Printer will not let me get it online

Similar Questions

• I can't get windows vista at startup I get problem event startupRepair in offline mode and will not let me get on the computer

  When I try to turn on the computer it gives me a message of startup repair. There are a few problem signatures read like this

  The problem StartupRepairOffline event name

  Hi GwenBenson,

  1 have you tried running the Startup Repair tool?

  2. when the problem started?

  3. did you of recent changes to the computer?

  4. are you able to boot in safe mode?

  Method 1:

  Step 1: You can check if you can boot into safe mode.

  Start your computer in safe mode

  Step 2:

  If you can boot into safe mode without any problem, then you can try to perform a restore of the system to a restore point before you have been affected by the problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 2:

  Alternatively, you can try using the last known good configuration and check. It's a Windows startup option that uses the most recent system settings that worked correctly.

  For more information, you can consult the following article:

  Using the last good known Configuration

  Hope this information is useful.

• I am trying to print coupons from a Web site. It says I need I'm trying to install Coupon Activator. Then when I try, I get an error message. It will not let me install on my computer.

  I want to print coupons from my computer.  Activator coupon says I need to install it, when I try to install and run the program I get an error message.

  I am trying to print coupons from a Web site. I try to install Coupon Activator. Then when I try, I get an error message.  It will not let me install on my computer.

  Hi Dustin,

  Thanks for posting. You will have to contact the support for the program in which you can not install. If you encounter problems, install any programs please let us know with the exact error message.

  Thank you!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  Unfortunately, if you have lost the product keys for Microsoft software, you will need to buy new software.  Visit the Microsoft store on genuine Microsoft software.

• I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the paper size selected is not compatible with installed support." Anyone have this problem?

  I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the size selected is not compatible with the installed support." All the answers for this?

  Refer to the discussion: Lightroom v4, v5, v6 Will not print to a DS40 printer

  Kind regards

  Mohit

• Hello, I have a new Mac, I need help to install adobe photoshop c6 I need to install and pay fees I want. but I've been trying and get no days... I had the version of 30 days and will not let me buy him. I NEED FOR MY WORK PLEASE

  Hello, I have a new mac, I need help in installing adobe photoshop cs6, I need to install and to pay the tax. But I've been trying and don't get days, I got 30 days version and will not let me buy it. I need it to work. Please

  Hi the isac,

  You can download Photoshop CS6 from this link: download Creative Suite 6 applications

  You can buy the product from this link: Creative Suite 6

  Kind regards

  Claes

• I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  Hi Daryl

  Please follow: error "You have been disconnected" whenever I try to connect to the Cloud creative office application.

  See if that helps.

  Thank you

  Varun

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to access an application on the website of the Government GOING and that is to say the connection is not approved and will not let me continue, how can I do?

  I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?

  This page opens another page in a frame.
  In such a case, you cannot make an exception.

  • https://vabenefits.VBA.Va.gov/vonapp/default.asp

  This server does not send a certificate chain that ends with a built-in root certificate.

  • http://www.Networking4all.com/en/support/tools/site+check/report/?FQDN=vabenefits.VBA.Va.gov & Protocol = https

  You can open this page in a tab to make it possible to create an exception if you really need access to the site.
  Note that storing a permanent exception should not be.

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

• When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK.

  This has just begun. When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK. When I say OK and restart Firefox all my tabs go :-( This happens every time now. I know how to recover my old tabs but whenever I close Firefox it always warns me that I'm closing multiple tabs.

  Tanks for help getting Firefox working properly again
  Jim

  Do not use 'Clear history of Firefox closing' to clear the 'browsing history '.

  • Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Using the "Show my windows and tabs from last time" is a more reliable way to restore the session data.

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• E-all-in-one HPOfficejet 8600Pro printer will not now speak to iMac since updates Driver & Maverick

  I just bought a new HP printer and set up on my iMac to print. After a LOT of messing around FINALLY got it works, BUT a day later upgrades arrived to update my iOS X 10.9.3 with a simultaneous upgrade of the software driver for the printer. I duly installed at once – but now, regardless of what I do the printer will not work. The computer can be seen as it is showing ink etc. levels and said he printed and I can print test pages, but it has not allowed me to print from Word, Excel, Web or PDF!  I tried to uninstall the printer drivers and reinstall those of the HP Web, which I suppose would be the 'old' - but still no luck. I need this job and am close to tears - any help would be appreciated. I also tried deleting and reinstalling Office for Mac... NB it prints beautifully and effortlessly to my husband's PC.

  Welcome to the LAG54 forums,

  I saw your post about not being able to use the printer completely after a few updates. I will do my best to help you with this!

  First, try the following steps:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your computer
  4. Add the printer: full function and driver-OS X 10.9 Mavericks software

  I hope that does the trick! Let me know the results!

  Have a great Tuesday

• I'm trying to import my IE Favorites and have read the instructions on how to do it, but the import button in the file in gray and will not let me import. Any ideas?

  I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?

  Try using the import option in the Bookmark Manager (also known as the name of the library)

  1. In Firefox, select the bookmarks menu, then "organize bookmarks" open library
  2. In the library, select "Import and backup" then "Import HTML.
  3. You should get I hope that the ability to import from Internet Explorer.

• Printe will not print. Says that 'the printer door is open', but no door is open

  Printe will not print.  Says that 'the printer door is open', but no door is open

  Hi ElliotBrahms,

  1. What is the brand and model of the printer?
  2. what operating system is installed on the computer?
  3. you have made no changes to the computer before the broadcast took place?
  4. when exactly you get this error message?
  5. What is the exact error message you get?

  Method 1
  Try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2
  Try the steps from the following link:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems