Printer lazer 1517

Similar Questions

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• my hp lazer jet p1102w printer resume printing via airprint when not available

  Hello

  I have the hp lazer jet p1102w printer. I've upgraded to the latest firmware.

  What is not available in the printer paper and I reload, it does not resume printing via airprint in my ipad.

  especially when I want to print on both sides. I can't resume printing. What should I do?

  Hello

  Once you have loaded paper in the tray, open and close the printer cover. who will resume the print job and complete it.

  Shlomi

• Brother MFC 9700: Cannot send e-mail to the printer (Brother MFC 9700 lazer)

  My printer has the ability to scan to e-mail, but it does not work.  Can you help me?

  This printer is made by the company named brother, you're on the wrong forum.

  This brother user manual, posted on the Brother website, maybe a good starting point: https://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_9700_EN_1365.PDF

• printer 1815n lazer said paper when there is paper in the tray, how to fix

  I don't know what has changed, the printer was working fine and then started saying out of paper. I tried to put more paper, less paper, to take it in and out of the status bar.  Turn on the printer and restarting. I'm not savy with this printer, I recently bought, 2nd hand. Can anyone give me a suggestion, what else to try?

  Hello

  This happens to you while I try to print a file in particular?

  Step 1: Check the media and print settings

  1. when the printer is turned on, remove the power cord at the back of the printer, wait 30 seconds and then connect the power cord to the back of the printer.

  2. If the printer is not already on, turn it on by pressing the power button.

  3. replace any paper that is torn, dusty, wrinkled or folded. If the paper is curved, sketching paper, folding gently in the opposite direction of the one who rolls up or replace the paper.

  NOTE:

  Use plain paper in the unit until the problem is resolved.

  4. check that all the papers are the same size and type.

  5. press on the stack of paper on a flat surface to align the edges.

  6. check that the stack of paper to load into the device contains between 10 and 25 sheets of paper.

  NOTE:

  Do not load too much paper into the printer.

  7. Insert the stack of paper into the printer and then gently push the paper guides comfortably against the paper.

  8. set the paper settings in the print driver. The paper in the printer driver settings must match the paper settings for at least one of the installed paper trays.

  a. open a document in the application in which it was created.

  b. click on file.

  c. click print.

  d. click on Properties. The printer properties dialog box displays.

  e. click on the paper/quality tab.

  f. in the drop is size , select the size of paper loaded in the device.

  g. in the drop type , select the type of paper loaded in the device.

  h. click OK.

  NOTE:

  These changes do not change the default print settings. The print settings will revert to the default print settings the next time the application is opened.

  9. in the print dialogue box, click OK to print the document.

  10. try to print again. If the problem persists, continue with the next section.

  NOTE:

  If the problem is resolved and you want to print on a different type of media, change the paper in the unit and repeat steps 2 to 7 for new media.

  Step 2: Clean the rollers

  1. turn off the product and unplug the power cord.

  2. open the access door for access to the rollers. According to the model, this is usually the rear access door. See the user guide for more information on the location of the rollers.

  3. clean the rubber with a non fluffy cloth rolls, slightly impregnated with water.

  NOTE:

  Distilled, filtered or bottled water is recommended for cleaning the rollers. The tap water may contain contaminants that can damage the rollers.

  4. make sure that the rolls of paper based on the feeder, which lie behind the reels back, is cleaned. A cotton swab slightly moistened with water, may be necessary to achieve these rolls.

  5. close the access door and plug the power supply cord.

  6. try to print again. If the problem is not resolved, continue to the next step.

  Step 3: Repair the unit

  If you have followed all the steps and you are still experiencing a problem, service your product.

  Cause

  One of the following problems may cause the error message:

  ·    The paper is curved.

  ·    The printing side, or shiny side, the paper is not loaded in the feeder upside down.

  ·    The paper can not be engaged with the feed rollers.

  ·    The width of the paper guide is adjusted too tightly against the stack of paper.

  ·    The paper tray is not completely inserted in the product.

  ·    The paper in the printer driver settings do not match the paper loaded in the paper tray.

  ·    The driving rubber rollers are covered with dust.

  NOTE: You can also contact the manufacturer of the printer as it can also be a problem with the printer settings.

  Step 4: Turn off bidirectional printing and search for the issue.

  Here's how:

  a. click the Start button > click on Printers and faxes.
  b. right-click on the printer icon, then select printer properties.
  (c) in the Properties window, click the Ports tab.
  d. clear the check box for enable bidirectional support.
  e. click on the OK button.

• is there a driver for a canon Lazer MF3240 printer out there? That wil run on windows 7 64 bit?

  Updated 7-64, SP2 from XP - 32 and the driver is not compatible. Tried to run the program compatibility XP from Windows 7, but so far no results

  In order to use Windows 10 with her because they offer me free.

  Go here:

  They seem to have the necessary drivers.

  Canon MF3240

• new printer does not recognize worm FF 28

  I was using a brother HL1435 lazer printer on my desktop using Windows XP pro. I installed a
  Printer Kodak ESP3250 and other programs accept the new default printer. When I went to
  Subject: config and searched for print I found only references to the HL1435 brother. I have reset the
  Reference Print.Printer and restarted Firefox. When I go to file print nothing happens. I went back
  the configuration file and to reset all items starting with print and restarted firefox. Firefox will still not
  impression and the config file has no printer listed.

  I installed my printer in my laptop and firefox recognized without problems. My computer laptop and desktop running Windows XP. I completely uninstalled firefox from my office and checked the files of the profiles were gone then resettled and the printer still does not work. Ive had with FF so I'm uninstalling and going to chrome. Thanks for the suggestions.

