Printer Adobe XI does not not with Windows 10

Similar Questions

• P1102w: Problem installing P1102w, PC, printer is on does not recognize, Windows 8

  I have problems to install the printer.  Loads of software and extracted, then when I go to wireless network connection, it says he's expecting me turn on the printer when the printer is turned on and connected to the USB port.  I even changed USB ports.  It is still not let me install.

  Hi @gawright59,

  I see that you have problems of configuration of the printer on the wireless network, the printer is not recognized as the USB connection during installation. I will definitely do my best to help you.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect.

  The best way to solve this problem is to unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation. Select the wireless installation. (do not install the printer as a USB connection and then run the Wireless Setup Wizard)

  The other way to resolve this issue when you receive the message, is to leave the USB cable connected, remove the printer in the devices window and printers and Device Manager.

  Here are the steps for access to the devices and printers and Device Manager.

  From the desktop, hold down the Windows and X. This will bring up a list, open Control Panel and then devices and printers. Right-click on the printer and on the left, click on uninstall.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  Feel free to click on the "Thumbs up" button below if it helps.

  If there is anything else I can help you, let me know. Thank you.

• Magic mouse 2 scrolling does not with windows 10

  I installed windows via boot camp 10. Now when I start with windows, I can move the magic mouse 2 on the screen but the scrolling with the mouse works do not. When I start with Osx 10.11.4 mouse Magic 2 doesn't have a problem.

  have you installed the bootcamp drivers that you create within the bootcamp utility in OS X?

• Windows 8 Adobe Reader does not open fully compiled with multiple PDFs in one alone - why pdf?

  Windows 8 Adobe Reader does not open fully compiled with multiple PDFs in one alone - why pdf?

  You can not post attachments in the forum; only insert images in the post.

  Regarding the Flash Player message; If this document contains all the rich media, you will need to install the Flash Player plugin (and not the control ActiveX that is already installed in Windows 8 IE10).

  Download http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe plugin setup

• ""(Print Screen) print Scr key does not work is not in Windows XP Pro - (no LOCK "F") "."

  I have Windows XP - Pro.  The "Print Scr" button does not work and niether is the combination of keys 'Alt + P'.  My keyboard is not an "F LOCK" / key "F Lock feature" because it has a "Num Lock" key  There's no other keys on my key Board that suggest even a '___Lock' of any kind.  If not, how can I get this feature.  Oh... and one more thing, Microsoft/people sending responses to others, here, to "Social responses" can you try to be a little more specific with what you're talking about?  As your knowledge is greatly appreciated by many, many of us are unfamilliar with computers and have NO idea what you're referring to.  When Microsoft did not find something or is just lazy to do so, he advises people to "ask the administrator of the computer.  I'm the "computer administrator", but I'm inexperienced! How does it work?  Thank you all.

  On Saturday, August 14, 2010 12:57:22 + 0000, Firstname, Lastname2 wrote:

  I have Windows XP - Pro.  The "Print Scr" button does not work

  In the days of DOS, the print screen button to print the screen. But
  in all versions of Windows, it works differently and the name of
  the key is now an anachronism. The key is not to print the screen.
  PrtScrn captures the entire screen and Alt-PrtScrn captures activate
  window.

  Either a capture of the image in the Windows Clipboard. Once it is in
  the Clipboard, you can paste (Ctrl + V) into any application that
  supports graphics (Windows Paint, other graphics software, even your)
  favorite text processing). You can change or add to the image you
  like, then print it out.

  This ability to manipulate the image in a program before printing
  is an improvement on the original method of printing the whole back.
  But if you like that old return facility, there are several
  freeware/shareware programs from third parties which can do, such as
  PrintKey2000 to
  http://www.Sharewarejunkies.com/00zwd2/printkey2000.htm

  Ken Blake

• Help with the Printer Spooler service does not work error

  How can I fix printer service spooler does not work error? My two printers won't work now, and re - install the printing software produces error messages. Tried to use microsoft fix - it for printers without result.

  Thank you.

  Hi elvenlord21,

  See the article below which has some useful suggestions to fix the print spooler error.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  See also:

  Error message when you use the Add Printer Wizard: "Operation could not be completed.
  http://support.Microsoft.com/kb/314876

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver for printer Samsung ML2165 does not load the States, it is not compatible on Windows 7

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I am trying to download a driver for a Samsung ML2165 printer but it does not load, he always says they are incompatible, and the port does not recognize the printer, any ideas please.  I use widows 7, on a Lenova 3000 series desktop computer.

