HP6520 printer prints pages randomly like Tin Tin and puzzles whithout asking me.

Similar Questions

• Printer feeds a blank sheet with each printed page only with HP Envy and Windows 8

  My HP ENVY Phoenix h9 - 1440t PC running Win 8 causes my HP Photosmart C7280 AIO feed a blank sheet before printing each page.  The printer is connected wireless to the router and works normally when printing to my HP dv9000 equipped of VISTA.  Is this a problem of victory 8?  How should I do?

  Hi Gnerd5

  I understand that the computer with win8 feeds a blank page before printing the Photosmart c7280.

  You go to the website www.hp.com and download drivers for win8?

  The software may not be installed correctly.

  I would recommend that you download the drivers from the url I've provided, simply select the appropriate operating system and if it is 32 bit or 64 bit and select the driver-product installation software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785&LC=en&cc=us&DLC=en&lang=en&cc=us

  or you can run the installation of printer HP Assistant for windows from the link below.

  http://support.HP.com/us-en/document/c02691615

  To determine if this is 32-bit or 64-bit click on the url.

  http://support.HP.com/us-en/document/c00757948

  If you need more simply make assistance let me know.

• PageWide Pro 577 HP MFP: HP PageWide Pro 577 MFP Printing with random pimples on some pages

  I have two problems with my new MFP HP PageWide Pro 577 eventhough I later installed the drivers and firmware:

  I printed more than 1,000 'professional' and a few pages of quality 'Présentation' on this week less 2 NEW printer.

  1. I believe all > 100 printed pages with a size of random points about 1 mm round shape appear anywhere on the pages - sometimes few of them on the same page.
  2. Unable to print PowerPoint presentations - I need to create a PDF file and print it out.

  What gives?

  Thanks in advance.

  Hello

  I think that this problem had been resolved as a problem of quality of paper.

  Thank you

  TalalPWS

  HP employee

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• printing page is shruken and I need to copy content and paste

  Suddenly, after years of success printing from my browser, that I can't! Printing on one of my computers about 20% of the right size and I copy and paste into Word or download in another format for print. That tells me that it certainly comes to Firefox and I spent more than 2 months to try to diagnose the change?

  Two months! You must be a very patient person.

  When you go to the overview screen by using either:

  • button '3-bar' menu > print
  • (menu bar) File > print preview

  You can test with 100% instead of shrink scale to adjust the value. Puts these changes what is displayed in print preview mode?

  Firefox learns your paper by default/current size by extracting the information from the printer driver. Occasionally Firefox will get it wrong and think that your printer uses small sizes of paper and the will to reduce printing to adapt, for example, in the upper left quarter of the page. If this sounds like what you set, you may need to reset the printer data saved in Firefox. This article offers suggestions on how to do: solve the printing problems in Firefox (point 4).

• I want to print a full URL in the footer of a printed page. How can I do this?

  I want the full Web page to print URL in the footer of the printed section. When I have the URL printed in the footer left section he gets cut by the Central footer section that is cut off by the footer to the right section.

  Firefox cut the URL in your print, if it's really long, and you also on the same line (header or footer), Date and Pages

  What I have summarized below are based on this page... http://www.watchingthenet.com/how-to-change-or-customize-Firefox-printing-defaults.html

  I have two questions:

  - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  To fix, do a custom configuration for the header and footer as follows:

  Print / Page Setup / margins & header/footer / 'Customize' the 'left' as follows (leave the centre and right all white)

  & T
  D & U...... PT

  & D shows the short date: dd/mm/yyyy - and then the time

  To change the format of the short date in Win 8.1, go to:

  Control Panel / Date and time / Date and time tab / change the date and time / change the settings of the calendar.
  Date / date short... change of j/yyyy...... MM/DD/YY

  QUESTIONS RELATING TO THE:

  1.) how can you get rid of the time, who appears after the date? In Internet Explorer, you use a tiny "d" character - but that doesn't work here.

  2.) is it possible to change the right font for the header and the footer, to something like 10 of Microsoft Sans Serif?

  - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Firefox leaves no room around the text in the header and footer to the edge. To fix:

  Address Bar / about: config
  Enter the keyword "edge."
  Change then the four values of the printer that you use to:

  Print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom... 5
  Print.printer_Foxit_PhantomPDF_Printer.print_edge_left... 10
  Print.printer_Foxit_PhantomPDF_Printer.print_edge_right... 10
  Print.printer_Foxit_PhantomPDF_Printer.print_edge_top... 5

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Photosmart 7762: Photosmart 7762 small print page in A4 since the upgrade to Windows 10

  I have just updated to Windows 7 to 10.  When I go to print an A4 document now doing at a reduced size that I have an additional border of space to the left and down.  The page is set to A4 of the printer is set for A4 and I tried printing and printing actual size to fit, but it makes no difference.   I deleted and reinstalled the printer so that it would probably use the most recent driver, but even when it makes no difference.

