Printer and operating system does not

Similar Questions

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• inst-08072 operating system does not ipv4 support

  The installation of obiee 11 g, I get error "inst-08072 operating system does not support the ipv4". I changed the hosts file and set a loopback adapter.

  But it still doesn't work. Do you have any supposal for the problem?

  etc/hosts, file;

  resolution of name localhost # is handled within DNS itself.

  : 1 localhost

  127.0.0.1 localhost

  192.168.2.103 server1 localhost

  192.168.2.20 localhost

  Server is 2008R2

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• Operating system does not stop. It continues to run after I pressed the close button.

  Operating system does not stop automatically.  Computer continues to run after I pressed the close button.

  Hi Solodeseo,

  Try method listed http://support.microsoft.com/kb/308029. Hope this will help.

• My operating system does not support Lightroom CC can I use Lightroom 4 without having to pay for it?

  My operating system does not support Lightroom CC can I use Lightroom 4 without having to pay for it?

  It is unlikely, unless you manage to find a way to get Lightroom 4 for free.  Adobe does not offer it.

• Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  If you use Windows XP / Vista or Mac OS X 10.6.8

  You must install Adobe Application Manager , to help you install CS Photoshop version 6.

  Windows: After installation, creates the shortcut on the desktop.

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Mac: After installation, created the launch within the Applications folder icon.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

• My computer will not open certain programs, and the system does not.

  I have really no idea what's wrong with my computer, so I'll just list the symptoms.

  The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how many times I tried.  I went to restart my computer, and that opens up a host of new questions.

  My antivirus - Windows Live OneCare - software does not open.  I tried to turn on Windows Defender for malware, but it crashes when I try to do.  Not only does iTunes opens, but neither a few other programs I have on my computer--mainly those who could help me to solve this problem, such as the restoration of the system.  When I try to uninstall a program - all - nothing happens and he refuses to let me try to uninstall anything else, insisting something is already uninstall.  And my computer can't detect my printer.

  Which leads to my other problem: I have two computers connected to a network via an Ethernet cable.  The other computer is fine and can access the Internet fine, but when he sends something to the printer, nothing happens on the end of the printer.  It is a red 'X' the symbol of my network on my computer in the lower right corner (next to), so I guess this confirms my concerns about the network.  I don't understand what exactly is the problem, just that the other computer cannot print (it is not connected directly to the printer, mine is).

  Because Windows Live OneCare and Windows Defender does not work, I can not scan to see if it is the result of spyware or malware.  And because whenever I click on the system restore, nothing happens, I can't restore the computers to something else.  I'm completely stuck.  More critical functions simply do not work.

  If you have Vista then the Windows 7 upgrade that will take and install without problems, but the editions between operating systems need to be adapted, Home Premium, Home Premium edition, or higher, you cannot switch to a lower version.

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You never provided the installation diskettes, it's unusual for OEM nit of a recovery hard disk Partition.  Check any manual provided, or go to the manufacturer's Web site and see that your machine is delivered with.

  Failure one of the reasons for CD or DVD boot's Boot in the Bios options to have the hard drive initialization before any other media.  You may need to check the settings in the Bios and put them accordingly.

• Operating system does not support Microsoft Fix - It

  Try to download the microsoft fix - it. Impossible Solution Center to-said response system does not support. How can I get my system to support?

  Try to download the microsoft fix - it. Impossible Solution Center to-said response system does not support. How can I get my system to support?

  As strange as it sounds, unless you provide the information, we can not say that your system is or what FixIt you would have attempted to download.

  Learn how to ask a question.

  To identify your Windows version, including service pack, right-click on desktop and select Properties.

  Rather than trying to understand on what particular FixIt you were trying to use, explain your problem and include the full text of the error message may be received without paraphrase (not the message about the FixIt is not supported).

• Pavillion dv7 6c95dx: print software prints and SimplePass sensor does not work

  Hey there,

  I have a HP Pavilion dv7-6c95dx and prints print sensor and SimplePass software does not work.  I am unable to find the relevant drivers/etc on HP website.  Any advice would be appreciated.  The unit was bought in the USA.

  Thank you.

  Hello:

  I think that this driver since the dv7t-7000 will work as well as the security software to save your fingerprint.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

• Made a big mistake in trying to get rid of the partitions on the coming Pro 8. Operating system does not load!

  Hello

  First time on this type of forum so I hope that what I write is logical.  So, here.  I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk.  I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used.  I tried to reclaim that space.  I made a copy of recovery on the micro SD and that seems to work very well.  Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition.  The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition.  I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this.  Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ».  I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB.  At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive!  I assume that the driver is not loaded on a USB boot.

  Now I am trampled.  I don't really know how to go further.  Is there a way to get the drivers to load from the USB?  Can I send my tablet in a magical place where qualified technicians will be re - build it for me?

  Any assistance or moral support would be greatly appreciated.

  Thank you

  Richard

  Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way?  At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.

• Operating system does not load unless the 2nd hard drive is in.

  I have 2 installations of windows 8 (one in each of my 2 hard drives). The hard drive is almost broken, but it seems that if I unplug it I won't get a screen asking me which operating system to load from. I want it so I have 1 hard disk whereas my os works can start. How to do this?

  Looks like all the boot information on the main active hard drive. If this drive is not available, then the other operating system is not available. Reconnect the drive which can boot into Windows 8 and create recovery media that allows you to recover the drive which is not booting:

  create a repair disk:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  Boot from the recovery media that you create.

  (a) in the screen install now

  (b) click on repair your computer

• I am running vista micrsoft turned laptop and turned on and it won't what whether only States of operating system does not

  my vista operating system isn't work pressing f1 and f3 f10 and still nothing. try rebooting and still nothing someone has an answer.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner