Printer Epson LQ-590, 32-bit and 64-bit

Similar Questions

• Incompatibility of printer Epson LQ-680 with Windows 7, 64-bit operating system

  Incompatibility of the printer Epson LQ-680

  I got a new machine (with Windows 7, 64-bit operating system).

  Earlier I had been using an Epson LQ-680 with a serial cable.

  The new machine has a USB port, so I have to use a USB to PS/2 port.

  I installed the Energon USB but still cannot print.

  Incompatibility of the printer Epson LQ-680

  I got a new machine (with Windows 7, 64-bit operating system).

  Earlier I had been using an Epson LQ-680 with a serial cable.

  The new machine has a USB port, so I have to use a USB to PS/2 port.

  I installed the Energon USB but still cannot print.

  I read your post with a lot of attention. There seems to be some confusion on your part. I want to arrempt in order to clarify the information so that a good solution might be found for your needs.

  The Epson LQ-680 is a matrix printer with a print head 24 pins. It is designed to use a parallel port. This means that its computer interface conforms to the IEEE 1284 specification. This is often referred to as a Centronics parallel port. Series No.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=14331&infoType=overview

  Thus, because your computer does not have a port for a direct connection, you must use a parallel to USB device.

  Not all of these devices are supported printers. Please check the specifications of the device that you use to connect your USB printer and confirm that it supports the printers. It is preferable that it supports bidirectional printing through the device. If it is not the case, getting the arrangements put in place for this printer could be a problem.

  Driver for printer:

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=14331&prodoid=61441&infoType=downloads&detected=Yes&platform=OSF_W_7-64

  =================

  You did not mention whether your machine is a laptop or computer desk/workstration. If the latter, and if she will allow to install PCI cards or PCI-E, install a parallel port card would work more simply.

  If you want other help, please let us know the make and model of the parallel to USB device.

• Need driver of device and/or software for my printer Epson Stylus NX420

  I have misplaced my original software for my Epson Stylus NX420 printer and have so far not been able to locate online. Very frustrating, in fact, as I just replaced ink cart., etc..

  I had printer for a while, because it was installed on an older device and was very satisfied with its performance.

  Please let know us, as I am at a loss to know what to do.

  Thanksmuch in advance and appreciate your support.

  Rob Ralston

  Hello

  You download your Epson drivers.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes&OID=151211&infoType=downloads

  All-in-one printer, Epson Stylus NX420

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=151211

  See you soon.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why my computer (HP Pavilion p6709c) takes 7 to 8 minutes, if at all to talk to my printer (Epson Artisan 835), or not at all. Technical support HP, Epson and Verizon FIOS technical support are baffled.

  Why my computer (HP Pavilion p6709c) lasts 7-8 minutes to talk to my printer (Epson Artisan 835), or not at all.

  HP, Epson and verizon tech supports have not set in 4 months.

  Hello

  1. what operating system do you use?

  2. do you get an error message when you try to communicate with the printer?

  If you use Windows 7, try to run the printer Troubleshooter and check that if it helps, here are the steps:
  Method 1:

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under hardware and sound, click use a printer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  I suggest that you installed the latest drivers of printer and check.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=156708&prodoid=63087901&infoType=downloads&platform=all

  Method 3:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also contact the support site of Epson to known technical issues.

  http://www.Epson.co.uk/contact-us

• I can't get anything to print even after the installation of the new CD of the printer and it says ready but does not print. Printer EPSON Stylus NX400 computer desk is Dell.

  Cannot get from my Dell printer.  I hooked but searching the Web for the installation of the printer comes with nothing.

  Hi Velma Brown,

  I see that you can not print. I'll help you with this problem.

  1. What is the model number of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the exact error you get when you try to print?

  You can download the drivers for the printer Epson here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=106004&infoType=Downloads&platform=OSF_W_XP-32

  I suggest you to refer to this article and check if that helps.

  Resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

  Refer.

  Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab4

  I hope this helps.

• Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing

  Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing

  This looks like a printhead clogged for me.
  It's more of an Epson problem than a problem of Windows.
  Check the Web site of the Epsom for utilities seeking to lead the printheads.

