Printer HP Laser Jet 1020 just stopped working. Maybe something to do with the spooler starts do not.

Similar Questions

• My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

  My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

  Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

  Good luck.

• installing driver printer HP Laser Jet 1020 on vista?

  Hello:

  Is it possible to install the drive of printer for my HP Laser Jet 1020 on the Vista operating system?  I wasn't able to find the driver on the line, so I used the installation disk, but it didn't work.

  Thank you

  Hello

  under HP link has all the drivers available for your printer model

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=439320&LC=en&cc=us&DLC=en&lang=en&cc=us

  ______________________________________________

  and this link has all the information required, how to use, configure, troubleshoot, etc.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=439320&LC=en&cc=us&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_US/439320/loc:0 & cc = us

• My printer HP G-85 has just stopped working. Get an error message. __

  My printer HP G-85 continues to give error messages and will not be printed. I have printed successfully a test page this morning, and then it stopped working again. No problem detected and no hotfix is applied by Microsoft fix it Help? Time to buy a new printer?

  Unplug the printer, uninstall all HP software, reboot, download the latest version of the software of HP and plug only when installing said. See if this is useful, otherwise there is a HP diagnostic utility

• burner Windows media player just stopped working - connect a burner and restart the player

  Original title: windows media player

  My burner windows 7 everything simply stopped working saying that I need to connect a burner and restart the player. Why is it a saying suddenly this and what can I do?

  Hi Noralie,

  Welcome to the Microsoft community.

  It seems that you are facing problems while burning the disc using Windows Media Player. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. what type of disc you are trying to burn?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest to see the link and try to run the Troubleshooter:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  See the article and check if that helps:

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• I can't get firefox to work at all. One day last week it just stopped working. He always says that the connection has expired.

  I have tried everything to fix and nothing works. I ran safe mode, disabled all extensions, removed and reinstalled. All that has been recommended that I found. It was fine the day before so I check the next morning and just used loading anything. I also did a full scan of the system with bit defender total. I don't understand what is the question. Can someone please?

  last week came a new version of firefox and firefox is usually updated automatically, that's why I suspected from your security software may be at stake here. try to remove all the rules for firefox.exe between the firewall program and let it detect the browser again.

• HP Laser Jet 1020 does not work. Order random print.

  Original title: printer does not work

  My hp laser jet 1020 printer has stopped printing of pages recently.  Worked well for a long time but print only a few sites will... Thanks for your help...

  You can ask the question in the following forums:

  Printers and all-in-one
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet
   
  Windows Vista IT Prop - Windows Vista printing forum

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/threads

  Tutorials on the problem of printers:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

   

   

• Printer does not print on HP Laser Jet 1020

  I use i5 Dell Studio with Windows 7 64 bit. I have a problem in printing using HP Laser Jet 1020. I have no problem with other printers such as HP Laser Jet 2600n (wireless network) and all-in-one HP PSC 1410.

  With HP LJ 1020, no response from the printer when printing (from all programs). I have re-installed the latest driver from the Web site of HP but does not help. When printing, the printer does not work with all the lights are flashing. However, the printer spooler showed that it was printed without the tail of any job. TeSp print page is not working too. Tried troubleshooting printer shows as not any problem. I tried the printer with a friend's computer and it works perfectly. Please kindly help thanks.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?OS=4063&softwareitem=bi-58677-3&LC=en&DLC=en&cc=us&lang=en&product=439320

  Initially bought laser jet printer 1020 for windows xp laptop.

  I just bought a new pc with windows 7.

  I opt above site to download the upgrade for windows 7 for my new computer. Note: I did not use records of pilot provided when I bought the printer.

  I downloaded the upgrade, saved on my computer. I then ran the downloaded software and my printer was automatically installed and I tested with a test page print all right.

  I hope this helps someone.

  DRC

• HP LASER JET 1020 not print even one Page of Test.

  HP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).

  can someone help to solve the problem?
  Thank you

  HP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).

  can someone help to solve the problem?

