Printers HP j4680 all-in-one: report of transmission J4680

Similar Questions

• Photosmart C4580 all-in-One report of a paper jam. My C4580 keeps showing an error report "paper jam".

  My C4580 continues to show a 'Paper jam' error report after starting upwards.  The cartridge carriage moves to the left.  The trolley is entirely free to move and there is no resistance when moved to the far left and far right.  I have followed closely all the help online that I can find on the website of HP, and nothing has solved this problem.

  Can anyone offer a solution?

  Thank you in advance.

  A true and false paper jam troubleshooting - will be performed in the same way.  Therefore, an area that is difficult to see and easy to Miss completely on the right inside the printer.  Make sure that it is not a small amount of paper caught on the right side of the print head.

  Also, check the steps in the document is located here.

  Let me know how it goes.

• printers HP e-all-in-one envy 114

  Hi, we just bought this printer with our new iMac and implemented. My question is that, once it goes into sleep/power off mode mode I find that when I try to print it doesn't let me unless I go to the printer and turn it on physically. Is there a way to put him in place to be in a mode standby in which case when I hit print automatically turns on and prints, and I don't have to go and turn it on? Any help would be much appreciated. Thank you

  The thing is, the printer is supposed to "wake up" when a print job is sent to it.  I suspect that the printer makes loses the network connection when it goes into sleep mode, then the off timer is activated so he died.  The printer should not turn off completely when it is connected to a wireless network and that's what makes me suspect that it loses the connection.

  Strangely enough, setting a static IP address can help with this.

  1. tap the wireless at the top of the screen of the printer and press info print to print a Network Setup page.

  2. on a computer, enter the printer's IP address in a web browser as if you went to a site.

  3. the printer status page should load.  Click network in the upper part.

  4. click on networking on the left.

  5. click on the network address (IP) on the left.

  6. by default, it is on automatic IP.  Replace this manual IP and all fields must become editable and empty.

  7. click on suggest a manual IP address and it sh ould popular the first 3 sets of fields.

  8. get the network page printed in step 1.  Verify that the default manual and subnet mask is the same.  Check that the 3 first sets of numbers in the IP address field are the same as the IP address on the print.  For example, 192.168.1.50 is located on the page, and the 192.168.1.243 is on the settings page (the last number can be different as long as it isn't a 0 or a 255).

  9. Enter for the preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.

  10. click on apply.  After a few moments, you should get a success message.  When you do, close the browser page and power turned off the printer for 30 seconds and then turn back (this will force the new settings to take effect).

  At this point, the printer has a static IP address and it should maintain communication to the printer Open even in mode 'sleep'.

• Printers HP 8630 (all-in-one): ON HP 8630 is there a quick way to print from the paper locked tray (using a Mac)?

  ON theHP is 8630 printer a quick way to print from the paper locked tray (using a Mac)?  I normally print from tray 2 and special letterhead in a status bar.  It would be nice to choose letterhead in Tray 1 at time of printing without having to reset the printer manually.  Is there a way?   Jim1949

  Hi @James1949,

  The application, click file and then click on print.

• Solution for "Spooler service does not" with printers HP F4480 all-in-one.

  If you receive the prompt that says: "cannot install or print due to 'queue service does not work', here is a simple solution.»

  GO to the start menu and click on 'run '.

  Type CMD, and then click OK

  Type in the box that appears, "net start spooler" and click ENTER.

  NOTE: Without quotes and spaces between net start spooler.

  The box invites you... spooler is now in service.  The printer should now work correctly.

  Great information.

• Printers HP e-all-in-one, 4622. Does not print the page of the website.

  Windows XP.  Starting yesterday will not print page of the website.  Cannot print My Documents.  Get the message "an error has occurred in printing".  The following screen shows "save the file under...". ».  Have you tried another USB port and a computer restore to earlier date - nothing works.

  Greetings! Welcome to the Donaldsan forums

  I read your post about how you cannot print from a Web page. You are able to correctly print your documents, that shows us that the printer hardware is correct.

  I suggest that you try to print from a web browser that is different to see if that helps. If this does not work, the problem may come from this Web page that you are printing from.

  You can also run the print and Scan Doctor to fix problems printing or scanning.

  I hope that helps!

  Have a nice day

• printers HP e-all-in-one envy 4500

  I have a macbook osx 10.5.8 is anyway for me to establish this printer with this computer?

  Not with the HP software, however, you can try this 3rd HPIJS driver:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs

• Windows 8 Solutions for Laserjet, MFP printers, all-in-One and Scanjets

  To help customers to use their products with Windows 8 successfully, HP has identified the drivers recommended by product. Please see the following support documents for more information:

   

  LaserJet - printers, multifunction and all-in-one devices supported in Windows 8

  LaserJet and Color LaserJet - produced with care delayed in Windows 8

  ScanJet - Scanners supported in Windows 8

  LaserJet and Color LaserJet - printers, taken in charge or with limited Windows 8 Support

  LaserJet Color LaserJet and LaserJet AiOs/Multifunction - products not supported in Windows 8

  If you have a problem with the installation of your printer from Windows 8, please start a new thread and include your printer in the title of your post. Please, do not respond to this post. As new help documents are available, they will be posted on this subject.

