Printer does not print after installing new ink cartridges

Similar Questions

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• Cannot access the printer software after installing new ink cartridge

  I installed new ink cartridges. It prints well but I can't access the printer on the computer action tab. I can't check ink levels, align the pages or check on maintenance. When I click on the folder of the printer it opens but it says it's searching for items. The printer of action file is not there. Anyone know what could cause this? I can't open the Toolbox of the product. What I have to reinstall the printer software, or is there something else I can do to fix this. I have windows 7 and a 3000 deskjet printer. Thank you.

  Harold R. Rodgard

  Hello Harold,.

  The question most likley do not have much to do with the replacement of the ink cartridge.

  Lately, HP has released a new software, due to the latest MS updates, you must update the software to get all the features.

  Go to start > programs > HP > select your printer folder and follow uninstall them.

  Now, download and install the new version of the software from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DJ-109022-2&cc=us&DLC=en&LC=en&OS=4062&product=4066429&sw_lang=

  Shlomi

• Printer does not print in color after installing new ink cartridge

  I have a HP Photosmart C7280 all-in-one printer.   Windows 7 is my OS.  I have made no other changes to my computer before this problem.

  My problem:

  I installed a genuine HP brand new yellow ink cartridge in my computer because my other cartridge was empty.  After that I installed a new cartridge, my printer normally goes through an initialization process.  This time he did that.  Now when I try to print anything in color, I get a window that says "ink empty Casrtridges.   To print in color, install the following cartridges: yellow "then turns and she says in that it can only print in black."

  I did a Test print.  I ran "clean cartridges".  I did a 'print align.   All these prints in color, including the yellow.  I also did a color copy and printed the color yellow.   Ink level shows the yellow as a FULL cartridge.

  I have tried with 3 new genuine HP yellow ink cartridges and it still doesn't let me do a color print.  I have rebooted my system, unplugged the printer several times and it still will not print color.

  What else could be my problem?  What else can I try?

  Thanks for any help anyone can give me.

  Carol

  It seems that the error got stuck in the printer driver. Try to uninstall and reinstall the printer software. That should clear up the problem. I'll link the latest software and drivers below. Let me know what happens.

  Uninstalling the printer software

  Installation of the software of the printer in Windows 7 for a USB cable connection

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

  HP Photosmart full feature software and drivers

• Could not print black after installing new ink cartridge

  I installed the new black cartridge on my deskjet 3520. This is the original hp ink cartridge.

  also reinstalled the software of hp deskject.

  It shows even good condition here.

  but just no matter if I try to copy/printing, the printer started working and looks like it's actually printing, but after he gives me a blank page.

  

  Please can you me what should I do?

  

  Hi @Laviniania,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cannot print in black ink, you tried an alignment without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• Computer does not start after installing new graphics card

  HP-envy h8-1503
  I7 - 3770 k 3.5 GHZ
  10 GB of Ram
  Windows 8.1
  
  I tried to install a new edition of diamond Raedon 7770 to replace my old 7570 and when I try to start the computer I get 6 long beeps and the power light flashes 6 times. Everything is plugged in right and the video card turns on. It will not be output to the screen tho and the computer does not start!

  I fixed it, the problem was the safe boot in my bios, when I disabled the system booted and worked perfectly since! Thanks for the advice tho!

• Sound does not work after installing new wireless keyboard and mouse

  I have windows xp Media Center installed the new logitech wireless keyboard and mouse, and now my sound does not work. The speaker light is on, the Device Manager does not show a conflict and said that everything works well, but still no sound. A friend has just installed a new microsoft wireless keyboard and mouse and is having the same problem so I know that's not new equipment. Does anyone else have this problem?

  Hi Red_t,

  Welcome to Microsoft Vista answers Forum!

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP Media Center and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.

  Windows XP Media Center edition Discussions - http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windows.mediacenter&lang=en&cr=US

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Does not start after installing new video card

  Hello, I have a desktop H8-1284, and the video card went a few days ago. So I bought a video card Geforce GTX 650, and after installing the card and the computer starts, it hangs just at the start of the HP logo screen. So I put an old geforce 8800, and she starts without a problem. When I try the new card Geforce GTX 650, the same thing, just hangs at the splash screen.  I checked the bios and it doent seem to be something there that can help wouild. My diet is 460 w, and the new map needs of 400 w, any help will be greatly appreciated

  Hello

  Most of the cards PCI-E 3.0 are retro-compatible with the PCI-E 2.0 slots.  However, in order to get the PCI-E version 3, you must use a processor Ivy Bridge.  Look at these specificationsfor a typical NVIDIA GTX 650.

• Error ink system Oxc19a0042 after installing new ink cartridges 564 in Photosmart B209a

  After installing real 564 HP cartridges in a printer Photosmart B209a, screen reads incompatible cartridges, and the printer went to err Oxc19a0042 ink system. Have you tried to unplug it, put the old cartridges, etc. and yet cancel the error and print. It's unused cartridges HP 564. Why are they incompatible and what can I do to solve the problem?

  This document on the 0 x.rror can help:

  http://support.HP.com/us-en/document/c03081973

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My safari does not work after installing iOS 9.3

  My safari does not work after installing iOS 9.3

  This is a known issues with 9.3 and Safari (with the mail application and other applications)

  Some have reported success goes in the settings, safari, advanced and Disabling Javascript. Others said that Opera browser works, so you can use it as a workaround until a patch is issued. There is no indication how long can take this difficulty. Maybe in a few hours, could be days.

  or you just have to wait it out.

• Installed new ink cartridges in printer V105 led, error "unsupported cartridge. Install a correct ink cartridge"

  I installed two new on my printer V105 Del compatible ink cartridges. When I try to print a document it is a box saying ' unsupported cartridge. Install a correct ink cartridge "what can I do to make it print using compatible cartridges?

  Hello

  The first thing that you want to make sure of is that, in fact, having the right cartridge for this printer. If you are sure that the cartridge is compatible, I'd go to the Dell site and download the latest drivers directly on the site.

  I hope this helps. Just reply to the results.

• OfficeJet Pro 6830: Installed new ink cartridges on 6830, but they were not full

  I've been using this printer for about two years now, been through "Print head problem" for both, they exchanged once and replace only the part once.

  My ink colour C, M and there were emptied at the same time, so I ordered all three in an online store. I installed a few minutes ago and check the ink level via the touch screen of the printer. It turns out that they are not quite complete. They are almost full, C and are close to full, but M is less complete.

  I wonder why this happens? I never checked the ink level in the past, but it surprises me. The printer makes some kind of calibration and printhead cleaning to get ready installed ink? (So consumed little ink)

  I scanned the QR code on the side of boxes of ink and checked the hologram stickers and pretty sure that they are genuine. The printer also said that they are authentic.

  Here is the picture of my ink level. Shot after installation of the cartridge and nothing printed.

  

  Another strange thing is the date of installation. Now it is April 4 in my country but the web printer configuration page shows cartridge installation date is April 1! I checked the date and the printer and everything is OK.

  If the cartridges have been used before, the printer screen would show a message that cartridges have been used on another front printer. I saw only me because I kept the old ink before trading in the past as I said up there.

  Please see a screenshot below

  

  Everyone knows what happened? Or it's normal? (The packaging and seal in plastic cartridges seemed fine, nothing suspected weird)

  Thank you.

  Welcome to the HP Forums

  @BlackMiracle,

  I came across your post about the concerns that you have with the help of your new ink cartridges and I wanted to share my own suggestions. The date being out for a few days is a bit strange, but the rest seems normal. Yes, when you install the cartridges, they are calibrated and alignment and clean, that uses a bit of ink. The levels that you see are also "estimated" levels If there are print quality problems or error messages, let me know and I'll do my best to help.
  
  I hope this helps!

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller