Printer disappears or redirects to remote users
After installing a new server running 2008, remote users have their printers either disappear or get redirected. This does not happen with all remote users, only a select few. I'm unable to remove them and I often have to reboot to reinstall their printer (without restarting their computer or the computer that the printer is connected, the printer is not found in the directory). How can this problem be solved?
Hi Ronigld,
Thanks for posting in the Microsoft Community.
According to the description, it looks like you are facing a problem with the printer on user remote desktop on Windows 2008 Server.
The question you posted would be better suited in the TechNet Forums; Since we have a dedicated server 2008 team, we would recommend posting your query in the TechNet Forums to get help:
http://TechNet.Microsoft.com/en-us/ms376608.aspx
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
Tags: Windows
Similar Questions
-
Application of the remote user
Hi guys,.
Do I have a chance to connect to the phone/ipad as a remote user/desktop? I need to connect an iPad to my family member and change the setting.
Thank you
I'm not aware of any way to do it on the iPad. There is an app that can interact with iOS itself, and as much as I know, there is none who can do right now.
~ Lyssa
-
Reconnect a remote user to the Volume Manager
I have a remote user who was gertting a license from my Volume Manager.
At the end of last week (when there was some network problems) it has been disconnected from the server, and now it seemed to reconnect.
It is now day 14 countdown (expiring Dec. 7), so he is anxious to get this resolved soon.
I tried to disconnect and reconnect the Volume Manager, but that did not help.
Clues?
TIA
Richard
James
We solved the problem by running 'vlmclient' on the remote machine, and this re-establsihed contact for the user.
I have to admit that after disconnection due to network problems, software to reconnect automatically to the VLM-, I would have expected but perhaps, it cannot differentiate between a manual disconnection and this situation.
Thanks a lot for your help.
Richard
-
To find the details of connection of the remote user to my computer
I want to know who is connected to my office using the Remote Desktop feature in Windows XP / Vista / windows &. is there a system where Windows saves the remote user connection logs
Hi Roger,
Remote Desktop connection is a technology that allows you to sit at a computer (sometimes called the client computer) and connect to a remote computer (called the host computer) in a different location.
If someone wants to connect to your computer, you need to enable remote desktop on the computer.
For more information, see the links.
Connect to another computer using Remote Desktop connection
Remote Desktop connection: frequently asked questions
If you suspect an infection of malicious software on your computer, see the link.
How to stimulate your defence of malware and protect your PC
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Event Viewer is a snap Microsoft Management Console (MMC) that allows you to browse and manage event logs. It is an indispensable tool for the operation of systems for monitoring and resolution of problems when they arise.
For more information, see the link.
http://TechNet.Microsoft.com/en-us/library/cc766042 (WS.10) .aspx
Please update us with the results and we will be happy to help you.
-
Add an account, leaving the remote user to choose the password
I need to let some (lan) users remote access to a folder. I discovered that, if her sweat and the password are the same of the remote account, vista doesn't do not ask credential and allow the user easily. I like it, but the remote user does not want to share with me their password for the pc, so I'm thinking how to add them elsewhere.
Sorry, but I would say to the remote user it does not work like that. You must be able to add name of account/password your on your computer. Maybe you must host this file on a type of DropBox site instead of on your local computer. MS - MVP - Elephant Boy computers - don't panic!
-
NAC Appliance with ASA (for remote user VPN)
I have a pair of firewall 5520 cisco which is used as a VPN gateway (for remote user VPN) and perimeter firewall Internet (to provide outbound internet connectivity).
We allow the NAC to remote VPN users. I have it will be deployed with active 3 layer inband.
The problem with this design is that how to ensure that outgoing internet traffic does not pass through the CASE?
I heard about couple of optioins:
-ACB (for send only IP subnet to VPN users remote to go through CASE)
-Version 8.x characteristic of ASA (Restrcit access to VLAN under Group Policy).
I intend to do with ASA firewall where I can set a new subinterface on the SAA (with a new tag VLAN) and under the group policy for remote user VPN, I select the option to "restrict access to the new VLAN.
My question is: is - it still works (even if the firewall have a route to the internal network by using the 'inside' interface and NOT the new interface of the NAC). If this does not work, please let me know what are the other options for this type of deployment.
Thanks in advance.
Hello
It should work. Please see the attached PDF for more clarity on this topic: https://supportforums.cisco.com/docs/DOC-9102
HTH,
Faisal
-
ASA5505 with 10 users. Need to connect 25 remote users with AnyConnect Client
Hello to everyone.
I ASA5505 with license 10 users. I need to connect 25 remote users via SSL VPN (in my case cisco Anyconnect client). So I have to buy the license more security (ASA5505-SEC-PL =) for more then 10 simultaneous VPN connections on Cisco ASA 5505. Fix?
And the main question. What I need to order the user getting up-to-date (for example ASA5505-SW-10-50 =, or ASA5505-SW-10-UL =) license for my device Cisco ASA5505 in order to have 25 connections of concurrent remote users without restriction for each remote user?
You need the license SecPlus for increased remote access users. But you don't need an extra user license if you still only up to 10 internal systems.
-
How can I send parameters preconfigured VPN client to a remote user
Dear all,
I have an ASA 5510 using VPN IP - SEC for remote users. I want to send all settings pre-configured for the VPN client.
How can I save the configuration file and send to a remote user?
Concerning
Configure the vpn profile in your vpn client, and then send them the .pcf file located in the directory Program Files/Cisco Systems VPN/customer/profiles. Then all they have to do is import it into their client.
-
remote users access site ipsec tunnel
How to configure the ACL and the road to allow remote users access to site ipsec as local users?
