printer cartridge problem

I have HP Deskjet F4180 All in one, and I wonder if I'm number 54 hp black print cartridge.  I have 56 black in the moment and the computer will not print, it says check black cartridge, the cartridge is new. or he swap to # 54 black cartridge?

HP Suresupply site lists the #21 and #54 black compatible with Deskjet F4180 cartridges.  The black cartridge #56 is not listed as compatible.

Tags: HP Printers

Similar Questions

  • J4580 print cartridge problem: [Tri-Color] refer to the device Documentation

    Well, I'm starting to feel like I knew better, buy another HP printer after dismal luck with two all-in-one before.

    My J4580 already gives me headaches after only 6 or more months of use.

    The unit refuses to print, declaring "print cartridge problem: [Tri-Color] refer to device Documentation to troubleshoot."  Nothing in the help documentation.  The Habs is always 90% full.  Sometimes pulling the Habs and placing back in crazy wil it restarting.  When it restarts, it prints perfectly.

    I tried the ubiquitous "clean the contacts" and other instructions help generic that I saw, but those who were without help.  The "Solution Center (Yes, good)" appears and all ithas is a link to buy more ink (!).

    Someone has an idea?  I'm about to throw it through the window of stores office, given that I can't throw it out the window of HP.

    Thank you!

    Yes * I know * and I'm sorry that I forgot to come back here.  I had a major system crash and I had to reinstall a lot of drivers for my multimedia player, GPS, and printer (!).  As this occurs, the device did not return this error - touch wood.

  • HP Officejet 4500 print cartridge problem

    After you install the new black ink cartridge, error message came: 'print cartridge problem [Black]. Refer to the documentation for the device to get out of trouble. »

    I removed the cartridge and reinsert. Same message. Unplug the printer, then turn it off. When turned on again, the same message.

    Thank you, Jason, for your support.  Lesson: stick to what worked before, for example, 901 XL ink cartridge, as opposed to 901.

    Sidney

  • printer cartridge problem, 4780

    HP 4780 Photosmart printer range;  Mac 0SX Mountain Lion operating system

    Error message: cartridge Printrer problem

    I completed all the steps my 4780 contained in customer site HP, with the exception of "Avenue" that have no troubleshooting.  The message of screen printer one message I get is 'printer cartridge problem '.  How can I get the normal menu printer on the screen?  How the problem of the cartridge can be fixed?

    Don213

    Here is a link that can help you with the "cartridge problem.

    http://support.HP.com/us-en/document/c01675471

    Let me know if you have done these steps and the results.

  • Print error - "Print Cartridge problem. Refer to device documentation to troubleshoot. »

    Original title - device

    I changed the cartridges and the printer is now saying PRINT CARTRIDGE PROBLEM. REFER TO DEVICE DOCUMENTATION TO TROUBLESHOOT

    I did not have documentation, tried to solve the problems through my laptop but it cannot detact no problem.

    What should do?

    Seek assistance from the manufacturer of the printer.  They should have a copy of books online on the website of their support.

  • printer says "print cartridge problem (HP4600)."

    Changed the black ink cartridge, got the message "Print Cartridge problem".

    Has released the new cartridge, put in the old.
    Did the same thing.
    Put the new one back in.
    This isn't print the test sheet to help align printing.
    The printer is turned on.
    Check all cords, they are all correctly attached to both the PC and the printer.

    Q to help HP support pages or forums HP

    PC/Win is that the HP or their hardware drivers that allow

  • HP Photosmart C4780 printer cartridge problem

    The screen shows printer cartridge problem.  I cleaned the cartridge and it does not work so I replaced the cartridge with a new cartridge HP 60 and it still gives the same error print cartridge problem.  Help, please.

    A question for HP support, or their forums, its their device & software

  • 6310 printer cartridge problem

    With the help of HP cartrudges

    Started having light images

    Replace the black print cartridge

    Get message to replace the left cartridge

    Equip the new color cartridge

    Still got the message

    Pulled both cartridges

    clean the surfaces of the color cartridge and replaced

    Black Cartrudge had holes on both sides of the contacts, imk all gone

    Replace the black print cartridge

    Still got message to replace the left cartridge

    Message won't go away

    Have no option other than replce printer?

    Thanks for the comments.   Had done all this, had used the cartridge for a week or more.

    Due to the ink that elapse in what is below the cartridges (twice), I gave up the battle and suspended for another printer, HP, another, a HPIJ 6600 AIO.  A mMore cartridges to have problems with but well.  Thanks again for the feedback.    This a a GREAT source of help...

  • J4540 all in 1 print cartridge problem

    Solve the problem of ink cartridge (black) refer to the device display States documentationto - nothing is blocked.

    stop it, has released the plug, replaced the cartridge - any thoughts?-thank you.

    Hi Teresa813,

    Did you do any hardware changes or software on your computer before this problem?

    You can follow the steps in this link & check if it helps:

    j4540 all in one – "incompatible print cartridge".

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Reference: Troubleshoot aligning the print cartridge

    Hope the helps of information.

  • Re: printer cartridge problem

    Cartridge error problem. HP 7510

    After the purchase of the 4 pack replacement for 364 .and installation, I get the error "cartridge problem" as an error message.

    I subscribed and reinstalled several times and the same message. It was fine this morning before the replacements and all the cartridges are seated fine.

    I left out the small black cartridge (butterfly) on the left, why it does not work? If that's the case then this should be marked on the outer packaging.  Now a trip back to the supplier to buy more ink that I don't really need.

    Need help please, whenever I have change the ink it is in all ways a problem and errors

    All cartridges must be installed, the printer will not work without the installed cartrdige photo.

