printers HP e-all-in-one envy 4500

Similar Questions

• Want to 4500 all-in-one: Envy 4500 scanner on the internet

  At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

  But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

  Is it possible to scan a document on the internet?

  My phone app it won't unless it is connected to the same WiFi network as the printer.

  Ric

  Hello

  IAM afraid to said that the analysis can be done on the internet.

  The Mobile/PC device should be on the same network for the scan to occur.

• printers HP e-all-in-one envy 114

  Hi, we just bought this printer with our new iMac and implemented. My question is that, once it goes into sleep/power off mode mode I find that when I try to print it doesn't let me unless I go to the printer and turn it on physically. Is there a way to put him in place to be in a mode standby in which case when I hit print automatically turns on and prints, and I don't have to go and turn it on? Any help would be much appreciated. Thank you

  The thing is, the printer is supposed to "wake up" when a print job is sent to it.  I suspect that the printer makes loses the network connection when it goes into sleep mode, then the off timer is activated so he died.  The printer should not turn off completely when it is connected to a wireless network and that's what makes me suspect that it loses the connection.

  Strangely enough, setting a static IP address can help with this.

  1. tap the wireless at the top of the screen of the printer and press info print to print a Network Setup page.

  2. on a computer, enter the printer's IP address in a web browser as if you went to a site.

  3. the printer status page should load.  Click network in the upper part.

  4. click on networking on the left.

  5. click on the network address (IP) on the left.

  6. by default, it is on automatic IP.  Replace this manual IP and all fields must become editable and empty.

  7. click on suggest a manual IP address and it sh ould popular the first 3 sets of fields.

  8. get the network page printed in step 1.  Verify that the default manual and subnet mask is the same.  Check that the 3 first sets of numbers in the IP address field are the same as the IP address on the print.  For example, 192.168.1.50 is located on the page, and the 192.168.1.243 is on the settings page (the last number can be different as long as it isn't a 0 or a 255).

  9. Enter for the preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.

  10. click on apply.  After a few moments, you should get a success message.  When you do, close the browser page and power turned off the printer for 30 seconds and then turn back (this will force the new settings to take effect).

  At this point, the printer has a static IP address and it should maintain communication to the printer Open even in mode 'sleep'.

• HP ENVY 4500 all-in-one: ENVY 4500 advance Options

  How to add or remove in the menu the paper size set in the Advanced Options screen?

  Hello

  You cannot delete but you can add custom formats. This can change when you change your computer, change OS, re - install the driver. Printer driver keep his list by default only.

  Kind regards.

• HP 4500 All In One Envy... Print from the cartridge color only when black ink is low...

  Is it possible to print with the cartridge color only if the black cartridge is low or outside? I have the HP Envy 4500 e All in One... What can I do?

  Hello

  You can use the color ink only by removing the small black cartridge.

  You can find the next steps in his guide of the user as a reference:

  Use single-cartridge
  
  Use single-cartridge use the HP ENVY 4500 series with only one cartridge. The
  
  mode Single-cartridge begins when an ink cartridge is removed from the distribution of ink cartridges.
  
       
       on the printer screen.

  Shlomi

• HP 4500 all in one envy: HP Envy 4500 and el capitan

  Y at - it a update for the HP Envy 4500 all-in-one for El Capitan? Don't want to upgrade the operating system until there is one.

  Yes,

  The printer can be installed via Apple Software Update.

  Follow these steps to install its drivers via ASU:

  http://support.HP.com/IE-en/document/c04510394

  Then install the HP Easy Scan application that adds full functionality for your printer:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi

• ENVY 4500 e-All-in-One-Series: 4500 want don't scan text to produce a searchable PDF file

  I used to have a printer Photosmart 4400 C that would allow me to scan to produce searchable PDF files, i.e. I could select letters or words in a text selection tool in my PDF reader.   Today, I just bought a DESIRE 4500 e-All-in-One-Series.  It will scan only text to give me a graphic PDF that is not searchable.  I've updated to the latest version of the EN4500_198.exe driver, but it does not help.

  Does anyone have a solution?

  Hello

  No, the 4500 desire doesn't have any default OCR software, you will have to pay for the software and believe it or not, that the software is more expensive than the printer itself. You can buy the software or you can try to use some free software around:

  http://www.techsupportalert.com/best-free-OCR-software.htm

  Kind regards

• All-in-one series 4500: 4500 shortcuts "printer" - padlocks on each watch envy

  "Printer shortcuts" for this desire all-in-one show lock. What they mean and how do I get the lock?

  Hello

  The padlocks are predefined options.

  If you change any one of the options right side, as the type of paper etc, a custom shortcut is created.

• HP Envy 5530 e-all-in-one: envy 5530 E cannot detect alignment page

  I'll put up a new e-all-in-one printer HP Envy 5530. I went through the installation OK, until I got to the part about the alignment of the print cartridges.  It prints the alignment page, it will copy even, so I know the scanner works. I printed several pages and they all look great.  But when I use the ink cartridge alignment tool it does not detect the alignment page in the scanner.

