Each PDF contains all letters that were printed so far.  I really it work all rather decently, but something came earlier that put me on programming new obsession.  I want to activate the following features of my application:

  1. The user provides a text string that must be unique among all pages of all PDF (customer ID).
  2. The application then finds the PDF containing this text string that identifies which number of the page containing this text string.
  3. Finally, send only this page to the printer.

  I can now easily create, view, and print the PDF of my application.  While the creation of the document is made in a third of the reports system, display and printing functions are essentially managed using AcroPDF.dll.  Through the properties and methods available for AcroPDF object, I see that I can tell it to print only the specified pages, which gives me the last part of my needs, and I have the part of the user input down pat.  I'm just totally puzzled to find a solution to the 'step 2 '.

  Suggestions, ideas or comments would be greatly appreciated.  I'm a little tired of banging my head against a wall.  Thank you for your time.

  If you are only using Adobe Reader, then this feature is available.

  If you have Adobe Acrobat, then you have a few options.

  From: Adobe Forums [email protected]<>[email protected]>

  Reply-To: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Date: Wednesday, October 26, 2011 08:15:12-0700

  To: Leonard Rosenthol [email protected]<>[email protected]>

  Subject: AcroPDF in VB6 - text to search in the PDF and print this page.

  AcroPDF in VB6 - text to search in the PDF and print this page.

  created by GHosaPhathttp://forums.adobe.com/people/GHosaPhat> in Acrobat SDK - see the discussion complete onhttp://forums.adobe.com/message/3991293#3991293

• The printer user manual

  I'm trying to locate and download the user manual for printer c310a e-all-in-one HP Photosmart Premium.  HP website has a real problem even locate the printer even after each suggestion, they give me the research.  Can someone give me some help with this?

  {Information}

  Hello

  There is a manual available for download on the link below.

  http://h10032.www1.HP.com/CTG/manual/c02516929.PDF

  Kind regards

  DP - K

• Touchscreen printer LaserJet pro 200 scanning problem

  Printer is HP laserjet pro 200 color MFP m276nw; operating system = windows 7; = error message when I try to scan from the printer pad touch I get the following error: this feature requires the printer to be connected to a network.  I don't have a network.  I have the USB cable connected directly to my turn.  I can scan the computer very well, but not the touch screen. No new software has been installed one that came with the printer.  Does anyone have a solution to my problem?

  Hello

  The Laserjet software only allow scanning the computer using the HP scanning software.

  The digital scanning to a network shared folder allow the printer connect to a shared network folder by initiating sweeping the screen of the printer, this feature only supported by a network and not thrugh USB connection direct connection.

  You can find more info on scanning to a network foldr on page 72 of the user below guide:

  http://h10032.www1.HP.com/CTG/manual/c02851622.PDF

• printing to an adobe pdf error

  I installed Adobe DC2015 on 10 new computer installed with windows 10 Professional. They are attached to a domain server. Now the problem: no matter what program I use (Word, Excel, Outlook, CAD) I always get an error massage when I print a document with the 'Adobe PDF' - printer. In German, the message is: Fehler beim print a PDF from Adobe

  The pdf file is created and I can open it without problem with Adobe DC, but the error message become misaligned and the printer spooler is not empty!

  Thank you for your help

  Hi markusa57,

  You could try to mention below as follows:

  1 check if there is an update available for Acrobat, launch Acrobat > go to the Help menu > then select check updates.

  2. If that doesn't work, try to remove the printer Adobe PDF under control panel and then add it again. Go to control panel > select devices and printers > under printers > select Adobe PDF > right-click on it and select Remove the instrument. To manually add the Adobe PDF printer, visit this link:install PDF printer manually.

  3-If this does not work, try to repair the installation of Acrobat under Help menu > select repair installation.

  Could you please let me know the version of Acrobat installed on the machines DC?

• How can I print the manual?

  It is a question that applies to my two recent purchases of SONY, a SONY kdl60ex720 TV and now a camera SONY DSC-HX100V. How can I print a copy of the users guide? This must been an oversight by SONYS CE Ministère, it is not very difficult to provide an option to print the manual page in its entirety not only one at a time.

  You can use Adobe Acrobat to print all I have manual from the Web site as a single pdf file. You can use the trial version of Acrobat for this work.
  Choose "Create a PDF file from the Web site" and copy the URL. Make sure "load the entire Web site" is selected.

• Print to / save as pdf

  Hello

  Recently I had problems with the conversion of images in pdf files.
  I used to be able to select a group image then right click and choose 'Print' (he then opens a print from Windows Photo Viewer dialog box).
  Then I could then choose a printer (printer Adobe pdf, Foxit pdf printer, printer Microsoft XPS)
  The images would be properly and then save to the pdf format.
  However, now, whenever I try to print the images in pdf or xps, pdf/xps files is always rotated 90 degrees to the left, causing the unreadable pdf. I tried the driver adobe pdf, foxit pdf driver and the driver xps from microsoft without success.
  Is anyway to fix this?
  Thank you!

  What happened when things were at work?