  Here is a link to the CX6600 troubleshooting page:
  <>http://www.Epson.com/cgi-bin/store/support/erscripts/start_er.jsp?BV_UseBVCookie=Yes&OID=41664 >

  HTH,
  JW

• Sharing a Kodak printer between win 7 64 bit and vista 32 bit

  I have a kodak esp 3 printer connected to a vista 32 bit desktop pc. I share this printer on a wireless network in my house. I try to print from a laptop 64-bit windows 7, but failed to add this network printer to the computer windows 7. I think all I need are the x 64 drivers and add them via the systems vista printer properties.

  We now print by saving the document in the "Shared Documents" folder of mobile access and then print from the vista machine.

  After three long chat, phone and e-mail conversations with the technical support of kodak, what they say is this printer can't print wireless.

  They do not understand, it is a shared network printer, and I'm not trying to print directly to the printer via wi - fi, because I know that that does not support this printer.

  Any help, advice or where I could get a kodak 64 bit print driver would thank you very much

  
  

  Hi, I had not checked on this for a while, I couldn't get anywhere with x 64 drivers for Kodak for us would simply send documents on the Vista desktop, and then print them. So finally last night I upgraded the Office to Win 7, the upgrade price on Amazon is great-now $89, all problems are solved, put in place a homegroup print, share files and listen to music and video. Big difference in the performance of old desktop of 3 years. I should have done this 6 months he is a. sorry I have no solution to the original problem. Thanks - Matt

• Epson Workforce 345 while a printer does not print. message that the local print spooler service is not available and I need to restart the spooler.

  All of a sudden my Epson Workforce 345 all-in-one printer will not print.  I get a message that the local print spooler service is not available and I need to restart the spooler.  What does that mean?

  Hello

  Check with the manufacturer of the printer for updated drivers, support and Forums for
  known issues.

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  If there is that no Windows 7 drivers try the Vista drivers if those that exist.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  ===============================

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with your support and the Forums printer manufacturer.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - devices and printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out

  I have a printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out. I can't find the ink level monitor. Can you help me?

  If all else fails, read the user guide:

  http://files.support.Epson.com/htmldocs/sc88p_/sc88p_ug/wwhelp/wwhimpl/js/html/wwhelp.htm

• My Lr5.7.1 does not recognize my printer Epson XP-760 and after customize printing in the print Module, printing options (lower right AND Main Menu &gt; Archive &gt; print) are disabled

  I am running Lr5.7.1 on an iMac, retina 5K (OS X Yosemite 10.10.1).) My printer (Epson XP-760) works fine with all other applications, but not with Lr! After choosing my printing preferences in the print Module, it works if I select print file and save it to the desktop and then return to preview and print from there. This is not what I want. I expect that the print button (bottom-right) should be disabled and not disabled and send to the printer directly from in the Lr print Module. It doesn't matter if the printer is turned on Wi - Fi or USB (or even both).

  What is the problem? What else can you or should I do to make it work as I hope?

  Gunnar

  My Swedish is not good, but I think that you print on file. Did you try chaning where it says JPEG it changed printer?

  You might also on 5.7. On Lr if you go to the Help\System of information, what is the version number? If she is 5.7, you're not on 5.7.1. Yo can still update manually, go to Adobe - Lightroom: for Macintosh: Adobe Photoshop Lightroom 5.7.1, download the dmg and install.

• Settings for Epson printer does not not in LR and EP 12, blocks programs when I click.

  4.4 LR and EP 12, after I put all my info of color management in Control Panel printing of the program for the Epson printer and the correct book, I go to Page layout, select the paper size and printer, then the settings of the printer, select the printer, and then try to select the paper source, nothing happens and then attempt to select paper, and then planting programs.

  My problem is now solved.  I got with the help of Epson.  We had to remove the printer from printers/scanners in the Preferences of the iMac HD section after disconnecting the usb cable. Then, we went to the utility disk in the Applications folder and performed a repair disk.  After that we have connected the printer, rebooted, open ss12/LR4.4 and, voila, the source type and media paper now contained the appropriate information.  Something was wrong with my system, one of these mysteries.

• Tried everything - Vista still does not recognize printer Epson!

