Printer (model PSC 1510 with windows 7)
When switched on always print a test and on the images page prints only black people (such as the black etc. lines) and the quality is very poor, although ink color is present.
Thank you
Hello rafailidisd,
The alignment page keeps printing whenever you turn it on because it has been initiated, but never finished. Once the alignment finishes page you need to scan, then the process will be completed.
Troubleshooting HP article addresses how to work on this issue. When you have completed the alignment process you can see if the problem persists. If so, we can work on addressing that.
An alignment Page prints when the all-in-one is turned on or off or a print job is started
After return your results when you're done the alignment process.
Tags: HP Printers
Similar Questions
-
The deskjet 6980 printer model is compatible with Windows 7 Professional 32-bit update?
I think the upgrade to Windows 7 Professional, 32-bit. I have a printer HP deskjet, model # 6980. This printer is compatible with Windows 7 Professional, upgrade? I also have a HP scanjet 2400, is compatible too?
Hi harypick46,
Yes, the drivers are already included in Windows 7 32 - Bit for the 6980. In regards to the scanjet I'm not find information about the drivers for that old of a scanjet.
-
HP Photosmart D110 printer will not install with Windows Vista?
HP Photosmart D110 printer will not install with Windows Vista?Hello
(1) what happens when you try to install the printer?
(2) you get an error message?
Method 1: You can run the fixit available in the link below and check to see if that makes a difference
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/
You might want to know
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think. -
All-in-one 968 printer won't work with Windows 8
I got the XPS 8500 last week. After hours of trying to figure out the new operating system, I tried to connect my AO 968. Nothing prints. I tried to implement everything. The printer appear in devices and printers, and he says it's working properly. My eye! When a driver will be ready for it?
Hi Lynnt2,
The 968 AIO printer is not compatible with windows OS 8.
Please click here to check the compatibility of printers. http://Dell.to/UMzvYJ
-
Can I use the same printer to print from a pc with windows 10 and a pc with windows 7
* O.t. - printer using windows 7 and 10
Can I use the same printer to print from a pc with windows 10 and a pc with windows 7?
Yes, assuming that there is the compatible drivers for both versions of the OS.
-
Printer HP deskjet 6940 with Windows 7 problem
I have a HP Deskjet 6940 printer that doesn't work with my Windows 7. This can be corrected?
Hello
You will have to install the software of the printer that is compatible with Windows 7.
Go here - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468003&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=468001 and choose the version of Windows 7 you have.
Once you have done this, you should see the instructions and be able to get the software needed for your Deskjet 6940.
Let me know how you go.
Good luck and enjoy Windows 7
JonIf this message was useful and allowed, please consider the vote and it offers as a response...
My Blog - www.insidetheregistry.com
-
My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full. What bad past and how to fix it?
If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783
If all goes well. -
I used Print artist 4.02 with Windows 98 but does not work in Windows 7
I have a copy of the Platinum 4.02 artist Print. It worked with windows 98. Now, I have Window 7 Home Premium and get an error when I try to download the program. What can I do to make this program loaded on my system? P
Artist is up to version 24...
Nothing below Print artist 22 is NOT compatibible with Windows 7.
You need to upgrade to the latest version...
-
The printer does not work with windows 7
Just bought a Samsung R480 today and discovered that my existing printer is not compatible with it. The Setup disk only works with Windows XP and Vista. Samsung R480 running Windows 7 at the moment. I was also considering changing my desktop computer for Windows 7 as well.
So my question is, is it possible to request an another HP installation cd that is compatible with Windows 7? Or I have to buy a new printer that is compatible with Windows 7?
Thank you!
The link below should show the selection of OS for the drivers of J4680c. just click on what version of Windows 7 you have (32-bit or 64-bit), then download it the driver full of features.
-
Unable to print on hp psc 950xi with windows 7
It doesn't seem to be a driver available for this printer with Windows 7.
Device does not show upward toward the top on my list of printers.
All scan functions work fine.
Do I have to buy a new printer?
HP provides no win7 drivers software driver is provided by windows update
-
problem using grayscale on psc 1110 with windows 7 64 bit
Hello
I have a problem with my psc in 1110. Installed on my windows 7 64 bit laptop I can't print using grayscale. If I try to print certain types of documents they appear not printed correctly with the missing lines as if I try to print the colours of setting and lack them. Same problem does not exist if I use the printer for a normal copy using scanner without PC or if I use my printer with an old pc with windows XP. It's a driver issue!
On windows 7 using the HP print and scan doctor I obtein this: http://i.imgur.com/rHGQ56Y.jpg as a result then the software show this: http://i.imgur.com/4sSQRcj.jpg as a result. Grayscale is abset! Please note that I have no color ink.
Suggestions?
Hello
I solved this problem by using a virtual machine with linux mint. Now I can print all documents on grayscale without problems. Thank you HP which obliges me has used this boring solution.
