Printing problem Epson 2200 with Lightroom 3.0

Similar Questions

• Problem of layout with Lightroom CC 2015 print output

  Hello

  I work with the following configuration:

  • MacBook Pro (15-inch, mid 2010)
  • OS X Version of Yosemite 10.10.3
  • Adobe Photoshop Lightroom CC 2015-Release
  • EPSON Stylus Pro 3880

  I tried to print two images on one sheet of paper A3 Super with an EPSON Stylus Pro 3880 directly from Lightroom and here is an example of what I expected (I resized and added a black border for visibility on the forum):

  

  This is the preview I have in the Lightroom print module, and it is also what I have when I print in a JPEG with Lightroom.

  Unfortunately, after that I started the print job, this is what came out of the printer:

  

  As we can see, the layout of the two images was shifted to the top of the sheet of paper (the top of the first image in the process of culture) and about 30% of the right part of the page layout has not been printed.

  You have no idea what I'm doing wrong here?

  For your information, I print very often so I'm not sure that I have everything properly 100%. However, I have been printing successfully in the past and it is with the same MacBook Pro on the same EPSON Stylus Pro 3880 printer but it was with OS X Version 10.10.1 Yosemite and Lightroom 5.x (I don't remember exactly which version).

  In addition, because my impression was urgent, I retried with a Windows machine running Lightroom 4.x with the same printer and it has been a success. So I doubt that my initial settings on my MacBook Pro were wrong, even if I'm not 100% sure.

  Here are a few updates:

  I contacted Epson and it seems to me that they care more about Sir Cedric from Adobe. Epson said that they were investigating the problem from their side and they advice me to install the "Apple Common Updater" (Epson Stylus Pro 3880: Apple Common Updater 1.0).

  Then, I started Uninstalling everything with the Center "Uninstall" (Support and downloads - Epson Stylus Pro 3880 - Epson), then I installed the "Apple Common Updater", then I plugged the Epson Stylus Pro 3880 printer but it seems that the driver was not installed by the 'Apple Common Updater. So I unplugged the installed printer driver (driver v9.33 23-oct-2014 ftp://download.epson-europe.com/pub/download/3794/epson379436eu.dmg) and then plug the printer back.

  Surprisingly, my impressions on sheets of A4 paper succeeded.

• Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and told me that I had to upgrade.

  Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and said to upgrade?

  Make sure you sort the display you are looking at instead of file name recording time. It is in the context menu with a small sign of a to z just below images. Make sure also that you have no active filters.

• Printing problem in XP with compatible printer share

  Hi, I searched for a few hours for more information on my problem, but while I can find a lot of Fusion printing problems, none is quite like mine I think.

  OS = Leopard / printer is HP Officejet Pro 8000 A809 USB / VM = Windows XP SP3 / Machines virtual _ settings _ printers = enabled and corresponds to the default printer

  I have not installed the printer drivers / software that came with the printer on the virtual machine.

  The printer appears in printers and faxes XP. In the comment in the printer properties box, it says 'Printer created by TPAutoConnect', the location is indicated by "0;".

  When I click on Print Test Page XP shows me a test page is printing. Back to OS X, the print queue of the printer indicates the following...

  Status = printing

  Name = Test Page

  User = username

  When = earlier

  At the top of the window, a little less 'print 'Page of Test'." I get "printer busy (Status: 0x00002e9).

  And that's what I get. No printing. To avoid confusion, the printer worked very well for OS X.

  All suggestions welcome. Should I, for example, to install the drivers under XP?... my interpretation of the description of the features of merger 2.05 in this regard is that I did not.

  Thanks in advance.

  Setting a DAY = Just closed my VM and merger altogether, and then my printer suspended for life and printed the Test Page in Windows XP printer! Ideally, of course, I don't want to have to close to get my impression made

  If the impression of Fusion is not working properly for you, then you can disable this feature and then share the printer in OS X and installing the printer in Windows in the usual manner with pointing to a shared printer.

  ==========

  1. turn off the checkbox activated under printers in the target Virtual Machine settings.

  2. turn on printer sharing in OS X and allow the target printer to share.

  3. in Windows, add a new printer and add it as a network printer by using the following URL Convention.

  http://Computer_Name:631/printers/Queue_Name_of_target_Printer
  

  If you use linked by a bridge, you can also use:

  http://Host_IP_Address:631/printers/Queue_Name_of_target_Printer
  

  Or if you use NAT, you must use:

  http://Host_vmnet8_IP_Address:631/printers/Queue_Name_of_target_Printer
  

  Examples:

  The shared network printer is a HP LaserJet 4050N printer on my MacBook Pro, and the following information is relevant to this.

  ComputerName = MacBookPro

  Host_vmnet8_IP_Address = 192.168.51.1

  Queue_Name_of_target_Printer = HP_LaserJet_4050

  So, either of the following examples work in my Windows XP Virtual Machine.

  http://MacBookPro:631/printers/HP_LaserJet_4050
  
  http://192.168.51.1:631/printers/HP_LaserJet_4050
  

• So sick of problems of synchronization with Lightroom

  Is it just me, or is it with every single update to Lightroom which synchronization between office and mobile work... and refuses to sync anything.

  This is becoming a real nuisance... so tonight I think give up on Lightroom altogether... Why is it so hard to get it to work correctly and that they way you want what it?

  Come on Adobe... enough is enough... either give the user more control on what to sync... and more important still how and when... or remove the feature... like at this moment in time... its completely useless for me to use!

  Please follow the steps below.

  > Click on the link below to check if your computer has synchronized the images or not.

  Adobe Photoshop Lightroom

  > Sign in using your email address and password

  > Click on the pictures in the upper left side and check if you have synchronized from the desktop images.

  If not,

  > Launch Lightroom

  > Click Help > log out

  > Quit and relaunch Lightroom

  > Please reconnect to lightroom.

  > Create a new collection of test and try to sync.

  Let me know if it helps.

  ~ UL

• Problems of colors with Lightroom

  I have so far used Photoshop Elements with great success to catalog and change my jpg photos collection.   I recently bought a camera capable of taking RAW photos and was advised to get Lightroom to manage this.   I imported my collection of jpg into the Lightroom Catalog and was horrifed to how they see that preview (grid and Loupe).   They (very underexposed) much darker look, and the color balance has changed radically.   I need to adjust significantly to get them looking for same in PSE10.   It seems that I can't use LR to manage my existing collection.  Y at - it something I am doing wrong?

  Make sure that you do not apply an import preset or auto-ton of the adjustments. You can consult it by clicking on:

  Edit > preferences > Presets tab (Lightroom > preferences > tab Presets on Mac OSX)

  You can also try clicking on that button Reset all development default settings to see if that makes a difference.

  Basically, LR is a managed application of color and when you upload a jpeg file, all cursors in the develop module should be set to zero.

• Illustrator CS2 print help - Epson R1900

  Hello
  I was printing to my Epson R1900 without any problem since Illustrator CS2 on my Macbook for a year without problem. I got a new Macbook, only a little more recent than the last, reinstalled Illustrator, and my print quality is now in the gutter. I tried to adjust the print settings, that I never had to do before, and it is still very poor. What I am printing are a few graphics, I've drawn on the screen. No images. In the output of print presets section, I can't resolve anything except reading or left reading right. Can anyone help? I don't know what has changed. All printer drivers are the same and are installed. The traits of lines look pixelated, as does the text. I know I could do "Vectorize" to improve the sharpness, but I never had to do that before, and I want to be able to edit the text later.

  I hope someone can help.
  Thank you for your time.
  Keli

  Upgrade you your operating system as well and that's what has changed you will not be able to print the epson R1900 with smooth curved lines or smooth paths.

  Simply not possible in the most recent operating system above 10.5.

  That's what you need to do, print from Acrobat or if you rasterize the art and print that.

  Or save a psd raster and print from Photoshop.

  Or buy a software RIP.

• Problem with Lightroom and printer Epson

  I suddenly have problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5 and have an Epson Stylus R2400 Photo. I use this combination from the beginning without any problem. Now all of a sudden when I try to print I get an error message that says media is released or not loaded properly. Is the case. I tried to restart my computer, the printer, and all I can think about, but nothing works. I can print from other applications without problem, so I guess it's a problem with Lightroom.

  Someone knows something similar? I was going to uninstall lightroom and do a reinstall, but I can't find my installation disk. Now I am at a loss to figure out what to do.

  Thank you

  Craig

  Try to remove your file and/or print templates.

  Lightroom is unique in many other programs that it saves and restores the settings of the printer. Some bad data may have tried to be passes. Could contribute to a 'new beginning '.

• PES 9 printing with Epson printer problem

  Hello

  I use PSE 9 with Windows XP and printer Epson 3880. I have re-installed all the programs/drivers a couple of times. Dialogue of PSE9 printer don't print choose "let Photoshop manage color".  He let me only print with "Let printer manage color."  I am using Epson papers.

  When I select 'Let Photoshop manage color', a box appears saying "ICC profile is no longer available" and it won't let me print.  Is it a problem of PES 9 or Epson problem?

  Thank you!!!

  Well, I actually found the answer. I spoke to a representative of Epson!

  I used to have the Epson 2200 printer, then the Epson 3800 printer, and now I use the 3880 printer under Windows XP and Windows 7 on my laptop.

  When you uninstall the other 2 printers, color profiles are still in your program files and can be damaged.