  Thank you

  (1) U have tried to reinstall the printer drivers? Try to clean the print cartridge using the hp software installed...
  (2) if the problem persists, reinstall the cartiridges...
  (3) make surré cartiridges meet ink, the wires are properly pluged in electricity, as well as cable usb to computer, usb messages work
  (4) try to refresh service printer spoiler...
  Run this file bat using to run as administrator

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  (5) use HP Print and Scan Doctor (find and fix common problems printer using HP for Windows diagnostic tools)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02073861

  If necessary
  Contact hp help and support
  http://WWW8.HP.com/us/en/support.html

  Contact hp support forum
  http://WWW8.HP.com/us/en/supportforums.html

• HP Laser Jet 1020: Print LaserJet

  Hello

  my Mac book pro crashed. I received another similar Mac Book Pro (7-8 years) of a friend and plugged on my HP Laser Jet 1020 (10 years) I had my old computer connected whenever I printed my documents.

  I click on 'Print' it seems that if everything goes well. But then the printer 'app' on the dock Gets a red sign on it and the printer never implemented. I think I downloaded the driver correctly, but - unfortunately-erased routines so I'll have to do it again.

  Where better that they find? I hope you can help me! -

  AND what could possibly be wrong because the printer does not start also when I had the drivers installed?

  I restarted and disconnected the mashines without result.

  Best regards, Britta

  Hi @Britta,

  Welcome to the Forums of HP Support! I see by your post that you need drivers for the Laserjet 1020 and the printer does not start. I want to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

• My print spooler app has just stopped working

  My print spooler app has just stopped working. First of all, happened about 2/3 months ago. How can I do otherwise?

  Restart it.  Right-click on computer and choose manage.  Affirm the UAC prompt.  When the console opens, find "Services" in the left pane, then select it.  In the right pane, drag down to "Print spooler" and click it.  Then click on the "Start the Service" button on the button bar.

• smoke out of my printer and printing that isn't affected more laser jet 1020.

  smoke out of my printer and printing that isn't affected more laser jet 1020.

  I'm worried please help.

  Hello

  More likely, what you see is steam or steam, it could be considered as smoke.

  Try to check the following and then follow progress:

  • Make sure that the product is in a well ventilated and is not under a desk.

• Dell 2230 Laser Printer sometimes I get this message: host driver printer for 32 bit applications has stopped working.

  Recently, I started using a new computer - a Dell Precision M6700 with Windows 7. Previously, I used a Dell with Windows XP and had no problems with my printer. Now, I have intermittent problems with get this printer to work. Sometimes it works fine, but sometimes, I get this message:

  Host driver printer for 32 bit applications has stopped working. I clicked so he could find a solution online, and it is never able to find one. I just get another message that says:

  An unknown error occurred while printing.

  Problem event name: APPCRASH
  Application name: splwow64.exe
  Application version: 6.1.760.1.17777

  Do you recognize this problem and is there a solution?

  Hello

  I suggest to go through the steps from the link provided and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the problem persists, you can also run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also contact Dell to:

  Product support

  http://www.Dell.com/support/troubleshooting/us/en/04/troubleshooting/ProductSelector

  Hope this helps and keep us posted.

• Laser Jet 1020

  Hello!

  I bought HP Laser Jet 1020 several years back and you want to install in my new PC, Dell - Windows 7 64 bit.

  He could not install. I downloaded the driver from the website of HP Laserjet 1020.  When installing to halfway, a pop-up message and says "Installation software printer has stopped working" - a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.

  I also tried to install the add printer and search for the model.  Updated list of the window - how ever it could not update and asked me to come back.

  Last time I tried to install it before and failed. The same problem. I dropped it and now I tried again... and it still the same.  In the end, I have to print documents in my office.

  Help, please.

  Hi LinaYippy,

  Uninstall the printer from Add/Remove Programs, and then download the driver again. Let me know if you manage to get the printer installed?

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=bi-101596-1&CC=US&DLC=en&LC=en&os=4063&Product=439320&sw_lang=

• HP 2840 color laser jet: scanner no longer works

  Our HP 2840 color laser jet parser component has stopped working, any suggestions on what is the problem and the solutions possible?

  We already tried updates of pilot, suggestions of shoot of problems that arise automatically, and simply turn the device. Copy always unit starting from the plateau.

  Hi and thanks for the information.

  This morning I just restarted the computer and who got the scanner going again. That said, I can always check the driver software and try these links to determine what really happened. Also, the computer is running windows 7.

  Thanks again for taking the time to post a reply!