Current scenario is
1. distance users (192.168.2.0/24) ipsec <->Cisco 870 (192.168.0.0/24)
(2 cisco 870(192.168.0.0/24) ipsec tunnel <->cisco 1811 (10.0.0.0/24)
Now remote users can access the 192.168.0.0 network, no problem, but how they can access 10.0.0.0 network?
I guess I can do like this:
1. in cisco 870, site to site ip 192.168.0.0 tunnel allow 0.0.0.255 10.0.0.0 0.0.0.255
(add) permit ip 192.168.2.0 0.0.0.255 10.0.0.0 0.0.0.255
2. in the site-to-site vpn cisco 1811
(add) permit ip 10.0.0.0 0.0.0.255 192.168.2.0 0.0.0.255
3. in settings vpn split cisco870 add the 10.0.0.0/24 network
Is this fair?
Thank you.
You must configure the interesting traffic that an ACL contains the source is remote destination as local LAN and LAN.
->-> -
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Windows 7 Home Premium - default printer disappears and need to reinstall
I use Windows 7 HomePremium and have a HP OfficeJet Pro 8500. Regularly, sometimes daily, the printer disappears from devices and printers. Only the printer devices disappears. The fax device is still there. I have to completely reinstall the printer from scratch. Windows 7 is pre-installed - this isn't an upgrade of Windows 7. The event viewer shows that the default printer is passed to the OfficeJet to MS one Note (I have MS Office 2010 installed, but this is also a problem with MS Office 2007). At this point, the device for the OfficeJet disappeared from the list of devices and printers. The loss of the unit of the printer seems to happen randomly. I hope someone can help. I've seen other assignments of the loss of a printer, but I found no solution.
Hi bob,
I suggest you run the scrubber to the HP website driver and check if there are conflicts in the drivers. The link to the raccoon driver is:
After you run the scrubber to the HP website drivers, you can try to uninstall and reinstall the drivers for your printer and check if it helps you to solve the problem.
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
AnyConnect 3.1.04072 allows remote users
I find no establishment of VPN Windows with "Allow remote users" in the profile editor. Is it discouraged?
Pavlo,
Could be a limitation of the profile editor you are using (stand-alone or ASDM?)
The value exists in VPN XML reference:
and his retirement to my knowledge.
M.
-
original title: change of user?
I have Windows 7 Starter and watched a video and my Internet Explorer froze, so I forced stop. Now my USER profile has disappeared, replaced by a generic user with access to NOTHING profile. I can find my user profile on the COMPUTER, but I can't switch back to my own USER profile (not "switch user" on the closure.) Can anyone help?
Hello
As the Group Policy Editor is not available in the Home Premium version and the version of Windows 7 starter, the other way to disable is through the registry editor.
Important: this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
1) click Start, type regedit.exe in the find dialog box or run and press enter.
(2) go to HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------system
(3) create a DWORD (32-bit) value named HideFastUserSwitching with a right click on the right side of the editor and choice New > DWORD(32bit) value.
(4) set data HideFastUserSwitching to 0 to disable the fast user switching.
(5) in the future if you want to enable the fast user switching, set data HideFastUserSwitchingto 1.
After, log to see the changes. Fast user switching must be disabled after completing the steps above.
-
DB link without remote user password
Hi gurus,
I am creating a db_link from one database to others for a specific user. But I won't have the password for the remote user.
I tried by method of hash values that allowed me to create the db link but while accessing data, I ORA-00600: [see Err Kzdlk_zt2] and according to the values of the hash for the 456320.1 id method will not work.
Is there any other method to create a db_link without knowing the name of user and password remote.
Help, please.
We had the same problem g 11, that Oracle accounts created in the past and no one remembers the password. Not only that, but these applications that connect to the database also have the encrypted passwords.
We also had to create links to the database between databases, and of course 'IDENTIFIED BY VALUES' has failed.
Therefore, the solution was to create new accounts on the db target to be exclusively used for db links and provide these accounts with the necessary privileges to access the data.
I recommend using KeePass Password Safe to build your repositories of passwords and avoid this problem in the future.
Good luck!
-
How can I download my website to work with a remote user folder?
Hey, I've been as succinct as I could be!
How to transfer the folder that contains the Web site of my Muse so that both of us can change the files?
I know how to download a "file." I want to download a 'folder '.
Thanks for your time people
GarthmanHi Garthman,
You can create a folder in your folder to create Cloud Files containing your Muse site which can be worked with a remote user.
Please follow it below help document:
Using creative cloud | Collaborate by sharing folders
Kind regards
Akshay
Maybe you are looking for
-
HP 15-r030wm: reset the BIOS password
We cannot remember the BIOS password that we set to our laptop, since we have not used in a while. I'm just looking for a reset help or remove The code that you get when not 3 times is77485897
-
Powers of the detonators off the coast during the removal of the song on the player
When I delete a song on the external mem drive. or internal mem. rocket freezes with delete song on screen for about a minute, and then the screen turns off. When I turn on the back database is updated. Anyone else having this problem. Started after
-
when im on it that I can navigate about everything, but when I try to click on the logout button, nothing happens. and on facebook, it won't let me click on some things including loging on
-
HP Deskjet 1010 is stuck to remove
My new HP Deskjet printer is stuck in the remove mode. Does not print. Even if I try to erase Quebec by canceling all print jobs, it remains blocked to remove. I've erased successfully two times and then tried to print something and he went immediate
-
BlackBerry smartphones reducing the contact info in the address book of 2 lines to 1
Hello It's my first posting in the forum and I would like to know if there is a way to reducung the number of rows that appear in the address book for a contact. On my curve 8330 OS 4.3 is the double line, contact name is on one line and the company