Printe all-in - one HP Envy 5530: HP Envy 5530 continues to print

Similar Questions

• All-in-one HP Envy 120: HP ePrint E-mail

  I hope someone can help me with my problem.

  I created an account of HP ePrint for my all-in-one HP Envy 120 printer and then changed the address of e-mail to something which I could easily remember.  So far so good.  However, as this printer could not copy or scan, I replaced it with another printer with the same details of the model.

  Then, I went on my HP ePrint account and deleted my original details of ist printer (as he has been appearing as offline and not connected) and added my new printer via the tab to add devices.

  The problem is, I want now to change this e-mail to my original email (easy to remember) address address but when I click on the option change Email, it is grayed out and cannot be changed.

  Can someone help me with what I want not a random email address

  Concerning

  Hello

  A specific ePrint address cannot be assigned to different devices... Your previous address can not be used on your new printer.

  You will need to select an email address unique for your new printer - sorry.

• HP Envy 4500: Compatibility of series e-all-in-one HP Envy 4500

  Currently I have Pavilion TouchSmart 11 Notebook with 64-bit Windows 8.1 and series e-all-in-One HP Envy 4500.  I'll upgrade to 10 Windows and amazing that my printer still works with Windows 10 or I have to install a new driver in order for my printer working on the new operating system (Windows, 10).

  Thank you

  Hello

  More likely, you will need to reinstall the drivers of HP after the operating system upgrade.

  You can try using the software and verify that it feature, if you experience problems, uninstall the HP software and reinstall the latest version of the software for windows 10 of HP.com.

  Kind regards

  Shlomi

• HP ENVY 4520 all-in-one: HP ENVY all-in-one 4520 can't turn off

  I can't turn off my printer, it enters mode "Eve" only.  I press the power button, it comes to life, tap again and ensure that as soon as the switch mode.  Any help would be appreciated.

  Hi @Freckles60,

  Welcome to the Forums of HP Support! I see that you have problems with putting off the printer. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Do a hard reset of the printer.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer, to see if that can help, printer All - in - One HP ENVY 4520

  Select your operating system.

  How is the printer connected?

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Office all-in - One HP Envy 23-c010 there a tv tuner?

  Office all-in - One HP Envy 23-c010 there a tv tuner? How can I find and use it? If this is not the case, what should I get?

  Thank you

  Hello

  Machine has only a small room for something like:

  http://www.Amazon.com/AVerMedia-A301-mini-hybrid-tuner/DP/B00B1SBOTQ

  You can use for free to air channels and as it is small you need a very GOOD ANTENNA to connect to your machine. It will not connect/replacement of cable TELEVISION networks

  Kind regards.

• All-in-one HP Envy 4500: printing a Web page

  The procedure to print a web page has changed all of a sudden.

  Until today, it's simple. I clicked on the print icon in the bookmarks bar. This launches the print dialog box. I then clicked on 'Préférences' to select the print quality and finally on 'print '.

  Today, I wanted to print confrmation of a command line. When I click on anything that is in the print dialog box, another window open.

  I managed to select my printer, but when I clicked 'Print' nothing happened. In addition, I could not any setting beyond the number of copies and if you want to print on one or both faces. What is going on?

  Hi @hbf1842,

  What is the new name of the printer now listed as default printer in devices and printers? (Like 4500 or class envy 4500)

  If the class driver is installed, it would be a preinstalled Windows driver and it should not the automatic option to duplex. You will need to remove and add the urge to 4500.

  If you still experience problems, uninstall and reinstall the printer software again.

  • Uninstalling the software of the printer (Windows).
  • HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  The HPePrint driver is automatically installed with Windows 8. Just make sure that it is not selected as the default printer in the future.

  Thank you!

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Printer all-in-one HP Envy 100

  I want to scan slides on this printer.  Can I do it?

  ENVY 100 all-in-one printer does not support the scanning of slides.

  There are several manufacturers that offer scans of slides or negatives. Here are the couple of scanners HP that support the digitization of slides:

  ScanJet G4050:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L1957A?HP-ScanJet-G4050-photo-scanner

  ScanJet G3110:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L2698A?HP-ScanJet-G3110-photo-scanner

• HP Envy 4500 e-all-in-one: HP Envy 4500 print size

  Since I installed this HP Envy 4500 e-all-in-one printer, it prints in small text. I went to tools, options and preferences and can't seem to find a way to change the print size. Any suggestions? Thanx

  Hi @husky52358,

  Thank you for visiting the Forums from the HP Support! I see when you print to your HP Envy 4500 text is very short, you tried to go into the preferences and options without success.