  You did that you downloaded the correct driver for the correct architecture (32 or 64-bit) Windows 7, you use?

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  In addition, you should try to install the driver first before connecting the printer.

  1. install the driver

  2. restart the computer

  3. connect the printer

• my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  Hello

  You tell us what type of license you have.

  If the former was preinstalled, NO, you cannot transfer it.

  Read this information:

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  See you soon.

• My acrobat from adobe pro does not work and no earlier version is available download again with my n serial

  My acrobat from adobe pro does not work and no earlier version is available download again with my serial number

  He can count on what version you need to download... Here are the links for the perpetually licensed versions that Adobe has:

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Acrobat 9: 8 - http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

• I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Pouvez anyo

  I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Can anyone help?  I tried all the troubleshooting steps that I could find in the forums and online without success.

  

  I managed to fix it.  I found the Mr. Fix It tool on the Microsoft Web site and who was running, and it worked.  He fixed the corrupted registry file and allowed me to install the player.  I had tried it once before, but it has not been successful.  This time, it worked.

• I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  See download Acrobat 7 and CS2

• Adobe story does not lines of dialogue that are amrked with (CONT'd) in a CSV export.

  For some reason any Adobe story does not export the lines of dialogue that are marked with (CONT'd) in a csv file. The rest of the dialogue exports very well, little bits that are marked with (CONT'd) are not displayed in the dialog column!. It can be changed with some settings or is this a bug? The script was imported from a file FDX. If anyone has a solution for this, please let me know.

  Thenk you.

  Thank you for reporting this issue.

  It is indeed a bug.

  Just to get the correct data in csv, a workaround for this problem would be to replace the word "suite" with a door-place Word, perform an export to csv and then change it back.

  1. press Ctrl + F in the script to open find/replace

  2. replace the word "Suite" with a placeholder Word, say "TEMPCONTD".

  3. the export to csv format script

  4. now replace the word placeholder with 'Suite '.

• Built with CCP by the package Adobe Acrobat does not completely settle

  Built with CCP by the package Adobe Acrobat does not completely settle.  It starts as if it's installing just fine then suddenly disappears without error.   I'm installing under the local administrator account and simply double-click on setup.exe created in the build folder.  Am I missing something?

  Hi rivera2u & TRU Software,.

  I think you're just double click on the deployer of Exception and not running the same command prompt. Below is the syntax that we use everything using the deployer of Exception on your machine (s).

  ExceptionDeployer    --workflow=install    --mode=pre|post    --INSTALLDIR=    --installLanguage=forAcrobat>    --abortOnFail    --help

  The same is mentioned in the link shared by Abhijit earlier.

  Please let us know if it works for you or not.

  See you soon,.

  Michael Sharma

• Adobe Flash does not work with mozilla, works will be all other why e/s?

  A recent update had left my computer do not leave Fire Fox on the internet, so I uninstalled and reinstalled and found out then that I had to re add it to the firewall, because he could not work. Then, when I went on she worked and loaded fine, but now my adobe flash does not work, I can't use you tube, or and videos using waves of shock/adobe flash. I downloaded the last verse. I rebooted each time. To the Mozilla help page, I've been several times for 2 days. and I am no better. off

     I think it is only blocked, as the flash player worked on internet explore, AOL, So how to i find this out, or if someone else has had same problem and fixed it please let me know, All this automatedness, sucks...need to talk to person, thank you for your time
  

  You can also try using the media player to HTML5 on YouTube.

  • http://www.YouTube.com/HTML5

• After cleaning viruses with Norton software, I lost my Brother printer connection. Message: Printer Spooler Service does not. Can anyone help me to restore

  I lost the connection to the printer or I can add a printer because it - Printer Spooler service does not. Can you have a suggestion or an opinion. Thganks much. Michael

  Right click on 'My computer' / select 'manage '.

  Under "Services and Applications", select 'Services '.

  Check to see if the "Print spooler" service is "started" and "Startup Type" is set to "auto".

  Also check if the 'RPC Remote Procedure Call () service is also "started" and "Startup Type" is set' auto.

  J W Stuart: http://www.pagestart.com