  I suspect that the problem is related to the "orientation" EXIF tag  In the brief search I did, I saw comments complaining that viewers the native Windows 7 image are not properly manage the rotation EXIF information (and possibly corrupt).  Maybe the Photo Viewer interprets the orientation tag go and pdf printers interpret it another way.

  Try to use IrfanView (free) to view the images and set the option "Auto-rotate image according to the EXIF info (if available)."  See http://www.impulseadventure.com/photo/exif-orientation.html

  IrfanView should print the image of how it appears on the screen (there is also a "autorotation" option in the dialog box print IrfanView;) I did not experience to see what it does).

  You might be also interested in reading http://keyj.emphy.de/exif-orientation-rant/

• Printing with Acrobat Reader DC problem

  I am responsible for my company and user including myself is wrong print PDF with Acrobat Reader DC.

  Sometimes when you print it out Document PDF with Acrobat Reader DC the document print most with spot on a part of the text from right on the page.

  It's probably a problem with the police as the finger only where the text should be.

  If I print to the printer even with Acrobat Pro XI of the same document is ok. I'm the only user with install Acrobat Pro XI.

  We experience this problem since all the computer receives the update to Acrobat Reader DC.

  We have an HP Color Laser Printer and Ricoh multifunction printer. All users have Windows 10 Pro (the same problem has happened before with Windows 7).

  Is there a solution or need to install the previous version of the Acrobat Reader software on all computers.

  Thank you

  Pierre Paquette

  Hi pierrep80629097,

  Could you please let us know the version of Adobe Reader is installed on the machine?

  Is it possible to post a screenshot here, post a screenshot here in the forums, please visit this link: https://forums.adobe.com/docs/DOC-7043#jive_content_id_How_do_I_attach_a_screenshot

  Try to print the pdf as image file, in the print dialog box > select your physical printer from the drop-down options menu > select Advanced > check the print as Image > and click OK.

  Thank you

  Shivam

• When I try to print a file ID PDF transforms the drawing in a worse

  Hello everyone

  My name is Ishmael, and I work with InDesign CS6.
  I am trying to print a document from ID, in which I placed some vector designs for Illustrator (and before that, they come to the Academy). The problem I find, to which I was not able to find a solution, is that when I try to export to interactive PDF my drawing quality diminishes, it s like ID do all lines and its thickness in the he loves the most and my picture becomes a completely different, with a worse quality.

  It's the way my drawing actually looks at a preview of the ID. Exactly as I want to be printed.

  

  And that's how ID prints, after that I tried to export the document in PDF format (no matter if I try as an Interactive-PDF, print PDF, or if I try to print with the Adobe PDF printer)

  

  I was looking hard all over the web, and I have not found any similar explanation on what could pass me.

  Is this someone might know that could be the problem?

  
  Thank you so much for all those who want to help me

  Best regards

  Ishmael

  How you view the exported PDF file? In the drive? Acrobat? Something else?

  For reliability, it should be Reader or Acrobat and if it's one of those, try this:

  Edit > Preferences > Page Display > (uncheck) improve fine lines (it is enabled by default; it disable)

• When I print a html to PDF, it displays an error called "SegoeUISymbol not found, using mail.", may I ask how to solve?

  The error message:

  %% [ProductName: Distiller] %.

  %% [Page: 1] %.

  SegoeUISymbol not found, by using the messaging service.

  %% [Error: invalidfont;] [OffendingCommand: show] %.

  Battery:

  ()

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  The problem is probably due to the printer driver options set by default for the printer PostScript of PDF from Adobe driver instance.

  To resolve this issue, quit programs and go to the Adobe PDF printer Properties . On the Advanced tab, press the button default printing . Select the Adobe PDF settings Look for option rely on system fonts only . Uncheck this option. Then press OK. Select the general tab, and then press the button Preferences . Still once, select the Adobe PDF settings Look for option rely on system fonts only . Uncheck this option if it is not already unchecked. Then press OK and click OK again.

  This should fix the problem. Please report back with your results.

  -Dov

• How to print an Adobe Reader PDF page in duplex, using a mac and a brother printer?

  How to print an Adobe Reader PDF page in duplex, using a mac and a brother printer?

  Hey Sanford,

  Adobe Reader and Adobe Acrobat allow you to print double-sided if your printer supports this feature. The printer driver controls the options, not of Adobe Acrobat or Adobe Reader.

  Check your printer documentation to see what features your printer supports.

  Please see this KB document for the steps double-sided printing. Acrobat, Reader.

  Let me know if you encounter any problem.

  Kind regards

  Nicos

• Export to PDF problem - need urgent help

  People - please can someone help me please. I have a tight deadline to get something to print.

  My HDD on my PC went this week with a plop. New drive is everything and running with Adober Creative Suite 5 and Adobe Acrobat 9 pro all recharged.

  I can't print a page (that was no problem on my previous installation) to export to PDF, so I think I have a wrong setting somewhere in Illustrator.

  I am trying to export as PDF Print this file .

  And it comes out in the PDF file with a fair bit of missing text, like this.

  I am panicing that I must do this for the printers in the next hour. Is there someone who can help me solve the problem please?

  Try CS5 update to 7.0.4.  It exports to quality very well here...