  You try to print a document or an element of a web page? What program or browser you use?

  If you are using a Windows operating system, please try the following:

  1. open an Internet Explorer browser, go to the far right click on the gear icon

  2. Select Print Preview

  3. now along the top, you will see an option to change the size of the page, please make sure that it is set to adjust or 100%.

  4. now, try a test page, the text is expanded?

  Now go ahead and run the HP Print and Scan Doctor:

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know the results.

• 7640 envy printer e-all-in-one: 7640 envy printer e-all-in-one: no fax tone

  I recently bought this printer to replace an older HP all-in-one. Everything works fine except that I can't get a dial tone to the fax, only a busy signal. We have a phone system 2 lines Uniden, so a divider is used to the telephone wall jack. The fax line is our second phone line. I have not had any problems with the old printer, replaced. Yes, the phone cable is connected to the right places - 2 between the separator and line 1 of the printer online. Any suggestions or, I hope, a solution? I don't understand the instructions of connecting the answering machine directly to the printer, because the answering machine is not an independent unit, but part of the Uniden phone system. Not that it is important, but AT & T is our telephone service provider. Apart from this question, this printer is fantastic!

  Thank you!!

  SOLVED

• All-in-one HP ENVY 5530: problems scanning with Windows 10

  10 Windows does not recognize the scanner of my all-in-one.  I have no problem with it recognizing the printer and printing.  I removed the device and reinstalled several times.  As soon as I did this I can use the scanner in the device only, but not from the pc.  When I turned off the pc, it disables the scanner and I have to start all over again with delete and reinstall.  What should I do to solve the problem?  Thank you.

  Hi @Anina,

  Welcome to the Forums of HP Support! I see that you have problems with scanning. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  You may need to temporarily disable any Antivirus software, just to be sure, that it is not interfere with scanning.

  I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

  Please let me know the result and if there is anything else I can help you. Thank you.

• Printe all-in - One HP ENVY 7640: Wired AND wireless?

  Question: If I buy the above printer, can I print using my Wired

  I bought an OiiceJet 6500 has some time ago. I was VERY disappointed. It does not Duples, I get EITHER Witred or wireless (not both). Of ink refills are EXPENSIVE and they only last for a few weeks. After a few months it stopped paper feed and no matter what we tried sound from a white elephant.

  I won't be suckered into another very poor printer with the consumables very expensive printer that only half of us can use

  Hello

  This printer supports RJ 45 cable and wireless however both can not be active at the same time.

  The best configuration that can be used there to connect the printer to the router by Ethernet cable / wireless (depending on your choice).

  Connect the iPhone, ipad in the same wireless router.

  Use of the HP all-in - One Printer Remote app to print.

  Link to the app in Itunes in HERE

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• HP Envy Touchsmart all-in-one: HP Envy 23 computer stopped working

  Our Envy of HP TouchSmart All - in - one PC off while in use, as if the power went off.  We have unplugged and let it sit for 12 hours and plugged in.  The power cord green light is on and the white light where to plug in the adapter at the rear of the central unit is on, but it won't.

  Is there a trick to get back on?

  Model # 23 - d034

  Serial number is [removed personal information]

  Product # H3Y87AA #ABA

  My son disassembled the computer. The motherboard was fried.

• Of all-in - One HP ENVY 23-o014: Replacine the processor...

  Hello. How do I remove the back cover of the LCD, so I can replace the processor in my HP ENVY 23-o014 All - in - One desktop PC (ENERGY STAR)

  Thank you...

  Hello @britlord,

  I understand that you are looking to replace the CPU on your desktop computer, and I'd be happy to help you in this case!

  If your computer is still under warranty, please contact our technical support for further assistance in this matter by clicking on the link below to get help from your region number.

  www.HP.com/contacthp/

  If your system is no longer under warranty, please following the steps below to remove the rear LCD of the coverage:

  Remove the door from the CSR

  1.) place the computer face down on a smooth flat surface, ensuring support is not hung at the edge of the table.

  2.) lift the stand to its vertical position, so that the bottom of the stand is parallel to the table surface.

  3.) drag each lock that fix door CSR to the computer toward the Center.

  (Slide 4). CSR to the bottom of the Assembly of the door down and remove it from the computer.

  Remove the back cover

  (1.) the two captive torx screws near the lower part of the back cover.

  (2.) continue to unscrew the screw until each of them makes a clicking sound and the screw completely discards.

