Printe will not print. Says that 'the printer door is open', but no door is open

Similar Questions

• I subscribe to the student package and I also received a confirmation SMS saying that the sum was deducted. But when I connect through creative cloud, it shows that I'm still working on a trial version. Why is this?

  I subscribe to the student package and I also received a confirmation SMS saying that the sum was deducted. But when I connect through creative cloud, it shows that I'm still working on a trial version. Why is this?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Mylenium

• Windows will not honor "always use the selected program to open this type of file."

  When I try to open a file *.img using 'open with... '. "I get a window of"Leader Type Helper"asking what software I want to use.  I have check "open this file using a software program (sic) that (sic) is already installed."  This very unnecessarily opens another dialog box titled 'open with' * Sub * the files already browser window fill the screen while I'm not yet aware that the box is here.  Having managed to find, I choose "7-Zip File Manager" and click on the box always saying "use the selected program to open this type of file", and then click OK.  This opens the file using the selected program, as you wish.

  However next time I try to open a *.img file, I again get the window "Help file of Type" and must go through the whole process again.  (By double-clicking on the file shows "Windows Disc Image Burner".)  Why don't Windows 'always use the selected program' like I asked?  Windows is aware that I have chosen before, because it is considered to be the only 'recommended program' in the 'Open with' dialog box  Thanks for any help!

  Care to try another tool?  This small utility can help: http://izt.name/apps/types/

  You will find the file type in the list of icons (.img files, then), and then to change what he uses to open the file by clicking on the option 'open' and edit the properties.

  

• create dvd Windows Vista does not burn, saying that the disk is not writable

  WINDOWS DVD MAKER on VISTA.  Don't burn the disk.  Teling guard me drive is not a writable disc, but I know that it IS writable.  I dropped the slides, yet will not burn.   I gave up the video, still will not burn.  I gave up the audio, still will not burn.  I tried to burn with a single (audio, video or slides) and still no combustion.  Can anyone help?

  Disable all filters may be worth a try... see the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) What to do in case of problems)

  Maybe you have a problem with the hardware with the optical drive itself.

  Are you able to burn DVDs using other software?

  The following free DVD creation software can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Ulead, etc... but at least it is a start.

  Good luck.

• Service Pack 1 will not install after that the pc has been reset to the factory settings

  At my pc reset due to problems of crashing and freezing factory settings, when turned on after resetting received masses of updates Service Pack 1 has not been installed, but it shows in the story as being successful. He reappears in the form of waiting for update installation, but when the terms & Condtions accepted the installation takes a few seconds, history shows successful but it has not yet installed. So I can't install SP2 to update Internet Explorer 9

  Hello.

  Thanks for the reply. I found a previous question with a similar problem as mine, there was a solution that I followed and was able to install SP1. I should have done this before my question!
  I also installed SP2. Resetting to the factory settings was a last resort due to a problem I was experiencing, but after installation of SP2 my original problem reappears. The problem is now in terminal phase and looks like a new pc.
  In any case, once again thanks for your help, I know where to go with future questions I have.
  John

• will not synchronize contacts from the iphone, they synchronized some but not all

  so I try to synchronize my contacts sync only some of them, BUT its cuz weird when I go to imessage or text messages someone there in there just its their number or the email not their contact name as in my iphone, and if I add them as a contact, then it will add to my phone so patients have two contact here in my phone? that I do not understand? Help me please, I just got my macbook too.

  The following can help: get help using iCloud Contacts, calendars, or reminders - Apple Support

  Can help a lot of things in there, but I would like to mention in particular the section on "see who represent your contacts are in.

• I got a message saying that the RPC server not available. I can't print or download the software for my printer.

  I got a message saying that the RPC server is unavailable.  My print spooler seems OK and my Dependencies tab it shows not itdepends on CPP, but I can't use my printer and I can't download the software because the driver is missing.  I can't download the driver for some reason any.  My printer is a lexmark X 1190.

  Hi donnasmum,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. do you have security software installed on the computer?

  Method 1

  According to the Lexmark solution, you will need to restart the service on the computer print spooler.

  Error: "the RPC server is unavailable."

  Method 2

  If fails it to step above then check out the link below and run the fixit tool available.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

• Want 4500: I get a message saying that the "the printer is not connected.

  I just bought a HP Envy 4500 all in one printer.

  I can't print to it without having to restart it every time.

  I get a message saying that the "the printer is not connected.

  I can access the built-in web server, so I am sure that it is connected.

  It seems that he is going to sleep but cannot be awoken by activity.

  I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

  The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

  I uninstalled and reinstalled the printer.

