printing in black

Similar Questions

• Why my printer prints in black and white in the documents

  I just bought a mac book pro and when I print my documents printed in black and white.  My printer prints color with other computers.

  http://www.macmaps.com/printersx.html

• New Photosmart 5520 will not print in black

  I have a new HP Photosmart 5520 printer all-in-one.  Black ink ran out so I replaced it with a previously used ink cartridge which is of the same type # 564 but a XL version.  This cartridge has been barely used.  Now, I just can't get anything to print in black.  It will print in color, but not black.  I tried to turn off the printer.  I put the cartridge in my printer and it worked fine.  What should I do?

  edgarlogcabin wrote:
  

  my printer hp 5520 will not print black

  The in the here document troubleshooting steps may help resolve problems with black not not printing on your Photosmart 5520.  Especially make sure to check the events as on the Six Solution.

• HP 7500 has: has HP 7500 or HP C309g can print in black

  My HP 7500 has no my HP C309g can print in black. The 7500 had the same problem before, so I went to my other printer for a month and he got mysteriously? Now, will not print in black. Yes, genuine inks, cleaning head complete and I tried, but the chances of the two get a dirty print head at the same time is microscopic.

  Hi @kanshaku

  I want to help you be able to use two printers again. I understand that the black ink is not working. Please start with the procedure described in the following document; The problems of print quality for the HP Officejet 7500 (E910a and E910c) to Grand Format Printer e-all-in-one series.  This document applies to these two printers because they have such similar ink systems.

  If you have performed all the steps in the document above and the problem persists, not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest that if the printhead and the printer he are out of warranty.  Hot water rinse printhead - HP ink printers of the series with removable head.

  I have recommended this solution to others and have been successful, but I can't guarantee that this will solve the problem, it is a term of type line of effort. I hope it helps.

  PaganC wrote:

• HP4480: will not print in black

  I have recently upgraded to the version of windows in 10 home edition 1511.  I have a HP4480 that is compatible with windows 10.  It is updated with the correct drivers.

  My printer will be printed in black and white if I copy a document on the printer, HOWEVER it will not print in black and white if I print a document on my laptop or from a Web page.  I'm also using Microsoft Edge.

  I run Scan Doctor, clean my print heads, made sure everything is aligned, but can not determine why I can not print in black and white the computer laptop but can from the printer.

  The diagnostic message only I received is "peripheral composite USB does not work with USB 3.0' I have no idea what this means and don't think that I have the choice for the ports on my Inspiron 15R laptop 5520.»

  I've also posted on the Microsoft forums but really need to get the printer works with the operating system and cannot afford to buy a new printer just because I upgraded.

  Any help is appreciated.

  Thank you.

  Janet

  I solved the problem.  For some reason, my real print HP 60 cartridge was the question.   Almost empty, I left forward without problem.  Once I replaced the cartridge, all now print correctly in black and white.

• E HP Print prints only black and white

  I print from an iPad on a printer Hp 5520, using print e. Hp previously was no problem until recently, it has now stopped printing in color and will be only only printing in black and white.
  If I print using the print on the iPad icon, I am still able to print in color, but I want to use the additional settings available in e print.
  I suspect that it may be to do with my an update of e print or IOS download
  
  I would appreciate any advice please.

  Hello R0dder5,

  Welcome to the HP Support forums.  I see that you do not want to be able to print using all options available in the HP ePrint app for your iPad.

  I'm sure that you already have, but my first suggestion is to check the settings in the HP ePrint app to ensure that it did not retain the setting.   If you choose the color setting is always print in black and white?  If so, please try to uninstall and reinstall the application.  You will have to start the activation process.  I've included the HP ePrint Mobile App FAQ document.  There the steps to uninstall the app, if you need it.

  Please let me know what happens.

• DESKJET F2280 ALL IN ONE PRINT: DESKJET print not BLACK

  First time on the Forum-

  Printer does not print in BLACK (the color is fine)

  Proplem started after I replaced an empty black cartridge-everything was fine before this.

  Despite the list ready to print with sufficient ink, black text was not printed.

  I did the test printing of alignment and cleaning of nozzell but without effect.

  I have installed and reinstalled the software with no effect.

  Can someone tell how can I solve this problem?

  Thank you very much Mike

  Welcome @BOROMIKE,

  Thank you for your participation in the forums! I see that you have problems with the new black cartridge does not print in black. I want to help you.

• HP Deskjet 1050 J410 cannot print in black and white

  Hey everybody,

  My HP Deskjet 1050 J410 on 64-bit Windows 7 is unable to print in black and white, even after selecting the option to do so. There is no error message, and the diagnostic tool on the HP site can not solve this problem too.

  Your help is appreciated.

  Hello world

  Follow the steps described in the following document below.

  Troubleshooting print quality problems

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• OfficeJet 6700: print in black only

  I am wanting to print in black only. I removed the color cartridges printer doesn't like that we

  So, how can I disable the color cartridges?

  John

  Hi jozz71,

  If you are wanting to use the black cartridge for printing, you can follow step 2 in this document to change the print settings to print in black and white:

  http://support.HP.com/us-en/product/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/document/c04331666

  Please be aware that you don't need two ink cartridges to print.  The printer uses little color for printer maintenance.  This interview is described in the document I have attached.

