Printer feeds a blank sheet with each printed page only with HP Envy and Windows 8

Similar Questions

• OfficeJet J6480 continue to feed the blank sheets after the last page of the print document then blocks.

  When you print a document on my OfficeJet J6480, once the last page printed, the cradle of the cartridge moves back several times, then one or two white sheets feed through the printer. Sheets then another feeds and jams, requiring the duplexer to be deleted to clear the jam. This happens on 95% of the print jobs sent to the printer.

  Windows XP SP3

  Unfortunately, the troubleshooting steps a false paper jam and find a real fundamentally the same.
  I included a link to a document that is for a paper jam error. However, I'm sure you did 1st two solutions and if you please go above them, I want you to try, is the cleaning of the rollers and the duplexer and reset the products and checking the firmware to ensure that it is up-to-date. These solutions are listed in the order and you can find instructions step by step in this link for each step. Reset will be particularly important because it is one of the most effective tools to correct the problems of material with a printer. Here is the link: http://support.hp.com/us-en/document/c01312792

• Very slow network with 10 Workstation and Windows 8 / 8.1 Windows

  Hello

  I come to you because I have a problem with the network with 10 Workstation and Windows 8 / 8.1

  In fact, if I copy files from or to a virtual machine with my host of Windows 8 by sharing Windows (SMB / CIFS), it is very very slow and unusable.

  Example: My host is a Windows 8 x 64 and Windows 8 x 64 host: transfer speed is about 100 or 200 KB/s and often 0 KB/s (transfer seems to be paused).

  With a guest Windows 8.1, same problem.

  After many tests, I also tried with Windows PE 5 (same kernel as Windows 8.1): same problem, unusable.

  But, miracle, if I use "Utility MSI - X OFF" Intel, I reboot and the problem disappears.

  There:https://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng & DwnldID = 18946

  Someone in this community, said that it have the same problem and a workaround solution was not to use Intel e1000e but e1000 then: I must admit, it works.

  With e1000, speed is around 30 to 60 MB/s and stable.

  But, by default, 10 Workstation e1000e value when I create a new VM Windows 8.1, so it's a problem... Do not manually change for each new virtual machine and explain this to my students.

  Please, you can reproduce this bug and fix it?

  Thank you very much.

  New workstation 10.0.2 fixed this bug. Perfect.

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• HP Officejet Pro 8600 more e-A: printer only prints blank sheets with a footer only. In preview mode BEFORE PRINTING displays the same.

  Printer only prints white sheets with a footer.  In preview mode BEFORE PRINTING displays the same.

  Used HP Print prints doctor and TEST PRINT correctly and find the Wi - Fi of my printer.

  Problem started right after that MS has downloaded?

  No, it did not apply to Notepad.  I restarted just after MS update and everything printed correctly again.  I had not done so to preserve Web pages active I tried just several days!

• White print pages only printer

  Whenever I try to print a document from any program, my printer prints only a blank page. I changed the cartridges, thinking they were weak, but it was not the question. When I try to print a test page, only yellow prints. On all other documents, the printer goes through the movement of the fixing toner, but nothing prints on the page. Could someone please help me solve this problem? Thank you.

  Hi kriscamp,

  Here is the document troubleshooting you will need. Now even if it's for a c4680 with error message, please try it when even - he got the most steps for cleaning of inks and contacts, etc...

  http://support.HP.com/us-en/document/c01675471

  I do everything here at least once - except replace the inks with the new, you don't need to do it again.

  Give it a go and please let me know if it worked

• HP 8610: Printer scans only through the tray and not the ADF

  I recently bought a HP 8610 and installed Windows 7. Printer scans only through the plateau. Originals loaded in the ADF (there is a sound that confirms this), but the default scan is flat. Infact the options of the status bar in the configuration of the printer displays only Tray 1. Help, please.

  Hello

  The HP Officejet Pro 8610 software click on scan a document or Photo.

  Ensure that all source scan as use charger (if installed) documents and not as the glass flat.

  If that doesn't help, can make you a copy of the feeder by selecting copy > start copying in black from the rpinter Panel?

