Printer HP photosmart 8150 in Vista driver no longer works.

Similar Questions

• I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

  I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

  Can provide you advice on how I can overcome this problem.

  Concerning

  original title: update windows

  Hello

  Method 1:

  I suggest you uninstall all third-party software and then try to perform the system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  I also suggest to perform a system analysis File Checker.

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Post back with the results for further directions.

• Upgrade to Windows OS 8.1 for all-in-one printer, HP Photosmart C4385 of Vista

  My old HP laptop used the Windows Vista operating system. All-in-one printer, HP Photosmart C4385 worked very well. I have a new HP computer that manages the new Windows 8 operating system and I can't load the printing software as the new operating system is incompatible with the printing software. It is certainly another available driver so I can use my all-in-one. Please let me know what the fix is far ahead, but a new printer.

  Hello

  Software for Win 8.1 can be downloaded from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=3651156

• Need drivers for printer HP Photosmart 7350 in Vista

  I deleted by mistake the driver for my printer HP Photosmart 7350 to my Vista operating system.  I tried the patch with the other pilot, and it does not work.  Any suggestions?

  * original title - deleted hp driver *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=72886&LC=en&cc=us&DLC=en&submit.y=5&submit.x=9&lang=en&cc=us

  Please select your operating system to link above HP > download the appropriate driver.

  See you soon.

  Mick Murphy - Microsoft partner

• Video driver no longer works

  Original title: pioneering work of Vedio dtops

  I guess im not the only one with this problem. Ive went too the manu. site downloaded the driver and the date at the top, installed it and I always have problems with the same thing: Vedio driver has stoped working, he recovered. Ive also been the Intel site, Ive been too Dell and it is the same driver on both and the same updates, I think that these integrated chip suck overall. I wish I could change my vedio card. My chipset is intel 965 Express chip Family.is there another way to solve this problem? Help!

  Hi jaybird1959,

  1. is it a new or existing problem?

  2. does this problem occur when you start a specific program or does it occur randomly?

  You can try a system restore back to a point where you do not have this problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DVD drive no longer works and disappears from MS explore

  New "TSSTcorp CDDVDW SH-S223C ATA Device" Samsung dvd player is visible in Windows Explorer after starting the machine.  He can see an audio CD.  However, when a DVD is inserted it reads very slowly, then stops and the drive is no longer visible in Windows Explorer.

  I updated the firmware with a utility Samsung called Firmware Samsung ODD liveupdate, but this made no difference.

  Hello

  For a new disk that should really be fixed/replaced under warranty.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  --------------------------------------------------------------------------------------------------------

  You can try these but it seems that the drive has a hardware problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD drive no longer works Code 10 failure initialization

  My computer is less than two years.  It came with Vista.
  The CD/DVD multi Recorder initially worked, but has stopped working.
  Diagnosis say the drivers are up to date, but there is a problem with the device:
  HL-DT-ST DVDRAM_GSA - H60N ATA.
  I had not used a lot, so it should not really be worn.
  My problem looks like the display by "Jackie", but I noticed that our device numbers are different.
  Please notify.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

  Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

  Hello

  Code 39 means that the driver is corrupted or missing.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
  allows the reader to work (not re - install until the issue is resolved).

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Portege R500 - CD/DVD drive no longer works

  Does anyone found a resolution to this?

  Like David, my DVD Multidrive on my R500 abruptly arrested recently - I can open/close the player, but he does not appear in Windows Explorer as a disk is valid. Do not think that I have nothing installed on the machine.

  Interestingly, I never really use the DVD player. Indeed, because of all the * heat * questions, I used to "Power Off" of the device, via the DVD icon in the system tray (i.e. option enabled me to Power on / off the unit). So while the power was OFF, it's cold the machine, and so the fan was rarely on.

  Now that my computer no longer recognizes the drive, this icon it simply shows that disabled, no possibility to the power on/off switch, and this noisy fan is almost always on. In addition, because it seems that the machine tries to recognize the drive subject time at startup, all re-start, reboot the machine now takes a few minutes to start...