• OfficeJet k7100 - will not print on darker colored paper

  Hi all

  I hope for more help. I like to play and I want to print on lazer blue paper in grayscale. However, whenever I try the printer seems to ignore the fact that I have some paper in the tray and seems to give an error "no book". I tried to change the lighter paper and it works very well, it only dark paper.

  Any ideas or suggestions would be welcome.

  Thanks, Ethan

  Hello

  Done, I've sorted the problem. With the paper being dark, I understand that the sensor will not print. Then, I shone the torch on my cell phone in the printer and then clicked "print"... Hey presto, it prints!

  Thanks for your replies.

• HP Envy 4500 Series: Failure print

  HP Envy 4500 Series

  Recently installed above "All in one printer.

  Impressions on lazer standard copy paper OK but will not print on glossy paper HP?

  I tried to 180grm of 150gm paper weight. With the success of 'Hit and Miss' .

  I think it's a mistake of the printer, that is to say; resuming is not paper glossy!

  Re-inatalling instalation disk help?

  Any help wouild be appreciated

  Thanks for responding so quickly

  Re HP Envy 4500series

  Printer not feed or pick up paper HP clossy

  Tried 180g and 150g and double face HP Lazer bright

  Also tried to adjust the paper on the selection 'print '.

  Brian 26

• . Printer - printing of brilliant photos, coating melts when printing

  My laser printer samsung 3185, when printing photos in color using lazer color paper, glossy coating is melting (, printer is again 4 weeks old) impression is ok on plain paper.

  This is the wrong place to ask this question. This forum is for discussion, compliments, complaints or suggestions about the Microsoft Answers experience.

  In addition, it is not a Windows problem.  It's not even a printer problem.  It's a problem buying.

  All that being said...

  All laser printers use high heat to merge the particles of toner on paper.  This is how works a laser printer.  And that's why you should not use ordinary coated photo paper in a laser printer.  If you want to use the paper, you can buy paper that is specially designed for laser printers.  For example: http://www.shopping.hp.com/product/Q6608A?landing=supplies&category=paper&family_name=

• HP 1160 printer not print

  HP Lazer Jet 1160 Pronter does not print

  Facing the question with the Office programs or all programs?

  If you encounter the problem only with Office programs, try changing the printer driver default to another generic printer driver, printer XPS or OneNote and see how it works. If it works fine with another printer, then you must update the printer driver.

  Click on the link below for more information on how to change the default printer in Windows XP.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_set_default_printer.mspx?mfr=true

  If you encounter the same problem with other programs then, post your question in the forums mentioned below Windows XP.

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Ganesh Kumar N

• I need to download and install brother hl 2140 Brother laser printer

  I need sofware lazer printer hl-2140

  Hello

  See if this helps you:

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=hl2140_all

  http://www.brother-USA.com/downloads/default.aspx?PgId=1&R3ModelID=HL2140

  See you soon.

• OKI printer does not print not print not Word.

  All of a sudden my Oki C5100 not print the text / words during printing.  I have all new toner cartridges.  I think I need to restore my original Vista printing setting, but I don't know how.  Can anyone help?

  It turns out that it was a problem of Oki.  The cable to the lazer/bar was dirty and not connecting not the best.

• When you print pages in Internet explorer 9, the color is good, but black is extremely light

  When you print pages in Internet explorer 9, the color is good, but black is extremely light (Please note-not the toner) led 2135cn MFP color lazer

  Hello

  Thanks for asking! If I understand correctly, you are facing problem with printing from Internet Explorer, which prints very light black color.

  Before you continue troubleshooting, I would get the little information.

  1. have there been recent changes to the system before the show?

  2 is the issue limited to printing through Internet Explorer?

  3 are you facing this problem with any specific Web sites?

  4. do this problem occurs when you print through the files/applications?

  5. have you checked for ink levels?

  It seems to be that the ink in the cartridge must be completed. In the meantime I suggest you carry out these methods.

  Method:

  Follow the link and run the troubleshooting printertroubleshooter. Check if it helps.

  For additional information refers: link 1,link 2,link 3     

  Answer us with the results. I'd be happy to help you further.

• Brother printer wifi "the printer is unresponsive.

  Hello

  I'm new to Mac but am generally competent computer/network.

  My son is in a the student house where 2 guys have Macbooks and 2 have Windows Mobile 10. the printer is a Brother wireless printer/scanner/fax.

  Among Mac users and Windows users can send impressions and analysis perfectly, but only one of the Mac users cannot.

  I deleted the printer and downloaded the latest drivers and re-installed but still cannot print.
  I tried adding via IP address but still does not work. I also tried the Air and BrotherCUPS, but none worked.

  HELP............!!!!!

  Greetings thequizman,

  Thank you for using communities of Apple Support. It seems that you experience problems printing to a Wi - Fi printer. Looks like you already have a troubleshooting. I recommend reading this article, you have already done some steps here, but there is more information you have not mentioned by train.
  
  

  If the issue is not resolved, take these last steps to remove all the drivers printer currently installed that might be causing the problem:

  1. Choose  menu Apple > System Preferences, and then click Printers and scanners.
  2. Control-click anywhere in the list of devices, and then choose "Reset printing system" from the context menu that appears.
  3. From the Finder, choose go > go to folder. Type /Library/Printers/ , and then click surGo.
  4. The Printers folder opens. Choose Edition > select all to select all the items in the folder.
  5. Choose file > new folder with selection to all the selected items in a new folder named new folder with the elements.
     To save storage space, you can delete the folder new folder with items after you complete the remaining steps.
  6. Follow the steps described in previous section once more.

  If your printing problem is not resolved, contact the manufacturer of the printer to support.

  Troubleshoot printer on your Mac - Apple Support

  Take care.