• Deskjet 6988 printer to wireless network (laptop Envy w / Windows 8.1)

  I got my printer HP Deskjet 6988 years and still it was connected to my desktop via a USB 2.0 cable. I bought a laptop HP Envy with Windows 8.1 and want to connect the printer through my servant/Belkin router network, as the USB 2.0 cable provided with the printer does not seem to work in the USB ports of the desire for direct printing. The software disk did not work in the laptop, so I downloaded the software and utility software (printing and scanning) to 8.1 on the HP site.

  I ran the download, the installation wizard has started, said "the wizard will connect to the internet and help install the best software available for your printer." I clicked on next, and opens a window "Device discovery" and then an another "recovering the device" then... nothing.  The wizard window closes. My installation manual is useless. It tells me to use the wizard on the software disk that does not work on my laptop (and is obsolete and for the operating system still wrong, because it was for my office, which took place on VIsta.)

  I somehow managed to get the printer installed on the laptop - I can see it under the available printers.  And if I have an ethernet cable connected directly from the printer to my router, it will print. But if I unplug the ethernet cable, it will not print. I can't keep the ethernet cable is connected for printing, because the router is in my living room, behind the TV and my office is on the floor. I prefer not to keep my printer on the floor of the living room by our TV, so I really need to work wireless!

  My problem is how to make the printer added to my network (Belkin router) servant. The wireless router is all set up and functional - I use actually it from now to access the internet and to post this message.

  So, my printer is installed on my laptop. The driver is the most recent, intalled today HP.com and I don't have a software disc to use for a Setup Wizard.

  What are the next steps to connect my printer on the network, so I can print wireless? If all goes well, I gave enough information. I have read all sections of the HP.com customer help on service and none of them seem to tell me what to do.

  Thank you!

  By a lot of trial and error, I actually thought about it myself. I did a lot of jumping around, so I hope that I can remember what I did:

  (1) install the printer driver using the diskette or download.

  (2) connect the printer to the router by an ethernet cable, which looks like a big phone cord (no need to connect the printer to your laptop).
  3) implement the system of the laptop 'search' on your laptop and in search type "Network" and then click on the 'Network' link to open it.

  (4) you should see the icon for the printer on your computers and other devices already present on the network.

  (5) double click/tap on the icon of the printer and it will open 'web page' the printer in your browser.

  (6) click / tap the 'Network' tab near the top of the scren.

  (7) in the left sidebar, under 'Connections', click 'Wireless' to open it.

  (8) start and use the wizard to enter your router information. (You must specify the printer a different name here, so you can distinguish it from all other printers on your laptop.) For example, I named mine "Deskjet" 6988 Network)

  (9) unplug the power cord of the printer ethernet.

  (10) If your wireless printer does not appear in the list of printers when you go to print something, you'll need to add:

  11) open looking for new portable computer system and type "Devices and printers" and click / tap on the link.

  12) click on the link "Add a printer" upward. The computer will search for printers and the new network printer should appear in the list (hint: he wil have an IP address in the 'Address' column rather than a file.)

  (13) add the network printer and run the test to ensure that it works. Make your default printer and may delete all other 6988 printers listed if you want to.

  (14) you should now see your network printer in the printer list when you go to print something.

  I hope this helps someone else someday!

• My printer says 'only runs of aps' and won't print my emails. Help

  Help

  HP 4500 series printer.using Windows 8.1

  I rebooted the Printer Wizard of HPPrinter using software and the problem disappeared, and it works fine

  . Sorryforthe bad...

• network variable will not work with VBAI 2010 and windows 7

  Hello

  In fact, I have a problem with 2 EVS-1464 (windows 7) and VBAI 2010.

  I have to use network variables to allow the communication between two electric vehicles, but I can't use it. My network is ok (I can ping between the two facilities) but I can't (t access the network variable.

  I did a test with VBAI2011 EVS / VBAI2010 PC windows XP--> it works. (but I don't want to use VBAI 2011).

  You have solutions to solve my problem?

  Thank you

  Ulysses

  Hello

  Here are several documents that might be useful for you:

  Using the LabVIEW shared Variable

  Troubleshooting network-published static Variables

  How can I use shared Variables to transfer data from Vision Builder for Automated Inspection (VBAI)...

  You can also try something. To do this, you must go to the EXE VBAI here:

  For 32-bit machines:
  C:\Program NIUninstaller Instruments\Vision 20XX\ VBAI

  For 64-bit machines:
  C:\Program Files (x 86) \National Instruments\Vision VBAI 20XX\

  Right-click on "Vision Builder.exe", and then select Properties.  Make sure "run this program as an administrator" is checked.

