Printer Canon IP pixm1500. The heads need cleaning

Similar Questions

• 4635 Officejet prints black box in the header instead of jpeg image

  I have an Officejet 4635. I got it for probably about a year. Never had problems printing with it before. Recently, when I try to print a doc word with a jpeg image in the header, the image will print as a black box.

  I recently got a new router - an ASUS RT-N66U Dual Band 3 x 3 Router Gigabit Wireless-N900.

  Hey abeeftaco, (nice handle)

  You may very well be right! I recently installed Office 2013 and have no more question. Did not the connection until you pointed out.

  Thank you!!!

• How place of content between the header and tabs?

  I have the header part which must be constant through the portal but below that I have 3 links
  as I AM an employee, employer, broker...
  
  which showed that in the homepage above the tabs...
  How can I do this...
  
  How place of content between the header and tabs...: () kindly help...

  Hey djo
  Try these approaches and see if it works.

  1. in the header Section, page footer you shell header and add a Portlet header. This JSP file associated header Portlet will be all static content in the upper part. In the lower part, add these 3 links say right. Show these links only based on certain properties of the query as isHome. Now for the main book House and another page associate a BackingFile. In this backup file in the lifecycle methods preRender or handlePostBack, get BookManager instance and all pages and see which page is active. For this page, see its page definition label which will be always unique. IF the page def label is like home_page_def (it is the wording of the page def you give to the homepage), then set the value of the key in the request as isHome = true property. The only doubt is after book backingfile is triggered, the header needs to be reloaded, because only then can he pick up the attributes of the request.

  2. create a new portlet as HomePageLinks portlet. Its title property is not Visible and other properties of the UI as NoBorder, etc. NoTheme. The associated JSP will be the 3 links you mentioned fixed right. You can use css styles to make it right. Now dropping this portlet in the header Shell box. You have already HeaderPortlet in the upper part, lower than that, you will have this portlet HomePageLinks. Now associate a backup file for this Portlet show, only if the current active page of books is the home page comparing the label def etc. as mentioned above.

  In both scenarios, only concern is when clicked on different Pages, the entire portal is to be made directly from the header at the top. Only then the backup file will be set the key and the portlet HomePageLinks can show or hide as a result.

  Try to raise an event when the user clicks on the homepage. This port listening for that event can be HomePageLinks Portlet. I guess the event mechanism should work regardless of where the portlet is placed. In the event listner, see if you can show/hide this portlet.

  The only challenge is reloaded must section header whenever you click on a tab.

  Start putting a few files of backup and System.out.printlns to see if the header section gets recharged on, click on the tabs.

  These are just my thoughts on the top of my head. Other users of the forum may have better alternatives or a different version of the above approaches.

  Thank you
  Ravi Jegga

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• Need to print the header and footer randomly

  Hi all
  
  We spend our Actuate reports (install anti-capitalist seibel not operate) to BI Publisher
  Here's our situation. We try to water allowed printing for multiple clients in a single report.
  
  customer first permit can have 10 pages.
  Second customers permit can have 8 pages.
  and so on.
  Every customer will have variable number pages in their permit.
  First page of each permit must be printed with header/footer(letter head images), other pages on the white pages.
  
  If I print a permit at a time, it works very well. As I cannot select another first pagelayout page in rtf model and it works well.
  
  But our demand is to print multiple licenses at the same time in a single report.
  In this case, only the first page is printed on the letter head, rest of the pages are printed on white pages.
  Allowed to the customer so first print correctly, but the rest the client licenses are printed on white pages.
  
  But we need every permit first page should be at the top of the letter.
  
  I tried to use variables can be changed in the sections of header/footer to control the display of the header/footer, but unable to update in the header/footer sections. And it does not display anything, if I use the editable variables.
  for example in the header section:
  
  <? If: xdoxslt:get_variable($_XDOCTX,_'aSeqno') = '1'? >
  print the header image
  <? xdoxslt:set_variable($_XDOCTX,_'aSeqno',_'0')? >
  <? end if? >
  
  does not work in header.
  