  HELP PLEASE

  (PS. My old LaserJet 1200 always print the same document A4 correctly after the upgrade to Windows 10)

  Problem solved.

  First tried to download HP printer Installation Wizard, which is installed as a brother of generic but with HP Photosmart 7760 showing when you click above but it just printed pages of random characters.

  Then the printer found possedantes-advanced-new pilot and started to windows update and it evetually listed series printers so I clicked it and now it prints A4 OK again.

• Photosmart C6380: after unloading/reloading drivers still print page 3/4

  I've recently updated for Windows 10.  Since my computer (HPE-510y) has been printing only 3/4 page.  I have uninstalled/reinstalled drivers without a bit of luck (although the HP Solution Center now comes to the top) when I clean the printhead that a complete page is printed, but otherwise not.

  Hi @tkleigh,

  Welcome to the HP Support forum.

  I understand that you recently upgraded to Windows 10 on your HP computer. Since the upgrade to Windows 10 your HP Photosmart C6380 all-in-One Printer has been printing page 3/4, even after uninstalling and reinstalling series printer all-in-one HP Photosmart C6300/6324 Full Feature Software and Driver. I would like to help with that.

  I would like to start by running the HP print and Scan Doctor to see if problems are diagnosed or fixed.

  Here is a document that deals with printer problems after the upgrade of Windows 10 can be useful - printer problems after upgrade to Windows 10.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet 7310 all-in-one: on the printed page without is not the margin settings and are shredded

  During a few days ago only, printer started the show message paper jam when the printed page was all but probably 1/8 "already out.  Flicking the paper really brought the page on the rest of the way.

  I remove the paper two-sided accessory to find any paper, but there is no paper jam that I can see.

  Also, in the middle of printing, sometimes it makes a loud squeaking (I guess), but kept in printing and sends the page completely.

  Then I started to notice that the left margin could tilt inward I look towards the bottom of the page or it can be different from one Word page to another and a blur occurs in a word here and there.

  Finally, on the printing of Excel pages, I see a different left margin on what I consider every 2 lines.  This, of course, affect the right margin in the same Manor, and the vertical cell lines also vary according to the variation in the left margin.

  The HP software tells me there is no update for me to download.  However, I do know she never talked about everything.  I have not seen this specific problem listed.

  @Sunny-Gal Hello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I suggest to remove the cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP DeskJet 2546B: Deskjet 2540 stops in the middle of the print page

  I was not able to connect my computer to my pc via wifi a colledge, so I connect my printer via the usb port on my pc (I use the white cable provided with the printer that connects to the back of it). Impression of normal word documents is very well, but I have been tring to print several pages of a pdf file and it stops a few lines of print. No error message, no warning sounds, just stops. The power light flashes too.

  The cord is still plugged, it says in my devices on my pc that is always connected, and I can see the print job in my what. I can delete from my without any problem and it will spit the rest of th page. If I leave without doing anything, he will spit the pages finally after one minute. It will always work in Quebec of the printer, but it won't do anything with it.

  And I can't seem to convert the content of the pdf in word format to work around the problem.

  What can I do to fix this?

  Hi @Roket107,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a HP Deskjet 2540 all-in-One printer with a Windows 10 computer and when you try to print from a PDF file the print job stops printing without any error messages, but seem to print correctly from MS Word. I would like to help.

  I would start by checking the printer software installed by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  It could also help to ensure that the updates of Windows are updated.

  If HP Printy and the Scan doctor does detect no problem with printing software, perhaps that the software used to view and print PDFs must be updated, or uninstalled, then reinstalled.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Laserjet 1020 will not be printed. Don't market not even register on the print queue. Don't test print page

  My HP Laserjet 1020 is erratic for a few weeks now. Sometimes, sometimes not print. But before the print job would record at least and usually, but sometimes not print. I would like to move the cable to a different USB port & some time which would be worlk. Suddenly, it stopped printing altogether. I have uninstalled & reinstalled. Tried the doctor print tool (twice now) and now the print job does not record. I also replaced the cable with one of my other inkjet printer (which works fine) & which made no difference. The doctor says all printing tool's fine but when I try to print the test page it won't register as a print job in the queue. In my view, which covers it completely. As for having downloaded anything lately, I have download Teamviewer and Utorrent, but I'm sure it was faulty before you download those anyway. Hope someone can help me. Thank you

  Oh... it worked fine for 6 or so years I've had. Bought new. Don't tell me the ink is low or anything like that.

  Return to the Vista by default; problem now seems to be resolved. Thank you for your help.