  I have Vista Home Premium 32-bit. I spent HOURS trying to get my printer Epson CX7800 installed. I get the error unknown device and after trying to install the printer software, the message that the device is not working properly. The CX7800 is compatible with Vista. I have checked/tried this following:

  1. Installed updates for Vista.
  2. Tried to install the drivers updated from the Epson site. Installation cannot recognize that the printer is plugged in and turned on and closed unexpectedly.
  3. Troubleshooted on the Epson site. Followed their advice to uninstall/reinstall to the letter.
  4. Verified the printer on other computers running XP - works fine.
  5. I tried changing USB ports - all ports are good.
  6. FixIt ran from the Microsoft site - no problems found.
  7. Tried the Add Assistant printer - who cannot find drivers - even if I click on disc then point it on where are the downloaded drivers.
  8. Troubleshooted on the Dell site - have a desktop Dimension E521 - no luck.
  9. He spent hours searching for technical advice and do not yet have a solution that works.

  Any help for that to be resolved would be LARGELY APPRECIATED. It's a question of Vista - not a problem with the printer or the computer. Argh!

  I can't believe how easy the solution was... amazing that this simple solution has been so difficult to dig for!

  All I had to do was go to the Device Manager and disable the PCI Standard improved to the USB host controller.

  That's all! Turned on my printer and installed the software and I printed a page within 3 minutes!

  How frustrating that it took me more than 30 hours to get this simple solution. But I hope that it can save someone else from countless hours and frustration.

  I found the answer on CNET: http://forums.cnet.com/7723-12546_102-215320.html

• "Windows can't open add printer." Access denied error message. "When I want to add a printer for win 7 64 bit OS &#62; see details below

  I can't reinstall my printer Epson WiFi is on my network. I recently installed a "update package" published on 11/04/2011 Epson. I have a HP Pavilion laptop g7 with windows 7 64-bit OS. I can't go back to "System Restore" to the date of my installation of update. I have an another HP laptop also on the network, and he has no problem printing. I reinstalled the Epson printer so I can print a page of the Epson, but windows does not recognize the drivers I am not able to print anything else. I can not add the same "a Note" as my printer because of the error message "Access denied" mentioned above. I have tried to install using the disc to Epson, and then after uninstalling all things Epson I installed on the Epson site. Note: I'm on the same network "workgroup" as the other laptop, however, when I go to my computer > network it shows 2 laptops, devices, multifunction, Network Infrastructure devices, printers and Scanners. The only difference between the 2 laptops in this area is that mine shows 'Gateway Internet' in the 'Network Infrastructure' and the other laptop shows router WiFi. Any suggestion would be appreciated.

  Thank you. dlholling

  Hello.

  Try to Foillow the steps...

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/thread/d0e13543-30fb-41bf-ba5c-8c2db34f3023

  This will help.

  Thank you

• Cannot print to a network printer after Windows 7 64 bit upgrade

  I've recently updated one of my new PC from Vista Home Premium 64-bit of Windows 7 Home Premium 64-bit.
  Since then, I not was able to print on my network printer, an HP Photosmart C7180 all-in-one, which is wireless on my home network. When this PC is Vista, I was able to print. Two other computers on my home network, both running XP, can access the printer on the network and printing.  This PC now on Windows 7 64-bit can find the network printer when I "Add a printer -" and I am able to complete the installation of the printer.  I downloaded and installed new drivers for the HP C7180 from the site Web HP specifically for Windows 7 64-bit, so I have the latest drivers.
  I have NOT install the printer as a device shared on any of the computers, but rather want to be able to print from any of them, even if other computers are offline.
  If I open and leave visible the print queue for the printer and then print a Test Page, I see the print job briefly showed the 'Impression' in the display of the print queue, but nothing ever reachs the printer. There is no message error, either during the process of adding the printer, or when sending the Test Pages, or other print jobs to the printer.
  I have McAfee antivirus and firewall installed on my PC. Advanced Firewall setting for networks shows that the range of IP addresses for all my IP addresses are approved.
  (I spent hours to reinstall the drivers and remove and reinstall the printer and spent a frustrating 2 additional hours with the help of HP without success. Any suggestions would be most appreciated.)

  Is your computer 7 32 or 64-bit?

  Go to the HP website and download the Windows XP driver for 32-bit or 64-bit (depends on the version you have)

  Right click on computer

  Click on manage the

  go to Device Manager

  right click on your device unknow (HP printer)

  Click on set to update driver

  Locate the *.inf you downloaded Epson (32 or 64-bit)

  Install the WinXP inf driver