  I appreciate all help.
  
  Thanks in advance
  Nag

  Use for-each@section for your group.
  Also use "Different first page" to have another front page.

• Misalignment of the heads - Officejet Pro 8500 has more e-all-in-one printer A910g

  Oops.  Typical message in subject line.  I'll try again.  I have an Officejet Pro 8500 has more e-all-in-one printer A910g.  I replaced my cartridges of ink three colors, and cannot print, print jobs are in the queue... and I get an error message on the display screen 'alignment failed.  Refer to the documentation for the device for more details. "Also, even though the level of ink Cyan poster now full on the screen, I get no blue on the print head alignment test document.  Help!

  I'm sorry that you are experiencing this issue. Sometimes, when you get this error message, maybe it's the ink or printhead may need to be cleaned.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c02207121

  Let me know if it helps. This isn't a software problem, you do not have to uninstall the software and things of this nature.

• Need driver for printer Canon BJC-210 for XP

  I have Windows XP, need a driver for a Canon BJC-210 printer.  It works very well, have the ink.  Driver got wiped out when entire disk had to be wiped clean to caused by a virus.

  Canon itself does not have one, and there are all kinds of scams out there to want not to download whatever it is not safe.
  This printer still works, ink lasts forever and able to get cartridges still easily.
  Do not want in the trash without no reason.

  The driver integrated in Windows XP does not work for you?

  What happens when you connect the printer to the computer?  Please provide error messages without paraphrase.

  Or try:

  • Connect the printer.
  • Cancel the Wizard "new hardware found" opens.
  • Click Start > printers and faxes > add printer
  • Select "local printer attached to this computer.
  • Uncheck "automatically detect and install my plug and play printer."
  • Select "Use the following port", and then select the appropriate port in the drop down list (see note below)
  • On the next screen, select Canon and BJC-210.
  • Complete the wizard.

  Note: Things can be difficult if the printer connects USB and there is not "virtual printer to USB port" in the drop-down list.  The simplest solution I've seen is to connect any generic USB printer.  After installation of Plug and Play, you can remove the printer but the USB virtual port will be there.

• In one of my firefox browser, the header/footer margin setup parameter is inches, I need to change it to milimeter to inches. Your help is appreciated.

  In one of my firefox browser, the header/footer margin setup parameter is inches, I need to change it to milimeter to inches. Your help is appreciated.

  As far as I KNOW Firefox displays the metric or Imperial depending on the type of paper selected for printing. If you are using A4, you should get millimeters/metric.

• After the upgrade to el capitan, cannot print Canon mp970

  Upgrade to El capitan in snow leopard, and now I can't print from my Canon mp970. I went to the site Web of Canon for a printer driver is compatible with the new operating system - found nothing. Found some threads on Apple support community and found a suggestion that recommended to download and install the Gutenprint (CUPS + Gutenprint v5.2.11 - simplified pre2) software. I did that and removed the driver from Canon, but still cannot print. The message I get from the printer is: 'you need to install the software to use this printer. " To install the software, choose App Store... from the Apple menu. If the software for your printer is not available in the App Store..., contact the manufacturer of your printer. »

  Any suggestions on what to try next?

  Hi Dellis46

  I met the same problem and tried several things before finding the solution for the print job. You must install the drivers 'old' Mountain Lion. They still do the job.

  Go to: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-833845&os=OS%20X%2010.8%20 (mountain % 20Lion) & language = EN

  Download the .dmg package and open it. Dubbel click .dmg package and follow the instructions. Connect your printer by a usb cable and turn on the printer. If not now, it won't work!

  Then, go to the apple/menu logo and choose Preferences system - open printers & scanners - click on the button "+" under and on the left side.