  If the resources above do not meet your needs/questions or you need additional assistance, please visit:

  Additional resources that are available to help customers with their LaserJet printers, multifunction and all-in-one include:

  HP LaserJet and multifunction and each Color LaserJet - printers install the driver included in Windows 8 or Windows Update

• Pro Tips: Troubleshooting scan to E-mail questions in e-all-in-one printers and ePrint

  Hello e-all-in-one printer users,.

  If you're reading this, chances are you have a problem of webservices in your HP e-all-in-one printer. If you can not scan to e-mail, use ePrint, or get a code application, this post is for you.

  Many of later vintage (2010 and beyond) Photosmart, ENVY and Officejet series e-all-in-one printers share the same Web services and Wireless features. Within these series printer, you can enable wireless and Web services (ePrint, scan to e-mail, printable sheets) connectivity of the façade do their installation for use with Android, Windows, iOS, Macand Chrome OS much simpler than the old printer models. Of course, when things go wrong or there is confusion about the use of the printer and features such as printing and scanning to e-mail stop working, the correction of these problems is the same in most of the models.

  WebServices are not connected: what affects?

  When the webservices connectivity is lost ePrint, scan to e-mailand pads features will stop working. If you are just getting started with the installation of your printer, the inability to generate a code application (to add your connected HP printer or sign in to Instant ink) can be attributed to not being able to afford Web services. If you are affected by any of these questions, read on. I have some suggestions that might help.

  Ordinary remedies

  • Before set you Web services, make sure that your printer is connected to a network, either via an ethernet cable or Wirelessconnection. Print a report of Network Configuration of your printer front panel (usually this is located under Tools / reports) to confirm an active ethernet connection.
  • If you are connected wireless, touch the wireless icon printer . If you see as connected and there is an IP addresses starting with 192.168... or, 10 grand. If this isn't the case, run the Wireless Setup Wizard to connect you with your network name (SSID) and enter the password wireless you are prompted.
  • Ensure that the date and time your printer settings are correct. You can check and adjust this via the front panel of the printer in most cases and trivia: the printer Web server integrated.
  • Now, with network connectivity guaranteed webservices icon or (depending on model) and try to activate Web services.
  • If you have managed to connect and a leaflet printed, or at the very least, an [email protected] address is displayed on the front panel of the printer, perfect, Web services are now functional. This means that you can now ask your HP printer connected , or use one of the above characteristics *.

  Note that ePrint and scan to e-mail feature are addressed later in this post if you still need help with these functions.

  • If the webservices are always not, try your printer restore default*.

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom @hpeprint.com address that it will be permanently deleted. For more information on custom addresses ePrint, click here.

  Here's how:

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings
  • Note this new printer may contain this setting under the heading maintenance of the printer instead of tools.

  Then, to reconnect to your network (wired or wireless) and try to set a manual DNS:

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer), and then press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  Then, press the icon of Webservices or and reactivate your webservices (required for scanning to E-mail, ePrint , and other functions).

  Then, if a scan to e-mail question has led you to this position, tap the scan icon and enter the email address that you want to scan to.  Then, recover the PIN code that you should automatically receive by e-mail and complete your scan to E-mail setup by entering this PIN code in your printer.  Ideally, if you are able to get this good service will be fully functional.

  Alternatively, if ePrint is your main problem and all the above (except for scanning to E-mail steps) suggestions worked, try emailing your printer a print job. If it prints correctly, ePrint is back online. If you are a user of HP ePrint app, the app did automatically detect your printer? If not, go to the application settings and manually add your printer to the app using either ask you code or IP address of the printer. Finally, if you're a printable, user use your favorite applications on the front panel of the printer, or via HP connected.

  There are advanced troubleshooting steps beyond what I posted here and you can find them in the Forum such as displayed by the employees, Experts and members of the community. Start with the basics and if you still can't not to take advantage of Web services from your printer don't be shy to reach out - HP Support Forum's is a great place to exchange ideas and help each other to get the most out of our products.

  Thank you for taking the time to read. If you have any questions or comments do not hesitate to answer.

  All the best,

  Greetings,

  All new users to check in this thread, the first and the main post is a practical resource for webservices connectivity solutions.

  Try all the steps to recommend, as appropriate - if you encounter any problems apart from this I'll be happy to help you.

  Kind regards

• All-in-one Officejet J4680: how to set scan to scan the document without cropping afterwards

  Is it possible to configure the scanner so that when I scan a document, the digital space includes only the document itself and not the whole scan bed? In its current form, I have to crop each document to remove the excessive scanning area that is not part of the document.

