Printer will not connect

Similar Questions

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• Adobe CreatePDF Desktop Printer will not connect

  I tried to print a document online and a my computer word document. Whenever it says my Adobe CreatePDF Desktop Printer will not connect. Help

  Hi anthonyr,.

  The CreatePDF desktop printer has been removed, that's why you are unable to use it. If you wish, you can remove it by following the instructions in this document: Remove create Adobe PDF Desktop printer.

  Best,

  Sara

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• HP 5530 Envy: Would print not; Software reinstalled now printer will not connect

  I printed 2 pages of a document and another need.  When I went back to try to print again, it got stuck and would not take the step to go to HP ePrint.  I tried 2 other times.  Then I cancelled all print jobs 3 and tried to print something different.  Jobs canceled is stuck trying to cancel, and the other document would not print.

  I checked the edits and reinstalled the printer software.  Then I unplugged the printer, and it wouldn't reconnect.

  I uninstalled the software, reinstalled, printer does not connect.

  Restarted the computer, printer does not have to connect.

  I had this problem before, but not for a while.  I guess it's a problem with Windows 10.  I was going to make the resolution of the problems, but it is configured for Windows 8.1.

  I ended up going to the support page for my printer, so the link that you sent in step 3 of solution 1.  I looked through the help desk, but they do not have my problem.  Then, from there, I stopped using these steps and went to the software and drivers link to see if something was missing.  It shows all of the software I have access to, but it is not very clear from this first page on what I actually need to add.  I downloaded the HP Printer Wizard and follow these steps, and now my problem is solved.  However, at the end of step 2, he said that if my printer was connected to the radio, I should stop troubleshooting.

  As I said before, it was not a matter of my printer is not not on my wireless connection.  When I double click the icon of the printer front and selected 'add a new printer' he would not this process.  The wireless never disconnected.  The rest of my computer just not see it.  While I was with the installation wizard, he says that most of the drivers were there but some elements were not, so that solved the problem.

  Thank you for your help.  Although not exactly what I asked, you still have the page that solved my problem.

• Printer will not connect, do not accept access code

  Hello

  I have a HP Officejet 4500 G510n-z.  We have been connected to a wireless network, then moved. We kept our same cable service, etc.  I tried to print from the same computer, but you get the status message that the printer is not connected.  The wireless light is on, I have turned off the power to the printer and the router, on again.  I have checked my router password and have tried several times to enter every other option password we have, but still not wrong password message.  I have Windows Vista and do not know what else to try.  Is there a way to completely circumvent the password option?  Thank you very much!

  Thanks for getting back to me. I have check the router password. I decided to uninstall/reinstall the printer and it is fine now.

• Dell968w printer will not connect to the network.

  It drives me crazy.

  I recently had to change the security key on my DLink router
  But this printer is not connecting
  How do I change or update the connection for the printer wireless?

  Thanks, I'm set. He was simply not connect to router because I changed the security key.

• Want 5540: Blue light blinks and the printer will not connect wireless

  Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

  Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• my printer will not connect to my laptop

  I can't print from my laptop, when I go to print I see my wireless printer, but it appers offline. the internet is turned on and the laptop and printer are both connected to my wifi. I can print from my desktop but not my phone

  any suggestions?

  Hi sarahb12,

  I understand that you can not print wireless now from your laptop to your printer. I'll try my best to help you solve this problem.

  To help you, I need more information.

  1. What is the model number of your printer? LINK: How can I find my model number or product number?

  2. what operating system you run on your computer >

  3. what error messages are you getting?

  If you are running a Windows operating system, then I suggest download and run the HP print and Scan Doctor.

  I hope this helps, let me know.

  Thank you

• HP printer will not connect with the new modem

  I just installed a new modem which has replaced a router and a modem.   But now my Printer (Deskjet j310a) HP does not work.  The window of the poster printer 'Wireless is not connected' shows you settings button choice: Disable wireless. WPS; Default values.  I don't know what to do and would like to return printer.  And before I changed modem, there was a small symbol of bluetooth on the bottom of the screen and it is gone now.  Any ideas?

  Thank you.  I'll try that and I'll let you know if it works for me.

• HP2504 printer will not connect to Wifi

  Install hp 2540printer out of box and put in the ink. IM it works with a mini iPad 2 and one iphone 4S.
  Bought this printer because it is advertised for use with mobile phones and tablets. I downloaded the app eprint and tried to connect to BT Voyager router. Not connecting not can't find the printer message shown

  Hello ellenkev,

  Welcome to the Forums of HP Support!

  I see that you are trying to configure a Deskjet 2540 to work with a couple of Apple devices. This printer is the best Setup on a network with the printing software and a computer, with that said, it can also be done with an iPad.

  Follow the steps I gave here: Re: 2542 Hp.

  Good luck.