printer driver will not install in windows xp

Similar Questions

• My HP Photosmart C309g printer driver will not install on my laptop.

  I am running Windows 7 64 bit. When I try to install the driver for my printer C309g (pilot of the basic functionality or complete) installation hangs during the first phase. Actually, the installation closes and disappears without any error message or explanation. When I tried to use the installation of HP software, he kept just the driver download and try to install it again and again.

  I tried the fixes on this site: http://support.hp.com/us-en/document/c00836418 I turned off finish it and stay programs and disabled the firewall.

  The most frustrating is that the computer can print a test page for the HP diagnostic tool and other computers and my iPad will be printed (using eprint on the iPad), but I really need THIS computer to print.

  Hello klucot.

  During the first phases of installation, there are a screen that allows you to configure your Internet options, which allows you to choose if you want to find the driver updates before you install the driver or not. Select that you do not want to search for updates and installation will pass.

  See you soon!

• I have a kodak esp6150 printer, try to install on an asus laptop k601j running windows 7. driver will not install keeps giving an error.

  driver will not install keeps giving an error.  Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer.  installs fine on other computers in the House. for any help or suggestion would be appreciated.

  Try to download and install the latest drivers for Kodak for the ESP 6150:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

  Troubleshooting of the printer:

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB 3.0 AMD host controller driver will not install.

  The USB 3.0 AMD host controller driver will not install.  He would then set I uninstalled assuming that Windows would be updated and reinstall.  Now it will not reinstall.

  Any ideas?

  Hi Felix,.
  Thanks for the reply.

   
  Have you tried the methods suggested earlier?
   
  Refer to issues related to the printer:
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Download and install the latest drivers for your printer from the manufacturer's website.
  http://support.Lexmark.com/index?page=answers&startover=y&locale=en&UserLocale=en_US&question=Lexmark+S410#2
   
  I hope this helps.

• HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista

  HP Deskjet 1056 will not install on Windows Vista

  Hello

  Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&

• DeskJet F2110 will not install in Windows 7.

  My F2110, all-in-One, will not install in Windows 7.  Error message says will not be installed with the current operating system. I switched from Windows XP to win7, now my installation disc will not load in win7. The F2110 won't work with Win7 or Win8, only older operating systems?

  Hello, welcome to the Forums! I hope you enjoy your experience

  I saw your post on the question of facilities that you are experiencing with the use of the disc. There are downloadable drivers available for Windows 7 and Windows 8. The link is below for you!

  HP Deskjet F2110 all-in-one printer drivers

  I hope that this post has helped you!

  Thanks for posting and have a great day!

• MSM7x27 (Samsung GT-S5830) driver is not installed on windows 8

  I have recently upgraded to windows 8 (64-bit) on my computer... Maybe it's a bad blow but anyway...

  As the title suggests, the drivers of my Samsung GT-S5830 work well with windows 8... the MSM7x27 driver is not installed by windows 8... Unlike windows 7 (64-bit), it is automatically installed on it... even without the driver installation files. I even tried to install the driver files in windows 8, but no luck, instead of MSM7x27 as the name of the driver, it will show unknown device... and yet windows does not detect my phone
  PS. Windows doesn't detect my phone when it is in download mode (Android)
  Hardware ID:
  USB\VID_04E8 & PID_6601 & REV_0100
  USB\VID_04E8 & PID_6601

  wait!, I found the driver here: http://downloadcenter.samsung.com/content/SW/201306/20130610184736640/SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.25.0-retail.exe

• Vodaphone VMB Lite will not install on Windows 8 Pro clean install

  Vodafone Dongle (Huawei K3770) advertising software. NetFramework 3.5 (versions 2 & 3 inc) must be installed via the internet - download 3.5 full version via Windows 7 will not install on Windows 8 Pro - tick Windows 8 Pro add features to install also calls to access the Internet - this own is almost useless without internet access and must be considered incompatible with Vodaphone Dongles and combination of dual-boot.

  The upgrade on Windows 7 H & P (providing 7 is fully updated) works ok but degrades to the operating speed of the Hp Pavilion dv7 3111ea

  Hi, I have activated. NETFramework 3.5 as explained above. The driver of the Vodafone Dongle loaded but when I connect, the PC gives the following error message and reboot: bad_pool_caller

  What can I do?

• KB976569 will not install in Windows xp, error OX66A HELP

  KB976569 will not install in Windows xp, error OX66A HELP

  Rick

  Hello

  Follow the instructions in the link:

  Codes error '0x8007066A' or '66' was to occur when you install updates of .NET Framework

  http://support.Microsoft.com/kb/2507641/en-us

  I hope this helps.

• Try to reinstall the printer and will not install due to not having Admin rights

  original title: Instalation printer

  Try to reinstall the printer and will not install due to not having Admin rights. I am the administrator,

  How can I continue?

  Thank you

  Right click on the printer software setup.exe, etc > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Trust keyboard and aula befire keyboard elight will not install on windows 7 help

  TRUST KEYBOARD ELIGHT AND AULA BEFIRE ARE TWO PLUG-AND-PLAY BUT WILL NOT INSTALL ON WINDOWS 7

  Hello

  1. do you receive an error message or error code?

  2 have you made changes on the computer before this problem?

  3 is the issue limited only when connecting keyboards?

  This problem may occur because of drivers are not installed properly.

  Try the following and see if it helps.

  Method 1:

  Try connecting to another USB port and check if it is detected, or try to connect to another computer.

  Method 2:

  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us Note: I recommend to install the drivers for the keyboard and check if it helps.

  Method 3:

  Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Keep us updated on the status of the issue.

• Works Suite 2003 will not install on windows 7. compatibility issue?

  Original title: Works Suite 2003 will not install on windows 7. compatibility issue? If so how to solve it.

  I tried to install Works Suite 2003 on my laptop using Windows 7, 64 bit. He has a problem loading and wants to perform a clean boot. The boot minimal instructions do not apply to windows 7, so how can I get this Microsoft program on this computer running a Microsoft OS?

  Hello

  ·        Which edition of Windows 7 you are using?

  Works Suite 2003 is not compatible with Windows 7. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=works%20Suite%202003%20&OS=64-bit

  You can try the byAndre.Ziegler suggested in his previous post suggestions, but note that XP mode will only work if you have Windows 7 Professional / Enterprise / ultimate.

  Apart from this, you can install the program in compatibility mode and check if it works or not.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  See the article mentioned below for the minimum system requirements for the continuation of the work 2003.

  Works Suite 2003: Minimum system requirements for the Installation of Works Suite 2003

  http://support.Microsoft.com/kb/331105

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CS3 will not install with windows 10

  I can't install CS3 will not install with windows 10 pdf dll file missing

  Use compatibility mode.

• 6 Lightroom will not install on Windows 7 or 10.  Error message is not Vista compatible.

  6 Lightroom will not install on Windows 7 or 10 on new Dell computer.  Error message is not Vista compatible.

  Settle in the right forum.