  Yes, it is face down on the scanner

  Yes, the cartridges are installed OK

  Yes, printing seems good

  Yes, the scanner can scan and print pages, even the alignment page

  What else to try?

  Thank you

  Well, too bad. I unplugged, moved the card to a regular wall outlet instead of a power strip, and it is turned on, ask to do a print alignment.

  I did, it printed the page, I put the page on the scanner and it completed the alignment.

  I don't know what the problem was earlier, but it worked this time.

• ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm

  Difficulties that the printer will not accept 250 gsm paper past the printhead.

  Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.

  I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?

  Thanks in advance.

  Welcome to the @noxasforums.

  I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.

  Let me know what happens!

  • HP ENVY 100 (D410) and 110 (D411) e-all-in-One Printer Series - 'in paper' Error Message displayed the ENVY and the printer isn't looking upwards or the paper feed

  Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.

  

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Printers HP j4680 all-in-one: report of transmission J4680

  I have a HP j4680 all-in-one printer and am running Windows 7.  I no longer receive the audit reports of transmission when I send a fax.  I received of these reports, but for some reason any printer no longer prints this form after the fax is sent.

  Hello @Basha2,

  Welcome to the HP Forums!

  I hope you have a pleasant experience here.

  I want to help you with the confirmation report of fax on printer all-in-one HP Officejet J4680.

  I don't know why it would stop printing. Did you do any sort of reset of the printer? Or make changes to your configuration? Either way, here are the steps to make sure that it is turned on:

  1. On the Panel of your printer, tap the Setup button (it looks like a key).
  2. Press the right arrow until you see print the report to the screen. Press OK.
  3. Press the right arrow until you see Fax of Confirmation on the screen. Press OK.
  4. Press OK when you see IT, on the screen.

  I hope this helps!

  

• HP 4500 all in one envy

  Hello..

  Is it possible to make a print from my ipad or iphone in black and white...?

  Concerning

  Kirsten Jensen Bach

  Denmark

  Hello

  Please do not use AirPrint, use HP ePrint app to print, it will allow you to print B & W. You can install HP ePrint at Apple Store, it's free.

  Kind regards.

• All-in-one Officejet 4500 G510n of error messages

  OfficeJet 4500 all-in-in-one G510n installed OK. Windows Vista. From time to time to get the computer false error messages - incompatible cartridges / Fax memory full / align cartridges / Paper Jam. Neither of which is correct. printer continues to print but the postings repeatedly. Any suggestions?

  Hi GEO,

  Is the only computer that has this problem?

  What happens when it is installed on a different computer?

  How do you have it connected to the computer?

  HP has designed a quick and easy tool that diagnoses and solves many problems of hardware: the HP diagnostic utility hardware. These hardware issues can prevent printing, scanning or copying. HP recommends that you download and install the Diagnostic Utility material at any time that you need to solve a hardware problem.

  I would like to know what are the errors you receive?

  Hardware Diagnostic Utility

• Want 7640 printer all-in-one: Envy 7640 Wnidows 10 teacher 64-bit wireless configuration

  On the occasion of the installation wireless worked. However, every time there is an update to Windows or the DSL router is restarted the printer converts fax only or is not at all.  In 20 years I never found such a little messy feature.  Latest version of the software downloaded to the printer HP (full version), uninstalled all HP printer software, run Registry eval and cleaned up all references to the HP printer.  Restarted PC and printer.  With the help of the installation on the PC window I have reset default and then set up wireless for my LAN wireless option.  He finds an IP address on the local network.

  When I ran Setup complete, concludes that the starting unit to address IP and then dish moved.  A cut a firewall protection and virus.  Good God!  I can't believe that HP could not do better than that!

  It's hilarious.  Here's how it works.  Abandon the software HP Envy 7640.  Better, we can say is that it is lame.  Using Windows 10 ability to locate a network device and add it.  After days of fighting with the software really badly written that's all it took!

• HP all-in-one officer 4500 Wireless

  When I try and install the software and drivers it crashes after I check the tab wireless on my new MAc PRo, it will work with the usb but I can't get the wireless software to implement.

  Because no drivers for Yosemite and comprehensive features for the 4500 wireless software, you will not be able to use the software to configure the wireless. Instead, you will need to run the wizard of wireless configuration directly from the front of the printer, then add the printer to your system preferences.

  On the front panel of the printer, press the small key (setup) button), then the arrow on the wireless menu. In the wireless menu, touch Wireless Setup Wizard and select your network when it appears. Once you enter the network password and the printer to connect to it, you can then add the printer to the computer.

  When you add the printer, please ensure that you use the HP driver.

  1. Select Add another printer or Scanner
  2. Select the printer that you add, and next to the 'use', you can the printer driver

  You find the FAQ section in the following document. HP printers supported in OS X v10.10 Yosemite