Printing from InDesign for Epson Stylus Photo R3000
In InDesign CS4 when I go to print to my new Epson Stylus Photo R3000, I don't see any options necessary to select types of paper, color or black, IPR, etc. in the printing establishment of Project dialog Panel.
However, when I use Quark I see all the options I need. Surely InDesign should have them too?
Please can someone hepl?
Thank you very much.
Oh, re-read your messages earlier, you say:
Dialog box comes under 'General' at the top by "Printer" the only option that he has 'Epson Stylus Photo R3000' which is the printer I have.
and then separately:
Yes, but if you hit 'printer' in InDesign all you get is a dialog box saying use of InDesign print dialog box to "avoid conflicts of impression. Then you are taken back to square one where you cannot select the printer determine color and therefore cannot choose the types of paper etc.
Are you saying when you hit a printer you get this? :
If Yes, then you have to hit the triangle I circled in green, to get to this:
And you should get a whole lot of choice in the drop-down list of oval-surrounded. Some may be specific to a printer, and some cannot.
Is not what you get? If this isn't the case, maybe you should post a screenshot.
I'm not really convinced that the choice of the color in the InDesign print area management has much to do with what you want to accomplish. Certainly, it should not influence selection paper. for example.
Tags: InDesign
Similar Questions
-
Using a XP printer driver in Windows 7 for Epson Stylus Photo 1280
My Epson Stylus Photo 1280 does not recognize my paper defined by the user of 12 x 12; Neither will Windows Photo Viewer. It will only fill a 8.5 x 11 part of the page. The contour of 12 x 12 presents however when you preview before printing. Customer service Epson think the driver integrated in Windows 7 does not work well and suggests fixes Windows 7 so that he can work with the printer driver XP old... that I can download. Is anyone know how do Windows 7 works with a XP driver for my printer? Windows Professional
writing in the new message: * e-mail address is removed from the privacy... * My Epson Stylus Photo 1280 does not recognize my paper defined by the user of 12 x 12; Neither will Windows Photo Viewer. It will only fill a 8.5 x 11 part of the page. The contour of 12 x 12 presents however when you preview before printing. Customer service Epson think the driver integrated in Windows 7 does not work well and suggests fixes Windows 7 so that he can work with the printer driver XP old... that I can download. Is anyone know how do Windows 7 works with a XP driver for my printer? Windows Professional
Epson support suggest EasyPrint? http://www.Epson.com/cgi-bin/store/support/supAdvice.jsp?noteoid=48205&type=highlights
Looks like it can do what you want.If you don't already have it, download v5.2cA if you have 32 bits, or v5.5aAs if you have 64-bit Windows and install in XP or Vista compatibility mode.
SC Tom
-
Drivers FOR ePSON sTYLUS PHOTO 1400 VERSES wINDOWS USE ON 7
I have an Epson Stylus Photo 1400 and Windows 7. I need to update the drivers - the color is not right.
Help!
Yes, and I finally managed to download - now, to see if the color is correct!
Thanks for asking
-
Epson Stylus Photo RX620 does not work with win 7
Epson Stylus Photo RX620 will not print driver installed after the upgrade to Vista. / Scanner works fine.
Epson Stylus Photo RX620 will not print driver installed after the upgrade to Vista. / Scanner works fine.
Hello
This printer is on the compatibility list Windows 7 here:
Compatibility Windows 7 for Epson Stylus Photo RX620 all-in-One Printer
Please click on the following link and download the latest drivers for this printer.
Epson Stylus Photo RX620, drivers & downloads - Technical Support - Epson America, Inc..
Let us know the results.
Thank you for using Windows 7
Ronnie Vernon MVP -
"epson stylus photo r300 driver" "windows 7 64".
I can't find a printer driver for Epson stylus photo r300, with Windows 7 64 bit. I would be very grateful for any help. Thank you.
I can't find a printer driver for Epson stylus photo r300, with Windows 7 64 bit. I would be very grateful for any help. Thank you.
Before I have the normal state, here's the answer:
The Epson Stylus Photo R300 inkjet printer is not compatible with Windows 7 (32-bit or 64-bit).
[This is a web link, if you click on it, it will take you to the Compatibility Center Windows 7-more specifically to the web page on the printer inkjet Epson Stylus Photo R300 as much as Windows 7 64-bit is concerned.]