  If the printer is on and the installation of the finished, .dmg package you should be able to see in a new menu 'Add printer' one or more printers. Add one you need. If your mac is connected to the local network you will see a usb and printer of netwerk MP970 canon MP970 canon (network printer takes a while to appear), including its network address. Add the two printers and name them differently to avoid confusion.

  Now everything should work.

  It is for the printer. I can't understand how making the scanner works. Run the .dmg package for the scanner is not operate :-)

  If someone is tried: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio (mountain % 20Lion) nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-966569&os=OS%20X%2010.8%20 & language = EN

  I'd be more than grateful to the person who in fact occur...

  See you soon!

  Tjerri

• Printer Canon MG2100 device does not print the side of photography

  The only way that my Canon MG2100 will be printed is if I use the photo option. It will not print documents online or regular

  Hello

  Thanks for posting the request in the Microsoft community forum!
  I understand that you can not print properly on the computer. Before troubleshooting, provide us with information.

  1. which version of the operating system is installed on the computer?
  2. what happens when you try to print?
  3. you receive an error message?
  4. don't you make changes on the computer before the show?

  Try the printer troubleshooting steps:

  Method 1:
  You can try the link troubleshooting steps and check if you are able to print.
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:
  Perform a clean boot and check if it helps to print correctly.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  If the problem persists, feel free to let us know. It is our pleasure to be of service.

• How can I get the software of the printer Canon - MG6170?

  How can I get the software of the printer Canon - MG6170?

  I can't fing it in the Canon Web Site.

  Help, please!

  I can only find it on non-English language Canon websites such as Taiwan and Hong Kong. You may need to use an online translator to find the drivers you need (assuming that they exist for your version of Windows).

• Which current HP printers (Photosmart?) have removable print heads for cleaning?

  After my 6515 Photosmart suffered a premature death due to a clogged printhead black, I did a lot of research to know what to buy to replace.

  I looked at other brands, too, and unfortunately, there aren't has no easy answers anywhere.

  I feel that I am more familiar with HP, not to mention the offer of 564 papers of ink and photo that I always have on hand.

  Are there current Photosmart printers who have the leverage that allows you to easily remove the printhead to clean if it clog?

  I would really like to find that point, but so far, having this option is not in one of the specs I've seen.

  I would not be able to print photos, so it would be good if there is a Photosmart printer that this option was.

  Thanks for your help!

  Photosmart 7525 has removable heads, it is basically the same model as the Photosmart 7520 sold elsewhere.

• How to clean the head on DeskJet 1000

  Hello!

  I have a DeskJet 1000 printer. Sometimes I have vertical lines on the printed image (dirty head) but I can't find the head cleaning tool. How can I clean the head on this printer? I found nothing in the menus.

  I use Windows XP Professional.

  Thank you. I found the problem. carrtidge not loaded correctly.

• Need driver for printer Canon BJC - 210 Windows 7

  No further questions.

  Windows 7 will drive a printer Canon BJC-210 (have the CD). It does not appear in the downloaded list. Also with windows XP (my deskatop).

  Hi stlarry,

  You will need to contact Canon, because they are responsiblie for Windows 7 drivers for their devices.

  http://www.USA.Canon.com/consumer/controller?Act=SupportIndexAct

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• PSC950 entrelardée impression even after cleaning and alignment of the heads

  My impressions were strips of different colors, when I print in normal mode (or project).  My ink cartridges appear to be good and are 3/4 full.  I cleaned the heads and aligned with them, but the problem remains.  Are there any suggestions as to what I can do to remove the problem?

  Eskimo wrote:

  My impressions were strips of different colors, when I print in normal mode (or project).  My ink cartridges appear to be good and are 3/4 full.  I cleaned the heads and aligned with them, but the problem remains.  Are there any suggestions as to what I can do to remove the problem?

  This would usually be caused by a problem with the interconnection.  Try cleaning the 78 cartridge and printer contacts as shown here.