printing on network with the laserjet pro 1606dn

Similar Questions

• Network with the MacBook Pro 15 "problems

  My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

  2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

  Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

  the company's programs, but I mainly work on the Mac side.

  An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

  I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

  Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

  Thanks for all the wisdom and strategies.  Maggie2012

  Hello maggie2012,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards

• I can't print pdf files with Color LaserJet Pro MFP M4777 - says "unable to print document."

  When I try to print a pdf document the printer says "the document could not be printed" "it is have not chosen to print pages. It will print from word.

  Try this.

  Remove the rom Acrobat Reader your computer completely.   Now, go to the website Adobe and download and install Adobe Acrobat Reader DC.  Try now.

• Someone at - he put wireless printer in place with the iPad pro? If for information and advice would be much appreciated.

  HHave just bought an iPad pro and wonder if anyone has one that they have already set up a wireless printer? If so little support and advice would be welcome?

  The printer must be AirPrint compatible, and there is no real configuration to talk on an iPad.

  As long as the printer is AirPrint compatible, and both devices are on the same wifi network, the printer should simply appear in the printer selection screen when you attempt to print something.

  On AirPrint - Apple Support

  AirPrint allows to print from your iPhone, iPad or iPod touch - Apple Support

• Color Laserjet PRO MFPF 377dw: problem with Color Laserjet PRO MFPF 377dw and HP network scanner

  After removing the package of printer drivers HP, all attempts of resettlement via WLAN regularly fail before the end, which indicates that the device is not found. I physically connect the printer to the computer by USB cable to install the software successfully. When I go to WLAN Wireless thereafter, the printer works perfectly within the network. If I remove the USB cable, the following error message appears when I try to start scanning HP: HP CLJM377 Scan found . In other words, HP Scan cannot be used with a PC not connected by USB cable. All other remote features function normally printer in wireless, including HP Scan & Capture. Is there a possibility to correct this, via the Windows registry from my PC?

  MrRobot wrote:
  

  Hello! @Chirsistei, your description of the HP product is classified as a commercial product (business). Our sales support team provides support via the channel of entry here. If you need immediate assistance, you will need to open a session one business with our sales support team. Click on this link http://ow.ly/I3gw30140F8 for more details.
  Let me know if you want more information and/or assistance.

  Have a great day!

  See you soon!

  Hello Chetan,

  I think I'm in the wrong forum here because I live in Switzerland and here the Laserjet Pro M377dw color is sold to private users. I have no access to a support plan and use the printer in my home office network. Your proposed solution therefore does not help me, during this time, I have posted this problem in the forum on language German you need not to pursue this new. Thanks anyway

• LaserJet Pro 200n: problem printing PDF with HP Laserjet Pro 200n

  Hello

  I have problems printing of PDFs of our color laserjet pro 200 hp MFP M276n.

  I get a sheet of paper and a blank message on the printer saying 49 service error - power off, then on

  I can print from word/excel documents. It started only recently, and the printer used to work properly. I have updated the firmware of the printer from the Web site and also downloaded the new driver software and deleted, reinstalled the printer.

  Connected printer throgh network, using the static IP address. I have reset the default printer and reinstall with a different IP address. The problem still exists.

  Let me know what to do for them.

  Hello

  My printer now works, and it is wrapped only because two or three color toner runs out, and the printer to enter this mode. Really stupid... as I tried to print the document B & W, and then set the options pint to print grayscale.

  In any case, the solution for me is that make sure toner all have dye in it, and youi don't have no cominng message saying 'Replace cyan"etc...

• Help! Accidentally updated the firmware of the Laserjet pro 400 with firmware Laserjet CP4525

  Help!  Accidentally updated the firmware of the Laserjet pro 400 with Laserjet CP4525 firmware.  The printer is now just spit out pages and never reaches a State ready for the correct firmware.  I really hope that I don't have it bricked just with a click of silly.

  Can someone help or suggest a way to put the appropriate firmware?

  See you soon

  Glyn

  I got it due sort connect the laptop via USB drivers install and then deploy the firmware.

  I then had to delete and add the printer on our print server.

  See you soon

• Printer + storage networking with X 3000 (for internet) & E4200V2 (with bridge for the extension of coverage)

  Salam,

  Would someone please quite friendly and find out about the different ways to connect a printer to the X 3000.

  I could not find in the User Guide where it says or explains how to connect a printer to the X 3000, that is wireless, USB port, or directly through one of the LAN ports.  I also checked the product information for X 3000 on the CISCO Web site and it is referred to as StorageLink USB port.

  Another question. Recently, someone on these forums told me hot to connect an E1500 in Bridge mode to my X 3000 and you explain everything very well.  Since then, I have reconsidered and now I am looking to buy the E4200V2 for to connect bridge for my 3000 X instead of the E1500.  Correct me if I'm wrong but connect the E4200V2 to my 3000 X should be the same linking the E1500 my 3000 X, i.e. the bridge mode? Yes or no?