The 'normal' is that hardware drivers and compatibility with any given operating system (Windows, Mac OS, Linux, etc.) is provided by and determined by the manufacturer of the product in question. Similar idea to the software. So in this case - Epson does not provide a driver - nothing else does to 'make work' is a hack and can stop working at some point, probably will not give the same functionality as the material has in the operating systems supported by its manufacturer. -
How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?
Original title: How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?
It is not listed in the list of printer drivers and I can't find anywhere on the web.
Hello
This article from Epson says that the driver is included in Windows 7.
I don't see any info out there that clearly explains how to add it. It simply States that you must go to "add a printer". Looks like you already did this well.
I would say following upward with support from Epson to see if they can offer some better instructions. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.
-
Driver Epson Stylus Photo 870 Inkjet Printer for Windows 7 on a 64 bit system
New to Win 7 and 64-bit. I'm looking for a driver for my printer driver inkjet Epson Stylus Photo 870 running Windows 7 on a HP laptop with a 64 bit system. Thanks for any help!
To find the driver, please see this link:Kind regardsChauvet J. -
Driver printer Epson Stylus Photo 950 for Windows 7?
I am using Windows 7 Ultimate test (pre-release version) and I'm having problems to make my Epson Stylus Photo 950 printer to work. Epson has said there is a MS "Inbox" driver I can download via Windows Update. I have run Windows update and it did not download a driver for my printer. Where can I get a driver for my Epson Stylus Photo 950 printer?
someone has already contacted Epson this error. Someone else said that the 960 driver works for the device. Thread of previous post on this issue
http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/e6575808-E72E-44D7-adf0-ae89b873319e Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
-
I checked the ASUS driver updates and the Epson site, at - he know any solution to solve?
Hello
I suggest you download the Windows Vista of the Epson driver, install the driver in Windows vista compatibility mode.
Download driver Epson Stylus Photo RX420 for Windows Vista
Make older programs run in this version of Windows.
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
-
I have an Epson Stylus Photo R300 and immediately after changing two cartridges of my computer error - service - parts inside your printer are at the end of their life expectancy, and the printer will not respond to the control buttons. I had printed only a test page which was fine, but I can't get rid of this message that stops my printer to work. Help, please!
The manual for your printer said, "dealer" when you see this error message. This article from Epson (for a different printer model)
indicates that the porus waste pads are at the end of their useful life and you should get replace them and then use the reset utility. It may be cheaper to just buy a new printer, so study the costs before making a decision. I would contact Epson directly for advice.
-
Epson Stylus Photo RX420 with Vista printer driver problem
I have an Epson Stylus Photo RX420 Series all in one printer, copier and fax machine which worked perfectly on my old Windows XP computer.
Unfortunately this XP computer has failed recently so I've upgraded to a new PC running Vista.
When I try to install the Vista printer recognizes the device and research initially drivers preloaded to find the printer driver.
He says so I need to use Windows update to download the right driver which I allow then (which is consistent with the information available on the Epson site that says I need to use Windows Update to get the correct driver).
Windows Update, then go online and find the pilot, but finally errors saying installation fail due to a timeout problem.
I have no other problems with Windows Update install the patches, fixes, etc. They all have download and install correctly and they should be larger in size than the printer driver.
Any thoughts on how I can get the correct driver for this printer, download and install?
Hi IanRP,
I suggest to download the compatible driver for your printer from the link below and check if the problem is resolved.
If this does not work, try to connect to the Windows Update site. To do this, visit the following Microsoft Web site and install all updates.
http://windowsupdate.Microsoft.com/default.htmYou can check the link below:
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-driversPlease post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
Epson Stylus Photo 1280 (M) prints only 8-1/2 "wide vs 12.5" wide - Win 7
The printer driver Windows 7 ultimate 'Epson Stylus Photo 1280 (M') prints only 8-1/2 "wide vs 12.5" wide that the printer is capable of.
I put the default paper 12.5 "x 18", but it prints still only 8-1/2 "wide no matter what. It seems to be a driver problem. It works very well in the old machine with XP. Note, Epson no longer supports this printer, but there is a driver Win 7 from Microsoft.
Any suggestions?
Thank you
Hello
· Which application you want to print?
· Did you try to print in different applications and check if you are facing a similar question?