  @JonnD14

  Install the software of full functionality for the printer.

  Printer:

  Range of all-in-one printers, HP Officejet J4680

  Full software features:

  File name: OJJ4600_Full_14.exe

• All-in-one HP Officejet J4680: compatible MICR of ink/HP Officejet J4680 printer all in one

  I HAVE A HP OFFICEJET J4680 PRINTER ALL-IN-ONE. I NEED TO BUY A MAGNETIC INK TO RUN PAYROLL AND ACCEPTS PERSONAL CHECKS.

  1. THIS PRINTER ALLOWS THE MAGNETIC INK?

  2. IF NOT IS THERE A COMPATIBLE AVAILABLE FOR THIS MODEL AND THIS MODEL MICR INK ACTUALLY SUPPORTS COMPATIBLE INK?

  3. WHERE DO YOU BUY COMPATIBLE INK / MAGNETIC INK AND MAGNETIC PRINTERS?

  I CALLED THE LOCAL OFFICE SUPPLY STORES AND THEY DON'T SEEM TO BE FAMILIAR WITH EITHER.

  Thank you

  Hi @nola398 and welcome to the Forums of HP!

  I see that you are looking in magnetic ink.

  Magnetic ink is not something HP offer, so I can't really talk about its compatibility.  You can, however, give us a call and see what additional information are available.  You can use this website to find out how to contact us in an appropriate way, based on your region:

  Contact HP worldwide

  Thanks for posting on the HP Forums!

• J4680 all-in-one and 4315 all-in-one

  I have a 64 bit Vista Home Premium Toshiba laptop connected wireless to a HP j4685. In another part of the House, I have a Compaq F750US laptop plugged into a 4315 all-in-one.

  My understanding is that HP offer no Driver printer until January. Apparently, the driver of Windows 7 proposed in the workaround HP will work with the Compaq and 4315 since it is a wired connection. But if I read workaround, I'm out of luck with the connection between the Toshiba laptop and the j4685 wireless.

  Anyone used workaround to print/fax and photocopying? I must learn to several people to use the two computer-printer combinations. Is it easy to use for the print/fax/copy?

  Thank you.

  I don't know if the J4680 has the particularity of webscan. Try accessing embedded web page printers using his IP address and check on the left for a link named Webscan. Alternatively, download and install the complete software for the J4680 using the link below.

  Click here

• Jet J4680 office printer all in one

  I can print air to the Office Jet J4680 printer all-in-one.   It's wireless.

  Hello

  Printers supported for cloud services can be found in the link below.

  http://support.HP.com/us-en/document/c02814760

  To use airprint with printers unchecked will find the link below.

  http://support.HP.com/us-en/document/c02775166

• HP All In One Deskjet 3520 Microsoft Report Errorr

  HP All In One Deskjet 3520 error - I have Windows XP and every time I try to print (if, since an application, Internet or serigraphy, I get: XXX program has encountered a problem and needs to close - sorry for the inconvenience.) Send the report. I uninstalled and re-installed the printer twice - what happens?

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• All-in-one HP Photosmart 3310: 2 HP inkjet printers different... same problem

  The time which was formerly set via the network apparently to I remember ever setting the time on one or the other. Today, I noticed for the first time that both of the printer are turned off as follows:

  HP Photosmart 3310 all-in-One - Time is 19:43 locally the printer indicates 19:12 (thirty minutes slow).

  HP Photosmart Premium Fax C309a series - time is 19:43 locally the printer indicates 19:35 (slow 8 minutes).

  Two of these printers previously seemed auto-sync the time on the display panel. Is it possible that my ISP has started to block the NTP port or something?

  Hmm, no, I just connected to 0.pool.ntp.org via ntpdate on my linux machine, and he was not blocked. So it's something on these printers has gone wobbly.

  Hi @tcagle53,

  Thanks for joining the Forums of HP Support with your request for time to printer.

  I understand that you have 2 printers and a HP Photosmart 3310 HP Photosmart Premium Fax, and each printer is showing incorrect. I would like to help.

  The printer usually have the user set the time and Date when the printer is in the configuration. Sometimes things like power outages or to unplug the printer can cause time to read properly.

  You can set the time to the correct time using the printer control panel.

  To set the time on the HP Photosmart 3310 device:

  

  To set the time on the HP Photosmart Premium Fax:

  1. press on the installation program button.

  2. press the button arrow down to select Preferencesand then press OK.

  3. press the down arrow button to select the Date and timeand press OK.

  I was not aware of the printers synchronization automatically at the time of the computer, but sometimes the built-in Web server (EWS of the printer) will have a setting "Synchronize with the time on the PC" that can be selected if the printer is used on a network.

  

  Once the built-in Web server is in charge there should be a tab somewhere near the top of the window.  If you click on Date and time parameters should be able to be selected on the left side. If the sync option of the printer with the computer time is available it usually a checkbox to check before you click apply. Printer not all have this option.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!