  And my last series of questions is rregarding what would be the best editing for adding a storage device and a printer to my network once I get the E4200V2 and configure it in Bridge mode?

  -Can I connect the printer storage and device to my E4200V2?

  -Should I connect both my X 3000, that provides my internet connection?

  -Should I connect to the X 3000 and the other for the E4200, if so, to which, for best set-up?

  I hope I'm not too ask.  Eagerly look forward to the answers.

  Abu Adam

  1. the X 3000 USB port is only for the storagelink. Not for printing.

  2. connect the E4200 in Bridge mode as the E1500.

  3. If you want the storage to be accessible from the internet, you need to connect to the X 3000. If you want only accessible from the local network you can connect to either the X 3000 or the E4200.

  4. a USB printer only goes with the E4200. However, if you printer has a network (wired or wireless) interface, I highly recommend to connect the printer via ethernet / wireless and not via the USB port through the router.

  5. as a general rule, you should be better off with the storage attached to the E4200 instead of the X 3000. In this way, the power of the processor of the E4200 can be used for storage handling and X 3000 can do the routing. But that obviously depends on the load at a time (that is how you use the storage) and the limits that you hit. Maybe it makes not a difference when you connect. The best way to know is to test...

• no WiFi in the Laserjet pro 200 M276n option

  Hi all

  I have just purchase HP Laserjet Pro 200 color MFP M276n, I managed to install and print documents using the USB connection.

  However, the printer is equipped with WiFi option that let's you connect the printer to a wireless network, or print directly from a WiFi device (smartphone, laptop, etc.).

  The problem is, I can't turn on the WiFi option. In fact, there is no option on the control panel of the printer for wireless connections.

  The manual gearbox and hp.com site all indicate that this model has a wireless connectivity. Even when I turn on the printer, I can see that there is a small WiFi symbol that lights (blue) on the control panel of the printer, which indicates that the printer is equipped with WiFi connectivity. But the light goes off again after that the printer is on and I can't find a way to turn it on.

  Help, please

  Thanks to you all

  The section of the overview of the specification document for the LaserJet Pro MFP color 200 M276n States:

  ""Set up and share anywhere in the desktop with Ethernet wireless and high connection".

  but this phrase is qualified with two links to notes; the second of these information States:

  "Wireless direct printing, HP Auto Connect Wireless and integrated wireless connectivity are only available on the HP LaserJet Pro 200 M276nw MFP color"

  If your model of "n" has no wireless capability; you need the model "nw".

• AutoCad and using the LaserJet Pro CM1415fnw

  I use Asus with Windows 7, 64 - bit with HP LaserJet Pro CM1415fnw, connect via the net, usb and wireless.

  I use AutoCad, but when I try to print, the AutoCad stops.

  Can print I have all other programs, without problem.

  Have tried to install the new porgrams printer, but the printer stops the program.

  There is problem with the installation of ' all programs ', - LJ-ProCM1415 full solution 12033 acf.exe, DVD and the internet.

  He stops and stops.

  It seems that HP have a problem with the software? What can they do?

  Is there anyone who can help me?

  Hi Bjornefjell,

  I found a PCL6 Universal Print Driver, you can download and install to try to run AutoCad, with your program to see if that helps.

  Drivers & software for HP Universal Print Driver series for Windows.

  Let me know the results.

  Thank you.

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you

• Copy and scan with the Officejet Pro 8100

  Can I scan and copy with the Officejet pro 8100?   If Yes, how, is not in the manual.

  LON

  The Officejet Pro 8100 is a printer only, it is not a multifunction device.

  You can find the specifications below:

  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=4323241&JumpID=oc_r1002_usen_c-001_r0002

• Where can I find the drivers and software for the LaserJet Pro M1132 MFP on Mac OS Mountain Lion?

  Hello

  According to http://support.hp.com/us-en/document/c01664444 it doesn't seem to be a software and drivers for the LaserJet Pro M1132 MFP.

  When will they be available?

  I read in http://support.hp.com/us-en/document/c03427752 that "today, a solution for your printer is not available for the Mountain Lion. However, an update of the driver will be available in fall 2012 . "Since it's already winter 2012, a solution will be available before January 2013?

  Thank you.

  Hi Chun Pong,

  Seems to download the software I mentioned before has been deleted. This means that a new driver will be downloaded.

  Please visit the site from time to time if a new software is available. I'll keep an eye as well and provide an update here, if the new software can be downloaded. It may take a few days.

• Adobe will not be printed. Comes with 'the document cannot be printed""there not selected pages' ideas on how to fix?

  I am running windows 7 and a network printer.

  It prints very well with the other stuff.

  I tried to load the latest version of Adobe Reader, but still no action

  Hi Ridgy1229,

  Try the following: open Adobe Reader go to edit-> Preferences menu

  • under Documents, change "Show the documents in PDF/A mode" Never
  • under the (enhanced) protection, clear protected at Startup Mode

  Restart the drive & try to print.

  Kind regards
  Nicos

• With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  (It sleeps)