• HP LJ MFP M125nw Pro: HP LJ MFP M125nw - printing pages entirely black Pro

  Hello

  We recently purchased a HP LJ Pro MFP M125nw which has worked well so far. It has been used for about 2 months now and we have no print too many pages so far - it's always the first cartridge that we use.

  Recently, however, he began to print pages entirely in black, I can't yet recognize the shape of the letters and numbers on the page. Re-installed drivers on computer, printer, firmware tried with two other computer - the result is always the same. I even took the cartridge and she shook a bit (not sure) if it is correct. Now I'm completely confused.

  Can you help me, please?

  Thank you

  Gabor

  Hi GaborTorok,

  Thank you for your answer!

  If the steps described in the guide I provided did not resolve your problem, then the printer will need to be repaired / replaced. Let me know what is happening with the phone support, and if you wish, you can I can escalate this for you.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Good luck!

• Printing pages with additional layers - page by page

  Already posted this in the pre-press section:

  Printing pages with additional layers - page by page (DUPLICATE)

  But maybe the pros of Javascript are faster by giving a useful answer:

  Hello, need us a script to get a print of a document of two layers.
  The layer 'A' is a base layer, 'B' can be activated by clicking on a button on the layer "A" and gives additional information.
  The layers ('A' and 'B') which should appear in the following order: A1, A2, B1, B2... n1, n2

  
  Weather printing should be established in this way for the regular print command or can be implemented by a button.
  There is no limitation for that in the document.

  Hope I gave a clear statement on the challenge.  Thanks in advance.

  If you want to print each page twice, layer display and then layer B every time?

  In this case, you can use something like this (but the user may need to manually click the button print every time...):

  for (var p=0; p		   

• Print page layout and printing with photo shop

  Hi, I'm looking for advice as to weather or not the photo shop can do what I need? I'll try to find a print page set up where I can choose an image and resize it to lets say 50 cm x 50 cm, that measure 75cm of white space, blank media and a logo. Reason being that I try to print cushion covers where I need image on the front and logo on the back. but I need to be able to measure the space inbetween ect and measure the whole layout, so I can't print. cut. then stitch it. Can someone tell me or help me, if they think that this is possible. Only, I'm new to photoshop so any help is very appreciated.

  Sounds like a good candidate for a Collage and some automation model. Your Logo would be and top layer which is on top of the location of the image. As a shield of fireman in the demo video.

  Photo Collage Toolkit

  Scripts for Photoshop is powerful and I think that this package demonstrates this a video showing a collage of 5 model PSD image fills with images:

  The package includes four simple rules to follow to make Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.

  1. Models of photo collage for the desired print size - width and height of the size and DPI print resolution.
  2. Photo collage templates must have a background layer in Photoshop. The content of this layer can be anything.
  3. Photo collage templates must have alpha channels named "Picture 1", "Picture 2"... "Picture n".
  4. Photo collage templates layers above the background layers must provide transparent areas to reveal the images which will be placed below them.

  There are fifteen scripts in this package, they provide the following functions:

  1. HelpPhotoCollageToolkit.jsx - online help
  2. TestCollageTemplate.jsx - used to test a model of Collage of Photo while you're doing it with Photoshop.
  3. CollageTemplateBuilder.jsx - can build models that are compatible with this toolkit scripts.
  4. LayerToAlphaChan.jsx - used to convert a stack of the Prototype Image layers in a document template.
  5. InteractivePopulateCollage.jsx - used to fill interactively model Any Photo Collage. Offers more user control insert images and text.
  6. ReplaceCollageImage.jsx - allows to replace an object layer dynamic image collage populated with another image resized and positioned correctly.
  7. ChangeTextSize.jsx - this script can be used to change the size of text Image stamps when the size used by the filling did not work well.
  8. PopulateCollageTemplate.jsx - used to fill a Photo Collage template and leave the populated copy automatically opened in Photoshop.
  9. BatchOneImageCollage.jsx - used for the models automatically batch fill Collage that have only a single image inserted. The Collage or picture may be stamped with the text.
  10. BatchMultiImageCollage.jsx - used to model automatically batch fill any Photo Collage with images in an image source folder. Easier to use than the interactive script. Recorded collages can be twisted.
  11. PasteImageRoll.jsx - paste Images into a document to print on roll paper.
  12. BatchPicturePackage.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.  Rotation of images for a better fit.
  13. BatchPicturePackageNoRotate.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.
  14. PopulatePicturePackage.jsx - used to fill a Photo Collage fill with the same single image model and leave the populated copy automatically opened in Photoshop.
  15. PCTpreferences.jsx - edit this file to customize Collage fill preset scripts and add your own layer styles.

  Documentation and examples