Printing blank pages to 5515 HP all-in-one (cartridges have been replaced - HP 364)

Similar Questions

• my hp officejet 6500 e710n print not clear. all cartridges have been replaced.

  My new printer does not print in color.  The color cartridges have been replaced twice.

  Hi kirbydog,

  Try the following steps below.

  Step 1: Make sure that the cartridges are properly ventilated

  1. Press the power button ( ) to activate the product.

• HP Office Jet all in one J4680 printing blank pages

  Never had a problem with this device, so far. Purchased in 2010, I think that using Mac OS. All of a sudden printing blank pages.

  I'm sorry that you have problems with the printer, printing blank pages.

  Try to print a self-test page or the printer in the printer itself status report. It print?

  Try to perform a hard reset on the printer. Unplug the power cord at the back. Leave for 30 seconds and plug it back.

• HP Officejet 6300 - printing blank pages...?

  Hello world

  I have a HP Officejet 6300 that I installed the ink successfully and aligned cartridges but when printing its just empty pages... Ive done a clean place and that made no difference.

  One thing is that the color innk cartridge is empty but the black ink cartridge is full... I gave instructions to print in gray scale, assuming one would use the black ink cartridge...

  For some reason if I remove the empty color cartridge the printer displays the ink cartridge missing message... ghoulish I on increase this?

  Any advice will be greatly appreciated.

  Concerning

  Natalie

  I'm sorry you have a problem with the printer, printing blank pages.

  No, there is no way you can replace the error message.

  Most printers will not work without all the cartrides with ink.

  Color cartridges mix with black to make a true black color. It is an older model of printer. Some older printers can print without the color cartridges. Not sure if this is one of them.

• Printing blank pages and after having tried all the solutions in the solutions of HP

  Hello

  I print blank pages.  I tried to clean the printhead several times, and I've tried to unplug, Plug and waited 10, 20 or 30 seconds several times.  Nothing has worked.  Is there anything else I should try?

  Hello

  Cleaning print head for 3 times and then try to make the COLOR copy.

  If the printer still print the blank Page, then it could be the problem with the print head, where to call HP Tech Support (US) - 1-800-474-6836

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• Firefox will display PDF files, but prints blank pages. Other browsers are fine, safe mode has no effect.

  Currently on a laptop HP, Win8, print on a HP Color Laser, no previous problem. all of a sudden, PDF print blank pages. I can see the fine page. Safe mode without addons has no change. I printed my taxes and had no problems.

  I have used IE (shudder) have a print PDF of fine. I have no software PDF itself on the computer, simply by using the native support of browsers. EXTREMELY FRUSTRATING. Research shows PDF loading problems, but my problem is printing to PDF. Using the 29 of Firefox version. Anyone got tips or clues how this track? Very close to the introduction of my computer to Mr. sledgehammer.

  Firefox 29.0.1 has been published, which contains a fix for this issue - an update is recommended for all those affected: Firefox update to the latest version

• 6500 accepts the print job, but prints blank pages - even in copy mode

  6500 accepts the print job, but prints blank pages - even for copies. Printer ink is full.

  WOW! At least temporarily, my solution is press Setup (the key) right arrow to TOOLS #6 tab. type OK.
  Tab (# 2) clean the print head. Hit OK. If all goes well, take a step back, let the process and be surprised. A second test may be necessary.
  It works at least for a day. Maybe it's your solution.  Jesus is our only hope!

• Photosmart 6510: photosmart 6510 prints blank pages

  Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

  Hi @mjohns390,

  I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

  If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

  This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

  Once you get to the clock at 3:20 minutes, you can stop this video.

  Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

  This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

  If you have completed all the above steps and your product still has a problem, service the product.

  I hope this helps. Let me know how make you out. Thank you.

• Photos martignetti 6520 past the test print then prints blank pages

  Smart photo 6520 connected to Microsoft Surface running as Windows 10 prints blank pages. Have reloaded driver - assists print test, but all applications print blank pages.