  3.) apply a good amount of pressure on the back of the rear cover while pulling on the edges of the cover. This should help release all tabs on the lid, along its outer edge.

  4.) lift the cover diagonally to clear the stand. Carefully remove the cover from the computer.

  Remove the memory cover

  1.) squeeze the release latch for the cover of the memory until it the lid pops up.

  2.) remove the cover of the computer.

  Remove the EMI Shield mother board

  1.) remove the three torx head screws which fix the shield EMI of motherboard on the desktop. Each location of the screws is indicated by a template of an arrow with three circles on the inside.

  (2.) the nozzle upward the inside edge of the shield and remove the shield completely from the computer.

  Remove the thermal Module

  1.) remove the four screws torx in captivity on the processor in order indicated by the labels on the thermal module templates.

  (2.) to detach the system head torx screw at the end of the thermal module radiator.

  3.) be careful to lift the thermal module of the computer.

  Remove the processor

  1.) press down to release the lever of the retention pin CPU load and then back.

  2.) lift the load off the Jack plate.

  3.) take note of #1 Pin of the connector of the brand in terms of the size of socket. You will need to align the corner pine #1 the Intel CPU removal tool. This tool is needed to prevent unnecessary damage to the processor or the components surrounding it.

  4.) press the piston of the removal tool to pick up the CPU of the socket.

  5.), turn off the tool and the CPU of the system board.

  Please re-post if you need extra help, in addition to the steps. I look forward to your reply!

  Concerning

• HP envy 27 all-in-one: hp envy 27 starts any upward

  Spoiler (Highlight to read)

  Hello

  can you help me please

  I bought a fancy hp 27 inch all in one pc in April 2016

  and 2 days ago I turned it on in the morning and it wouldn't start windows at all the

  said trying to fix I tried everything but nothing would work.

  so I went on chat with hp and I said as he picked up and repaired but the guy said no, you buy the recovery USB stick so I bought it and it came today

  I sit all day and night try all options to get support at the start and it just won't start upward in it at all.

  IM at my end intelligence cost me 1,600.00 2 months and that it just wouldn't come not new

  one would be please to help me with this please.

  Thank you

  Hi there @Pep3,

  I hope you find your experience of positive Support Forum!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your computer starts correctly.  I'm happy to help you with this.

  I can certainly understand your frustration with the situation, and I'll do what I can to help you through this. However, I have some information.  Please send the complete product number and check the operating system on your computer. Check out the following, if you need assistance with this information.  HP desktop PC - how can I find my model number, serial number or product? Computers HP - how to find the Windows Edition and the Version on your computer.  For now, I'll go on the assumption that you are using Windows 10.  

  The system always begins with the same message of self-healing, you saw the first time?

  When you were on with a cat person they suggest trying a system restore or recovery of the plant?  If your system is shipped with Windows 10 or regardless of the version of Windows was preinstalled, there should be a recovery partition, you can use, provided that the hard drive is not defective. In this case, try this document: HP - computers perform a recovery of the system (Windows 10) HP. That your computer does not start successfully, use the section titled "recovery when Windows 10 does not start correctly.  This will restore the original image, even assuming that the recovery partition is intact. The downside to this is any data you have stored will be gone after the factory recovery image, unless you have previously supported some of them up to an external drive or device.

  You may also want to consider some of the suggestions in this thread: Windows 10 repair restart buckles - windows10forums.com. There are several suggestions offered by some users who helped to solve this problem for others. There are also links to download an iso of Windows 10 to make an if necessary boot disk.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• All-in-one HP Envy 5530: printing on all-in-one HP Envy 5530 error

  I got this special printer for less than a year and this is the first problem I've had with her.

  Recently, whenever I try to print something, I click Open Active printers and after a while the work in the print queue displays "Error-printing" and will not start the print job.

  He also said that it is properly connected to my network so I reinstalled the software and drivers and restarted my system trying to solve the problem but there was no change.

  Hello @BryanMiller, hope you are well!

  Thanks to their participation in Forums of HP! I see by your post that you are having problems printing using printer Envy 5530. I will definitely do my best to help you.

  First of all, we will try to solve this problem using print HP and Scan Doctor (PSDR). PSDR is an automated tool that allows you to diagnose and resolve problems printing and scanning. Visit http://hp.care/2bZ9w2q to download and run the HP PSDR. Once you open the program, click on "Printing problems" to diagnose and fix the problem automatically.

  Please let me know if it works for you.

  Good luck!

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!