  Once the color cartridges is completely exhausted you must replace it in order to print.  After this setting the printer to print in black and white will minimize the used color and make it last longer.

  I hope it's useful for you.

  Jean

• HP 3050 has: only want to print in black

  I want to print in black only.  My color inks are very low, my almost full black ink.  How can I do this?

  The Deskjet 3050 a printer print (but not copy) with just the black cartridge installed as indicated on page 30 of the manual here.  Store the removed color as shown in the paper here.

  Use single-cartridge

  Use single-cartridge use the HP all-in-one with only one cartridge. Mode single-cartridge begins when an ink cartridge is removed from the distribution of the print cartridge. In the mode single-cartridge, the product can only printing from the computer.

  NOTE: When the HP all-in-one device operating in mode single-cartridge, a message appears on the screen. If the message appears and two ink cartridges are installed in the product, make sure that the piece of plastic tape protection was removed from each print cartridge. When the Ribbon plastic covers of the print cartridge contacts, the product cannot detect the cartridge is installed.

  Exit single-cartridge

  Install two ink cartridges in the HP all-in-one to exit single-cartridge.

• How to get my photosmart 7525 to print in black and white on a pc

  How can I get the print option on my pc that allows me to choose the color or black and white in Windows?

  Hi ep43,.

  Welcome to the Forums of HP Support! I understand that you want the options to change the color printing in black and white on your HP Photosmart 7525. I would like you to follow the steps below on your computer:

  1. go to your Start Menu

  2. Select devices & Printers

  3. right click on your PS 7525 and select Printing Preferences

  4. click on Advanced Options

  5. in the present case under characteristics of the printer, you will have the option to print in grayscale, black ink only or Off (which would by default for color printing)

  

  I hope this helps!

  Thank you

• Passage of printing in black ink to print ink color and visa versa

  I am running an Imac OSX Yosemite 10.10 operating system.  I want to print in black ink only, so I do not use up my color ink cartridges, but when I opened the impression that there is no option (I see) to make this change.  I've updated my drivers today and still do not see the option to change printing black printing color (gray scale).  My printer is a HP Officejet Pro L7555.  I'd appreciate any help.

  Hi @DennisBelle

  I can help you manage your print settings. I wonder if the option you are looking for is not available when you use the AirPrint driver and if you use this driver instead of the HP driver.

  We will restore the printing system, repair disk permissions and add new printer using the HP driver.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Cannot print in black C6180

  My C6180 printer all-in-one just stopped printing in black. I changed the cartridge of the printer 3 times and it made no difference? It prints in color but not black. I cleaned the cartridges and that did not help. I noticed on some other forums that other people have the same problem without finding a resolution.  Anyone got any suggestions?

  Well, I might have some hope. Actually, we have found a solution to this problem and our printer now works as usual. I'll try to explain what we were doing, so I hope it helps someone else. I must say that I was chatting online with a HP technician at least an hour and it never recommended this solution, and we found it on their help page. Maybe he did know about this!

  First, you will need to access the Toolbox of printer on your computer. Go to start-programs-HP-HP Solution Center.

  Select settings

  In the drop-down list, select the printer settings

  Select printer Toolbox

  In respect of peripheral Services, select the option for clean print heads

  It's a clean deeper than what is being done to the printer itself. We ran this about 5 times, and at the end of this it was printing black again. It was a few months ago and we have not had a problem since.

  I hope it helps someone else. HP did not of course help us!

• 6510 all-in-one does not print in black

  Hello

  So my off-warranty 6510 has started to not print in black. I bought this in August 2012, and it has been pretty reliable.

  Now it just won't print black. I searched through these forums and I feel like a big community now - I'm not alone with this problem.

  I did print without end cleaning of the printer head and my PC (until the option has disappeared!). Print head alignment failed. And I have replaced the cartridge.

  As it is not in warranty, I took the print head and gave him a * beep * clean. When he was replaced, it only printed a page in black (bad), then no more.

  Print in color if fine, except now (after that numerout head cleans) most of the ink levels are low.

  Stupidly, I expect a miracle and that a HP representative will respond and provide a kind of solution, but I think I know it's out of the dumpster. It'll be the 3rd death of HP printers in 4 years (the first 2 were replaced by the store - Costco).

  At least now that my stock of cartridges is exhausted, I am not bound to HP again as if I was the last time.

  Sort problem. Thank you very much for your support.

• HP deskjet 3520 scan copy main: print in black ink only

  does always change to print in black ink only, or is it possible to save it so I don't have to go properties, advanced to change

  Thanks robert

  Welcome to the HP community @robert3591,

  I read your post want to print in black ink only, from your Deskjet 3520 and how, you do not select this option, every time you print from your Windows Vista system.

  I would say to change the option to print in black ink only from "Devices and printer" to contain the parameter always print in black. This is a great detailed post from my colleague @X-23 , which shows all the instructions and screenshots:

  Re: I want to only print in black ink

  If there are any questions or problems, please let me know! I hope this helps.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!