    The thin cartridge with the symbol of the bowtie is the cartrdige Photo.  There are a few lots having three colors and black, others have three colors and photo.

    See here for more information.

     
  • Print cartridge problem

    When I print, I get these pink stripes on every inch around the page on the right side of the paper.  I cleaned the roller at the back of the printer and the cartridge is new.

    Hi fb13,.

    By your post, I see that with the new toner, you get pink on each thumb around scratches in the page on the right side of the paper.
    I'll be happy to help you.

    Check if the drum unit for damage:

    1. remove the cartridge of toner product and check that the tape has been removed.
    2. check the memory chip for damage.
    3 examine the surface of the imaging drum on the bottom of the toner cartridge.

    CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

    His fingerprints on the imaging drum can cause print quality problems.

    4. If you see the scratches, fingerprints or other damage on the imaging drum, replace toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it.

    Print a few pages to see if the problem is resolved.

    Have you tried different paper. A bit of paper causes this.
    Use paper that is designed for use with laser printers. Don't use paper that is designed only for use with ink jet printers.
    Use paper that is not too rough. Generally using smooth paper translates into a better print quality.

    I have provided a document through the steps to see if it will solve this problem.

    Solving print quality problems.

    Make sure you do six/eight/nine/ten of Solution.

    Run a cleaning page through the printer. Just use regular paper.

    In the Windows notification area, right-click on the icon of the device settings, and then click the name of the product.

    NOTE: The Windows notification area is at the bottom right of your computer.

    Click the device settings tab, and then click cleaning Page.
    The cleaning process takes about two minutes.

    The cleaning page periodically stops during the cleaning process.

    Do not put off the printer until the cleaning process is completed.

    You need to repeat the cleaning process several times to clean the printer.

    What are the results of the report printing configuration? (stripes pink)

    What are the colors for the pink and in front of the pink squares squares, they are orange?

    What kind of paper do you use?

    Are you using genuine HP Toners?

    Please let me know the results.

    Thanks for posting on the HP Forums.
    Good day!

  • My printer is coming up with the error message "Print Cartridge problem".

    Just simply change the color cartridge, does anyone know how to reset the printer because I think it's a problem that will be fixed by the present, not sure.  The cartridge is a cartridge HP, so it cannot be that.  It is a HP Photosmart C4680.

    Hello

    What version of Windows are you using?
     
    You may have to contact HP for help because the problem is with the printer.
     
    For reference:
     
    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
     
    Hope this information helps.
  • "Print cartridge problem" with new black cartridges.

    For some reason, my printer reject print with this error all new cartridges. This printer is a HP Officejet 4500 G510g, and it's "901" ink that has the problem. I bought two cartridges of this type, new and apparently falsified with Wal-Mart. I tried to use both of them in the printer and it came with this error. Troubleshooting assistance, I can only find that I need to clean, I did then as directed. Yet none of them works. I don't know why, but they do not work. I don't want to erase Walmart on all of their ink cartridges to find a working one... Why am I having this problem? The printer do not error when I put the old cartridge back, so I don't really know where the shoe pinches.

    Apparently, my printer is out of warranty, which took end of February 2011, even if I bought this printer in September 2012. That in itself is meaningless, and I do not know where a party has to prove when I bought...

    I tried all of these steps, including the hard reset, and nothing has worked. But, I got a solution.

    Apparently, for some reason, cartridges, I had to come at Wal-Mart were not working and I went to Office Max instead bought one of there. Surely enough, it works beautifully. I don't really know why, but none of them worked at Walmart...

    It is not really of sense unless sold defective products from Walmart, but I know where to find ink cartridges in the future.

  • HP COLOR LASER JET CM1312 MFP: Print cartridge problems

    I loaded two cartridges with success, but with the third (CB541A - Cyan) I get the 'delete the shipping in the Cyan cartridge latch '. It IS deleted. I put the old cartridge and no problems, I tried again with the new and the same message appears. I tried to turn off the machine with the new cartridge in but nothing works.

    What should do?

    But not sure since the old one works, sounds like a faulty new cartridge. Consider a replacement.

  • European print cartridge problem

    I moved to Germany, taking my all-in - one Officjet 7410 with me. I ordered replacement black cartridges - according to the inscriptions, the European version is 339 - but the printer refuses to accept. Any suggestions? (and no, 'buy a new printer' is not what I want to hear)

    See you soon.

    You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

Maybe you are looking for

  • manually move the account to new computer

    I get an error after you move the profile folder content in a new machine. The error reads as follows:"Could not initialize component of application security. The most likely cause is problems with the files in the directory of the profile of your ap

  • Matthew *.

    Difficulty of system update < re-titled by host >

  • HP officejet 6600: HP Officejet 6600

    I have a new HP 6600 office jet all-in-one printer. I can't print in color... only in grayscale.  When the print screen is displayed, it is not an option to choose color printing.  It offers only shades of gray.  The HP that I used before that gave m

  • HP Pavilion notebook-17-f170nb (ENERGY STAR) (K1S08EA) SSD upgrade

    HP Pavilion notebook-17-f170nb (ENERGY STAR) (K1S08EA) Is it possible to add an additional SSD (2.5 inches, msata, m2) to this computer or is this not possible? I have to remove anything or not? I can't find it anywhere. At present, this type had a 1

  • Activation of Windows XP on a Dell Dimension 2400.

    Spent 3 hours transferred to numbers different media trying to activate my installation.  Due to a relocation after malware everything closed.  Until now, 2 emails to the support of windows (with no response that included pictures of my product key)