  The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

  If I try to scan I get an error-9923

  Hi @jpkeates,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

  Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

  Make sure that the multicast is supported

  If you use a wireless network, make sure that muticasting is supported and enabled on your router.

  If the new connection is working, you know that the printing problem is tied to the computer.

  If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

  Disable IPv6 (network connection)

  Disable IPv6 on the printer to make sure IPv4 is used on your network.

  If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

  If your printer does not display, use the built-in web server (EWS) to disable IPv6.

  From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

  NOTE:

  If the Web page appears empty, try another Internet browser.

  Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

  Select enable IPv4 only (or similar).

  Figure: Configuration example IPv4 using an integrated Web server

  

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide and help the steps!

• My computer has been recognizing not my two printers. He says that the printer spooler was not working. So I uninstalled my printer and when I tried to reinstall I received a message that the RPC server is unavailable.

  My computer has been recognizing not my two printers (which I have had for years).  The message says that the "spools of printer was not working" when I tried to print.  So I uninstalled my two printers and tried to re - install.
  Then I get a message that the "the RPC server is unavailable".

  Hello Sue Strong,.

  Thank you for your message.  Let's try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.

  Click the (+) sign next to "Services and Applications" > select 'Services '.

  On the right, find and right-click "RPC Remote Procedure Call ()" > select "Properties".

  Select the "Recovery" tab, then successively in first failure, second failure, etc. "restart the Service"

  Validate the change OK
  Stay in the services menu.
  On the right, find and click on "Print Spooler" > select "Properties".
  Click on the 'Start' button and check the "Startup type" is set to "Automatic" and click OK.
  If these steps resolve the problem, click HERE for more information and troubleshooting techniques.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• I can't start my print spooler, as it says that the following file is missing. How can \WINDOWS\system32\spoolsv.exe I download it?

  I can not start the print spooler as it says that the following file is missing.  C:\WINDOWS\system32\spoolsv.exe.  How can I download it?

  Do a search on your computer, it may have been accidentally moved to another directory. You can also run the System File Checker:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  or you can just try to copy the file from another computer.

• Distiller 4.0 will not be displayed in the topic of my printer (XP)

  Hello

  This isn't the right forum, but I couldn't find one that applied because I use XP and my system and SW is old but still works fine.

  I was deleting unnecessary files and deleted adobe pagemaker 6.5 which unbeknowst me deleted Adobe Distiller 4.0 that came with it.

  I love Adobe Distiller 4.0 because I can make a .pdf of what either.  I often use it to make a PDF on a Word, Excel, and even Web pages.

  I reloaded it, but it will not be displayed in the printers section.  Basically, I go to print something and choose the option to distil instead of my printer and it would create the .pdf.

  I was wondering if someone could help.  I don't really like to download any free .pdf decision-makers because I really liked how distillation works.

  Thank you.

  Paula

  To clarify a bit for you (I don't know which Acrobat Distiller 4 was designed for, but probably 4 or 5). At that time, there were 2 distillers that caused confusion. One was the printer driver that you are talking about and the other was in the program. The print driver was actually Setup to run Distiller in the background, where the name of the driver. In current versions, the driver was renamed the Adobe PDF printer. This may have been distributed as part of package PM that you had, but I don't think he was probably part of the packaging itself, but an add on. You should seek an additional part of the distribution to install. In addition, you also probably have Acrobat Distiller installed program and be available in another program in your system.

  When properly installed, you should have, the pilot program of printing and AcroTray.exe running in the background. (Listed under Acrobat Assistant a few announcements at the beginning of the program) is a program that runs in the background to allow the print driver send print file (.ps file) to send to distill the PDF creation to complete. All three should be there. You can check if you have an Acro... or such driver in the System32 folder. That would be your printer driver is needed.

• When I try to print PDF documents, I forst get a little screen that says that the document cannot be printed, then a small screenthat says no pages have been selected.  I can't even print the entire document.

  When I try to print two important documents, I first get a little screen that says that the document cannot be printed, then a second small screen that says no pages have been selected.

  Hi oldrealist,

  Try the following: open Adobe Reader | Change | Preferences

  • under Documents, change "Show the documents in PDF/A mode" Never.
  • under (enhanced) protection, clear the Safe_mode at startup.

  Let me know how it goes.

  Kind regards

  Nicos

• When I try to print to PDF it says that I need to buy Acrobat, but I have a monthly

  When I try to print to PDF it says that I need to buy Acrobat, but I have a monthly

  Hi kathleeno16779124,

  Open Acrobat, go to the Help menu and select Disable/Sign Out.

  Relaunch the application, again, go to the Help menu & select Activate/Sign In.

  Activate Acrobat using your Adobe ID & then try to reproduce the problem.

  Kind regards

  Nicos

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.