  For the optical drive firmware update help? Or is there some other fix?

  Hello

  > but my Portege R500 CD/DVD drive has stopped working the next day, I had attached an external CD - RW drive for me to burn discs. Maybe it did disable my built-in drive?
  This could be the key;
  Try to access the Device Manager and remove the CD/DVD player listed and all USB host controllers and USB root hub.

  Again, restart the laptop.
  After new check restart if the CD/DVD drive has been recognized again.

• External USB floppy drive no longer works

  I have a model #: p6710f computer from HP running Windows 7 desktop.

  I myself bought an external Bytecc USB Portable diskette (Floppy) disk. Although it did not work initially, it began to work a week later after some updates on my computer running. The work of at least a year since then diskette drive.

  Now the last month, the floppy drive does not show in the list where you can find the C drive or the D drive. You can hear the floppy drive respond when it is first plugged in, but it does not show on the screen which you access.

  Is there anyone who is able to understand why the floppy USB drive won't work with my computer? What should I do to solve the problem?

  Thank you for your response. Uninstalling the driver, restart the computer, and then reinstall the process... I had already tried this a few days ago. Although the computer recognizes drive as new hardware and load the driver, I was not yet able to access the disk. But here's the strange thing...

  My office is where I got this problem. Yesterday, I connect the floppy drive for my laptop for the first time. The laptop recognized as new hardware and load the driver. I was able to use the floppy drive on the laptop. Out of curiosity, I disconnect the floppy (USB connection) of the laptop drive and reconnect to the desktop computer. The Office has recognized as new hardware and load the driver. I am now able to use the floppy drive on the desktop. Weird that it is... my question to get the floppy drive on the Office to work is now resolved.

• Windows Vista Upgrade no longer works

  Windows Update no longer works.  I have it set to auto, but nothing happens.  He just keeps showing "check updates".

  Any help would be appreciated.

  Q: do you have AdwCleaner, JRT, MBAM and/or HitmanPro detect and quarantine/remove anything?
  A: Yes. Tracking cookies, the residue of a previously deleted program and a number of potentially unwanted programs.

  Very good - but this does not necessarily mean the computer is more infected. Speaking of which...

  The computer connects to the internet through a router or a modem/router combo? If you it would sure be useful to reset (or, better still, reinstall) the device. Router fester, too!

  Comments: It's one thing to get a computer fully patched. Get the update of Windows (and automatic update) works again, it's another. There yet, the Support extended (and updated) for Vista ends 5 five months from now (11 Apr-17) so you can be able to limp along until then by the update via Microsoft Update Catalog (or the Download Center).

• Vista themes no longer works.

  I recently installed a Windows update (update for Windows Vista for systems X 64 (KB2524375)) March 23, 2011, and it is Windows Aero and even Windows Vista Basic color schemes to no longer work. They can be selected, but the preview is black, and it does not change when I apply. It happened with the same update (update for Windows Vista (KB2505189)), on another computer of mine, with the same problem.

  Edit: I also want to add that the system restore stopped working and restore points have been removed when I tried to come back before the installed update.
  Edit #2: I looked in the services that are related to the Vista themes: Desktop Window Manager Session Manager and themes; but they both started and the startup type is set to automatic. I tried to restart these services, but that did nothing. Desktop Window Manager is running, but the theme does not work even then.
  Edition #3: When I stop Desktop Window Manager, then restarted, but now the themes are no longer available for selection under color schemes.

  Solve problems with Windows Aero

  http://windowshelp.Microsoft.com/Windows/en-us/help/c33fe91a-9E6F-41F4-ae82-3ed2d5fa2fbf1033.mspx>

  In addition, you can check up to http://support.microsoft.com/kb/931712 .

  03/31 / 1103:43: 17 am

• loss of connection to printer Wi fi - The WiFi Miniport driver does not work

  When you troubleshoot run he advises wi fi min port driver does not not, but won't let me not re-install a driver. I have a wireless printer that I must be usng like running my own business from home!

  says printer connected to the wireless network.