  Click OK, and then try to rerun VBAI. You may need to redeploy the variables in the variable Manager until they work properly.

  Kind regards

• problems with 5.01 and Windows 8

  Hello

  I've been having some problems with the 5.0.1 and Windows 8 and wanted to see if anyone knew these.

  1 aero glass does not work correctly. I originally had problems with Office 2013 and which was fixed by disabling hardware acceleration for office only

  2. problems with USB currencies when 3 USB is enabled. The custom of the machine is taken out of service and the machine locks up frequently. As a solution, I changed the virtual computer to use only USB 2.0

  Thank you!

  Aero has not been removed in the RTM and retail of Windows 8?  I thought it was.

• HP6520 printer prints pages randomly like Tin Tin and puzzles whithout asking me.

  Time to time my printer done burst into life when he was operated for a while and the random print unwanted, appears to be the small images on screen as Tin Tin and puzzles.  It is spontaneous and color.

  Thanks for the information.  I think I must automatically subscribed for printing applications that I've never been on the page manage applications print or signed on the HP site.  I hope that she doesn't have them.  They still display as icons on the screen of the printer and I think others need to be aware that these seem to be set in the printer at the time of purchase.  I don't know if it worked as they were so randomly, but I hope that this prevented the.

• RAC with Oracle VM and Windows Server

  Hi all,
  
  We want to implement the system with Oracle database 11g or 10g 64 bit (CARS) on the OS of Microsoft Server 2008/2003. We do not have enough licenses for all the hearts, and we want to find a way to implement the RAC database with existing licenses.
  
  Is this a good solution to use virtualization, as Oracle VM?
  How much is safe to use virtualization?
  Can we do Oracle Real Application Clusters (RAC) environments Oracle VM with Windows Server 2008 64-bit (or 2003 Server) operating system and use hard partition?
  Is it better to invest in licenses or try with Oracle VM?
  
  
  Oracle VM can be configured so that it is recognized as a difficult score.
  Hard partitions allow customers of one license these CPU used by the partition instead of license all the processors on the physical server.
  Source: oracle.com
  
  
  Thank you!

  Virtualization is not certified for Oracle RAC on Windows.

  + Software on Oracle VM [464754.1 ID] + notes States certified:

  Oracle Real Application Clusters (RAC)
  
      Oracle 10.2.0.4 and up (10gR2) and 11.1.0.7 and up (11gR1) and 11gR2 RAC for Linux x86 and Linux x86_64 certified on Oracle VM
          Guest OS: Oracle Linux 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
          Paravirtualized (PV) mode only (Guest OS and drivers)
          Only supported on Oracle VM 2.1.2 and above
          Live-migration of an Oracle RAC VM is supported with Oracle VM 2.2.1 and above.
          Previous versions are not supported. Please refer to this link for best practices.
  
          Over-committing CPUs is not recommended, but supported with the following restrictions:
              The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed
              two times (2x) the amount of real CPUs / cores in the Oracle VM server.
              The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs /
              cores in the Oracle VM server.
              Maintain Oracle VMs default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
              CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
  
          Static support only (dynamic support is being planned):
              Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
              Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported. 
  

• No sound with Tecra A9 and Windows 7

  Hello

  I just installed Windows 7 on my Tecra A9 and now: no sound. I ' v installed all the latest drivers but nothing to do: no sound.
  Does anyone have the same problem? And especially have solved?

  Thanks for your help.

  PS: The mute off the coast of the working tools doesn't work with Tecra A9 (is there an update?)

  Hello

  > I've tried the mute off tool, but it is not compatible with Tecra A9
  You need to install the VAP (Toshiba Value Package utility added) before using this tool!

  Check again!

• is - this el capitan IO works with parallels 8 and windows 7?

  I'm running IO 10.8.5 on my MacBook Pro and also have 8 parallels to run windows 7, will El Capitan IO work well with my set up? don't want to stop using Windows 7 on my machine

  Thank you

  Parallels has warned many users of its virtualization software Parallels Desktop for OS X version 8 is not compatible with the next OS X 10.11 El Capitan.

  Windows 7 will migrate in work on El Capitan w / Parallels