printing, but no work is out

Similar Questions

• LexmarkX1270 of acts that it was printing but the paper comes out blank.

  Since the installation of a new black cartridge in the printer, it works as it was printing but the paper comes out blank.  I tried to reinstall the drivers of cleaning cartridge.

  Let us know what happens after you try with another cartridge.

• Satellite C70D-A-111 - cannot print using network printer but the work of USB connection

  I added this Satellite C70D-A-111 to an existing network that includes a printer.
  Other devices can print OK but not this Toshiba.
  The message is "printer is in an error state.

  If I connect the Toshiba to the printer via the USB port, it prints OK.

  Can someone point me in the right direction please?

  Do you use this printer at home or in your business?
  I mean if use you it in your business ask for administrator assistance system.

• Print CD work is not on C309A Photosmart all-in-one on Mac OS x Lion, but the works of PC.

  HP Photosmart Premioum all-in-one C309A works very well - is wired to the Mac with USB, works PC wirelessl.  Tried to print from Mac CDs and had no drop down menu for the CD option.  Fingered and finally did print from the PC.  Everything, including the 26 April 2012 updates HP for Mac users have reinstalled and could go down drop with CD option - looking, but then print a live project and no longer displayed option.  In fact, he goes out to tell me that the CD print option is not available from the printer, but it works of course easily to PC wireless connection.  I'll keep fiddling with, but someone has experienced this problem and found what is the solution?

  Ok.  I think that we are in business.  I tried the second links you sent.  I make sure to choose the right printer in the list 'Create' and although he expressly told me that "the currently selected printer does not support a direct printing on a CD or DVD", I continue, select a picture or an image, she puts in on paper, but in the form of a CD.  Here, I have to go to the "Page layout" and make sure that I chose the right printer (IE, not the installed fax C309A machine somehow namesake) and I can select CD on the menu drop down and it prints correctly when I send to print.  All the good sport that I guess.   You don't have a lot of different versions to follow and adapt and software updates.  I am pleased to have been able to solve this problem with your help.  Thank you.  If I have other problems, I'll post them on this forum.

• OfficeJet 4360: Hp officejet 4360 does not print but all the test prints come out perfect

  All of the test pages come out perfectly, but when I try to print a document, it will pull the paper through and seem as if it will print but the page comes out blank. Then, in a software, I for planning, when I try to print, it will print the form without the personal information that I entered into the form. Any suggestions as to what can happen and how to fix it?

  You have been correct is the question.  I'm actually the 4632.  All the test pages are out happening without any problem.  I did all the checks, including levels of ink... actually, what was the first thing I did.  Well, when nothing else was not working, I decided to install a new black ink cartridge.  That was the problem.  As simple as that.  Thank you for your willingness to help.

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• officejet3830: the printer doesn't work; ink, the correct settings, acts like printing, but the result is white paper

  Printer owner exactly six months and worked well.  I have not changed the settings; still has ink in the cartridge; Do a test print - no problem; the cables and all connected.  I click on print to the screen and the printer works and acts like it is printing, but the result when it's over is just blank paper.  I tried other print jobs and got the same result - white paper

  I connected the cables on another computer and got the same results. What could be the problem?

  Welcome to the HP Forums, I hope that you are @lesleyco,

  I came across your post about the printing of the white pages of your Officejet 3830 problem, and I wanted to tender hand for help.

  Try the following steps please: impressions Printer Blank Page or not printing black or color ink

  If pages continue to print Virgin, contact HP to discuss a replacement order. If you experience other symptoms, let me know and I'll do my best to help.

  Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• 7200 printer: photo 7200 printer acts like it is printing, but paper comes out without any ink

  I tried to print photos.  The printer pulls the paper of photo through the machine and acts like it is printing, but paper comes out the same as it began.

  I was unable to print a document, machine not to copy, use genuine hp cartridges, some levels many other low, but non-printing ink.  In fact, I disconnected power to the printer and restarted, it.  Subsequently, he printed as it should.  Thanks for your help.

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Works of scan, print says it works but does not work

  Hi all! Everyone seems to have the opposite problem - wireless printing, but the scan is not. Not me! I choose "scan" of my printer OR computer interface and it starts right up. Problem is, when I go to print it crosses the 'impression' screen, then said "finished printing" (no crash, error, or something in the queue to delete - it's in the queue, then it disappears as if printed), but no results of the company at the end of the printer!

  Before ask you, yes the printer works (print from a card SD inserted directly on the printer, or old computers connected via a network). Yes, I turned everything and turn it back on. Yes I tried to download printing HP & scan doctor, and he said all right, see ink levels etc, but its test page like any other print job. Yes I deleted the whole HP and re downloaded and searched/connected my computer via the wireless network. And, as previously mentioned, it scans. Oh and tells me that my ink level! Clearly, there is communication, but not for that. What weird sous-parametre I'm missing?

  And also, if you can solve this problem, can you give me an idea if it's going to suddenly begins to print 80 pages or I tried to beam on, so I can stop it? : )

  Thank you muchly!

  Hi @theshrew

  Please try bypassing the spooler to see if you can print directly to the printer.

  1. click on start and go to devices and printers.
  2. right click on the printer and click on printer properties.
  3. choose the option "print directly to the printer.
  4. click on apply and then OK.

  If it works, follow the following steps and try printing again.

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the Run dialog box

  • Type services.msc and press enter
  • Locate the print spooler and double-click it to open the spooler properties
  • Make sure you that Startup type is set to automatic, if not please click the menu down and select automatic
  • Under Service status, please stop the server, wait a moment, and then click Start

  If bypassing the spooler does not have a feel successful, let me know.

  Also, what model of printer do you have?  How can I find my model number or product number?

  You get an error message, or print a blank page? More detail I have better

• 3054 DeskJet not printing but scanner not work

  Hello!

  I have a Deskjet 3054 by label on the printer, but the IP address it's Deskjet 3050 all-in-One J610a. My computer is Mac 10.9.5. I read through other posts and have updated all my software via Apple Software Update.

  The symptoms are as below:

  -Scan works (I can scan a page and view it on my computer)

  -Œuvres report printer (this is where I got the IP address)

  -The Mac printer & scanner, the printer is recognized and connected

  -However, when I print a document, the queue is displayed, shows that the work is being processed. However, the printer does not move. I do not hear the cartridge move. Then the queue indicates that the work is completed and the queue is empty.

  Help, please!

  Thank you!

  In the Moonlight

  Hi @Michelle_sonata

  I want to help you print from your Mac to your Deskjet 3054. I understand that the print queue says that the print job has been done, but nothing prints. Please follow the steps below and let me know the results of your efforts;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44