  Have been using cable but not practice as printer no scan & send directly to the pc using cable & I use option of analysis many documents, etc.

  What do you suggest me?

  Hello

  1. What is the serial number and model of the printer?

  2. are you able to browse Internet wireless?

  3 did you changes to the software to the computer before the show?

  4. What is the operating system installed on the computer?

  Steps to update driver Wifi Miniport Adapter:

  1. click on the Start button.

  2. in the search box type devmgmt.msc , and then press ENTER.

  3. Select the device Wifi Miniport Adapter, to the title of the network adapter and right click on it

  4. now, select uninstall.

  5 restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  For more information, visit the links below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista (this article is for vista, but can also be used for windows 7)

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://support.Microsoft.com/kb/283658

  Hope that helps.

• FINGER PRINT BIOMETRIC ON MY HP PAVILION dv6 NO longer WORK AFTER REINSTALLATION o/s

  The portable biometric finger print on my HP Pavilion dv6 PC device does not work.

  I get the message:

  1. the fingerprint reader is not detected (during startup before connect you).

  2. Windows has detected none of the biometric devices on this computer (when I checked via Control Panel).

  I went into this challenge when I reinstalled my OS windows 7 after I realized that I had some corrupted files and could not install HP printer on my computer.  Unfortunately, I don't have the original restore file so I had to reformatting and reinstallation of the o/s.

  Help, please.  My operating system is Windows 7 ultimate.

  CECOM,

  You have an older model of the dv6 series.

  Your computer wants to turn the Digital Persona of the security of the software version.  During their early years, HP sometimes referred to as HP SimplePass RFP software; the programs are actually two pieces of code and are not associated with another, except that they are doing a similar job and both do not use a fingerprint device driver.

  You want to install the driver of device fingerprints first on this page: fingerprints of validity sensor driver

  Restart the computer and log in.

  Then, install the Digital Persona software from this Page: HP SimplePass by Digital Persona

  Restart the computer and log in.

  The fingerprinting program should appear - I think (it's been several years I saw him) in your bar tasks, or perhaps as an icon on your desktop.  Click to open and start.

  I think there is a built-in Help file, too.

  There's a little more: you want to export your webcards (passwords and Web pages).  When you get up the fingerprinter configuration, I think backup (in this version) is under "backup and restore" in the lower left corner.

  Good luck!

  This can help, although I'm not sure about the content, or if it relates to your version of RFP:

  Using the HP SimplePass (Windows 7, Vista) fingerprint reader

  I am sorry to be so vague - I used to know what is good; It has been long since I supported this package and my DP V5.2 release notes are lacking.

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  HP will never call on the phone and ask for money to 'secure your PC.

  Say "No, thank you," and hang up.

  Cybercriminals can call you on the phone and claim to be from Microsoft.

  See: Microsoft Security & Security Center

  Mark my answer "accept as Solution" when providing a solution or workaround!

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Satellite A200 - after the mouse USB Vista updates no longer works

  After installing the latest updates Vista (KB938371), I discovered that my mouse USB (Genius Traveler) does not work. I can't restore the system (mistake) and this update cannot be removed. Other (flash disk) USB devices work correctly.

  Could someone help me? Thank you.

  Problem solved, I found this on another forum

  + Hi all, +.

  + I found the solution on another forum (forget which) and published this solution in multiple threads. The problem is, as indicated, a Human Interface Device in combination with update KB938371. After installing it, my usb mouse stopped working. Just go to the--> HID Device Manager - devices--> unknown device and looking for drivers. Vista won't find any drivers online, so you must get the drivers on your computer. The location of the driver (in most cases) will be C:/Windows/Winsxs. You will get a window saying: "this is an unsigned driver blah blah blah". Just install the driver. The mouse worked for me (even without reboot). +

  + OS: Edition Vista Home Premium 64-bit. +

  Dr. +