Device drivers are provided by the manufacturer of the device. I suggest to contact support Epson printer and check the availability of drivers for Windows 7. However, you can try to install the Windows Vista drivers and check if it helps:
If the margins are incorrect:
(a) ensure that the paper settings are correct for your paper size. For instructions, see printing from Windows
(b) ensure that paper that you present is the size of paper and type parameters of selected paper in Epson Stylus CX5800F Control Panel or in your printer software.
(c) choose the correct margins for your paper size.
(d) use the print preview option in your printer software to check your margins before printing.
(e) make sure your paper is positioned next to the right of the manger.
Alternatively, you can contact Epson support at the below link:
-
I have Windows 7 and I have an Epson Stylus Photo RX 425 - in Windows Vista, I had no problem - but now does not work my printer in my dear 7
Please help me - should I buy a new printer?Looking at the Epson site for these drivers, I see that the latest version, they offered was from 2007. Here are the instructions for using Windows Update to install the drivers for the printer on Vista . I don't know if it will work in Win7, but it's worth a try. If this does not work, then you can contact Epson to see if they will be providing drivers for your printer. Frankly, it is doubtful. Is there no drivers, then you will not be able to use this printer with Windows 7.
http://www.Epson.co.uk/Printers-and-All-in-Ones/Inkjet/Epson-Stylus-Photo-RX425/drivers-support;jsessionid=6A02FE6FC234F2A34D3CDF3E103FF2D6. Acc1? Target = article & Extn = .html & ArticleID = 1282 MS - MVP - Elephant Boy computers - don't panic! -
My Epson stylus photo R1800 printer will not install and keep driver error 28 has not been installed
Original title: my Epson stylus photo R1800 printer does not install. I get error 28 driver has not installed... I need help that I have tried everything I can think...
I had one installed R800 and I used it for about 2 hours. Then he disappeared. I tried everything to reinstall it and no luck (error 28) now, I've upgraded to R1800 and same problem... Someone had the same problem?
Hi Roy,
I am sorry to say that the Epson Stylus Photo R1800 printer is not compatible with the Windows 7 operating system.
I suggest you to check the system requirements for the printer from the link:
http://files.support.Epson.com/PDF/r1800_/r1800_01ug.PDF#page=103&view=FitV&pagemode=none
I also suggest you to install the drivers for the printer in compatibility mode and check from the link:
Make older programs run in this version of Windows:
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
For reference:
What is program compatibility? :
http://Windows.Microsoft.com/en-in/Windows7/what-is-program-compatibility
If the problem persists, then I suggest you to contact support Espon from the link:
Contact Epson Support:
http://www.Epson.com/cgi-bin/store/AboutContactUs.jsp?BV_UseBVCookie=Yes
If you need further assistance on this topic, let know us and we will be happy to help you.
-
Epson Stylus Photo PX830FWD all-in-One Printer
I'm looking for deacheter a new A3 printer and like the look of the
Epson Stylus PX830FWD
The literature indicates that the automatic connection is compatible with Windws 7.
This means my PC under Windows XP does not support this printer at all?
I'm not really bothered about the automatic wireless connection - I'm glad she's
cable connected to my PC.
Can you help me?
Thank you very much.
Danuta
Hello
According to the pilot of link on the Epson site taking the above printer has drivers for the following versions of Windows:
Windows XP 32-bit, Windows 2000, Windows XP 64-bit, Windows Vista 32 - bit, Windows Vista 64 - bit, Windows 7 64 - bit, Windows 7 32-bit
Maybe you are looking for
-
How to download firesheep
-
After update on Toshiba 32W3455D (B) - wifi fails to connect
Hello I hope that someone can help you. Our Toshiba TV UK (B) 32W3455D updated itself this week.Since then, we have been unable to connect to the internet. Initially, he said missing a wifi dongle - I have no idea what it means. Then we tried a retun
-
Problem of noise with signal analog mV
Hi allThis is the first time I read an analog signal with LabView, so I'm sorry for the little knowledge I have.I'm reading an analog voltage between 20 mV and 200mV signal (proportional to temperature 1mV = 1 degree Celsius and given out by a thermo
-
I had my B210a Photosmart more for awhile & went through several sets of ink cart. However, after the last cartridge change, something strange happened. I do a lot of printing labels, & the printer began to print about ¼ "too high, to align with th
-
Cannot restore the backup files in Money 2006 money 2008
Original title: Money 2006 to 2008 I try to get backup Money 2006 to Money 2008, 2008 does not recognize my backup file. How to move data from 2006 to 2008.