  Well, this document describes How to solve print quality problems with your printer. If after the document, you still can not print correctly, the printer or cartridge should be replaced. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• my brother mfc-j410w printer prints blank pages

  my brother mfc-j410w printer prints blank pages... What can I do?

  Hi vitavm9,.

  · Do you remember all the recent changes on the computer before the show?

  · This happens when you print with a particular application?

  · What is the service pack installed?

  · When you print preview the page what is the situation?

  You can run the troubleshooter printer from the link below and check off the results: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/

  See also: http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/000100/000017/faq000117_001.html?reg=us&c=us_ot&lang=en&prod=mfcj410w_us&Cat=112

  With regard to:

  Samhrutha G S - Microsoft technical support.

• L7780: L7780 Officejet prints blank pages

  Printer was not print all the lines on the page. Heads of printer cleaned without result. I tried aligning the printer heads and received a failure indication. Tried to print a report of the printer and a printed blank page.

  Hello

  Follow these steps to identify that it causes, such:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-L7000-All-in-one-printer-series/3601421/model/2511716/document/c01957673/

  Such could happen the cartridges, one or both the printerhads or the printer hardware.

  In addition, what are the ink levels shown on the screen or the software?

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-L7000-All-in-one-printer-series/3601421/model/2511716/document/c00841570/

• photosmart HP 6520 printing blank pages

  As soon as the printer turns on, it prints blank pages and does not stop until you cancel on the printer. After 30 seconds or more, it starts to do the same thing again until you cancel print.  nothing appears on the computer that is waiting for printing or printing.  the printer is connected to the computer via usb. Ive tried to restart the computer and the printer and do a factory reset of the printer.

  Hi @jim_tuck89

  What operating system and version do you have? Mac or Windows?

  If you have a Windows operating system, start printing HP and doctor Scan. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  I can't wait to hear back on your part.

• OfficeJet 6700 Premium only print blank pages

  My Officejet 6700 Premium printer is only printing blank pages. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  I can understand how frustrating. Your printer has built in the printhead. To improve the quality, the only step that I recommend is the cleaning of the print head. Please try to contact HP technical support to see what options you have. Click here to read: worldwide Contact HP.

  Good luck.

• HP photosmart Plus B210 series - prints blank pages

  Hello, I got the printer above for about 4 years with no problems. He suddenly started printing blank pages. I went through all the cleaning cycles, alignment etc., but without success. I bought a new genuine HP print head and installed new cartridges and still once, it prints blank pages. The message I get is that alignment process has failed. Does this mean the printer is down and I'll have to buy a new one, or can you suggest a solution? I went through all the steps suggested for this type of printer on your forum, but I still get blank pages. It is a disaster for me and my wife whose work depends on the network printer. Any suggestion would be appreciated. Thank you.

  Hi @drbince,

  Given you have changed the print head and the problem persists, according to me, maybe it's time to consider a replacement printer.

  Alignment is a failure because the printer does not black. If you have followed all the steps in the following document, it might be time to give us a call to weigh your replacement options: HP Photosmart Plus B210 printer - color or black ink not print.

  If the problem persists, what you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

• DeskJet 3845 prints blank pages

  I got the Deskjet 3845 printer for 6 years and I have not used for 1.5 years. I tried to get going again and every time I try to print, it prints blank pages. I just bought a new black ink cartridge and I removed the light orange Ribbon. I have Windows 8 and it's an old printer, so I don't know if it's a compatibility issue. I used printing HP and doctor scan and it said my printer was ok. However, when I printed a test page, it was empty. I'm totally stumped and I appreciate any help!

  All the best,

  Kyle

  I'm sorry you have a problem with the printing of blank pages. It seems you have the problem of material with the cartridges or the printhead. More he to sit upwards and not in use, the cartridges and printheads can dry out.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01892627

  '"Click the WHITE STAR if you want to say thank YOU" '

  Let me know if it helps.