Concerning -
Incompatibility of printer Epson LQ-680 with Windows 7, 64-bit operating system
Incompatibility of the printer Epson LQ-680
I got a new machine (with Windows 7, 64-bit operating system).
Earlier I had been using an Epson LQ-680 with a serial cable.
The new machine has a USB port, so I have to use a USB to PS/2 port.
I installed the Energon USB but still cannot print.
Incompatibility of the printer Epson LQ-680
I got a new machine (with Windows 7, 64-bit operating system).
Earlier I had been using an Epson LQ-680 with a serial cable.
The new machine has a USB port, so I have to use a USB to PS/2 port.
I installed the Energon USB but still cannot print.
I read your post with a lot of attention. There seems to be some confusion on your part. I want to arrempt in order to clarify the information so that a good solution might be found for your needs.
The Epson LQ-680 is a matrix printer with a print head 24 pins. It is designed to use a parallel port. This means that its computer interface conforms to the IEEE 1284 specification. This is often referred to as a Centronics parallel port. Series No.
Thus, because your computer does not have a port for a direct connection, you must use a parallel to USB device.
Not all of these devices are supported printers. Please check the specifications of the device that you use to connect your USB printer and confirm that it supports the printers. It is preferable that it supports bidirectional printing through the device. If it is not the case, getting the arrangements put in place for this printer could be a problem.
Driver for printer:
=================
You did not mention whether your machine is a laptop or computer desk/workstration. If the latter, and if she will allow to install PCI cards or PCI-E, install a parallel port card would work more simply.
If you want other help, please let us know the make and model of the parallel to USB device.
-
Set up a wireless HP all-in-one printer on your desktop with Windows XP Pro Version 5.1 SP3
Recently, I uninstalled Solution Center HP from my desktop PC with Windows XP Pro Version 5.1 SP3. The program worked very well and was connected wireless to my HP Photosmart all-in-One 309 g.
Now, when I downloaded the latest software feature full HP and installed, it has completed the installation but could not connect to the wireless printer. Setting up the wireless printer, he did 'see' the HP 309 g printer and I chose this but it gave me a dialog box saying that there was no installation configuration. I also, tried the control panel "Add Hardware", but he couldn't 'find' the printer. What should I do?
You have an icon for the 309 g Photosmart in Start menu > printers and faxes?
If so, right-click on it, select Properties, and click the Ports tab.
By ensuring NOT to click inside the list, use the scroll bar on the right until you see the line highlighted and verified with the port used for this printer. That said this line in the columns 'Port' and 'Description '?Note that you may need to click and drag on the small vertical line between 'Port' and 'Description' in the header line to make the column wide enough to read the entire entry.
Click Cancel to exit the printer properties dialog box.
-
HP Deskjet PSC 1510: What is my printer HP PSC 1510 Deskjet have memory?
I'm about to throw my Deskjet HP PSC 1510 printer, since I recently bought a new HP printer. The 1510 has a card in there? I used it several times over the years to copy and scan personal information, so I am very concerned to protect my privacy. Please notify.
PSC 1510 has no internal memory that would save personal information once power off...
-
How to make the printer deskjet 3940 compatible with Windows 7 Home Basic, 32-bit?
I have the HP Deskjet 3940 printer. I recently bought a Lenovo (C320, 57-302429) desktop computer that has Windows 7 home basic, 32-bit operating system. The said printer does not work with the computer above. Please guide how to make this printer compatible with the operating system above.
1. click on the Start button, select Control Panel and double-click devices and printers.
2. click on Add a printer.
3. Select Add a local printer.
4. Select an existing Local USBx port, click Next.
5. click on the Windows Update button.
6. once the update is complete, locate the 3940 driver.
7. click on Next,Next,Next,Next,Finish
Maybe you are looking for
-
Delete cookies don't work, one at a time, or remove all. I tried the history and the options screen. They seem to go, but when I go back in that they are all back. What is happening in the latest version which has been updated automatically. bold tex
-
OfficeJet 7612: impression from an email
I print by sending an email to the printer. I want to print only the attachment and not email. Is this possible?
-
Qosmio G30 - need two Windows operating systems: Vista and XP
Hello can someone help me on the following application procedures:I need two operating systems on my Qosmio: Vista and XPI have two drives RAID inside my Qosmio and I installed Vista on the first. I tried to install XP on the second hard drive and I
-
No wireless on Satellite A300 afrer downgrade to Windows XP Home edition
No wireless on Satellite A300 (PSAG0A-02009) after downgrading to Windows XP Home with the CD provided to Toshiba.We have the wireless switch, but we cannot find the driver for the wireless.
-
Is it possible to have on the same external hard drive, my backups time machine and my photos and music? I'm getting low on disk space on my MacBook Pro (2009). My quality is 152,9 GB and I only left 5.75 GB. Thank you