  That's why, in PSE 9, when I checked the box let elements Photoshop manage colors, it woildn can't print and instead it was the pop-up box "ICC profile is no longer available" because he was trying to access the old paper profiles and not those who came with the 3880. I uses paper Epson, is told by the way.

  The solution was to go into the drive C, Program Files, System 32, spool, drivers, color, and opens to the ICC profiles used by the printer. Then I deleted the old paper profiles associated with my older printers.

  And it worked!

• Printing problems with my printer Epson Stylus NX510 wireless.

  original title: Wireless printer issues...

  Help!  My router died and I work from a Home Office, so I use a wireless on loan from my ISP... it is a temporary solution until they can get out of my house and install a new router. My internet is fine, however, my printer/scanner/copier wireless wouldn't work. So........ I uninstalled and installed using the new wireless 'name' to save it. It allows to copy, but not print from my computer. The computer recognizes it but it says it is offline connection and guard my documents in what. In addition, my Epson Stylus NX510 printer still displays a page with my ink level and tells me that it is printing this page appears but does not read my ink level and it says that my printer is ready to print. My wifi lite is on the printer...

  any suggestions?

  Thank you!

  Jodi

  Hello

  1. What is the operating system installed on your computer?

  2. What is the exact error message you are getting?

  Please follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Problems with printing on Epson Stylus NX420

  I can't print on my Epson NX420 printer although drivers downloaded successfully etc. Help?

  Model number EPSON Stylus NX420.

  Method 1:
  You can refer to the links below and use the troubleshooters. Check to see if it lists and help to solve any problems: open the printer Troubleshooter:
  Epson support - drivers, FAQS, troubleshooting, Technical Support, Documents & manuals for Epson - Epson America, Inc. products.

  Method 2:
  You can check if you have the latest drivers installed for the device. You can check the link to get the latest drivers and tick below
  

  Hope this helps.

• CC with Adobe Lightroom and Photoshop CC - printing problems

  I have a printer Canon Pixma Pro 100.  All of a sudden I have printing problems I've ever had before.  It seems since the last update.  If I want to use the paper 4 x 6 in the Lightroom print Module, the printer will print the 4 x 6.  If I want to print 4 x 6 paper 8 x 10, it prints 4 x 6 but much info on the image of the cultures.  If I print an 8 x 10, etc, the same issue of culture exists.

  Now for a dirty word.  If I print off On1 / 10.5 I have zero printing problems.  If I print on any program be it word processing, image processing software, I have no problem.

  I only get these problems when printing out CC Lightroom or Photoshop CC.  Quite honestly, I have the latest version of items, but he tried not to frustration.

  I went on Canon's site and they have a new driver for El Capitan and say that Apple should have loaded in their updates.  I did all the updates.  My Canon firmware is up-to-date.

  I reloaded even Adobe software and the same problem.

  Any help would be appreciated.

  Elliot Stern

  [email protected]

  It's Apple 10.11.5.  What do I get for the automatic upgrade.

• Printer ICM Epson Stylus Photo 2200

  New computer with window 8 64-bit.  Epson Stylus Photo 2200 printer installed.  Download windows driver epson15163.exe with stylus driver v5.93 8 update.  "After setting Photoshop manages color for printing, then on the Advanced tab, stressing the ICM causes the error message:" host driver printer for application has stopped working. "Any resolution available?  May not be able to print image by allowing the printer manage the colors.

  I think I found a work around. I am also having this problem. I went on board > view devices and printers > select the Epson 2200 printer properties * NOT of PREFERENCES * (click you will get a menu select this option for at right) > advanced > default printing is > click ICM > click No. color adjustment > select the other details for the print job > click on save the setting > give the setting a name and click Save > NOW , pass the impression of photoshop printing parameters and apply them saved setting you just created and it needs to change so that the two "ICM" and 'No. Color Adjustment' clicked.

  I searched everywhere for a fix, the explanation or her work around for this and I have not found anything. I think that it is a problem of 64-bit Windows 8... but it could be just us, too. Let me know if this worked for you!

  I work with 8 64-bit WIndows, run Adobe Photoshop CS2.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• Printer inkjet Epson Stylus C 45 refuses to recognize refilled ink cartridge. How to solve this problem?

  I have the printer inkjet Epson stylus C 45. When an ink cartridge Epson gets sold out and I replace this cartridge with an Epson cartridge refilled, the printer does not recognize this refill cartridge. As a result, no printing could be done. Is there a way to make the printer accepts the reloaded cartridges?

  Hi Pradip Kumar Bhattacharjee,

  You receive messages or error codes?

  It is a hardware problem. It seems that some printer settings must be modified to get the cartridge that is recognized by the printer.

  You can get in touch with Epson support and are looking for the same thing.

  Epson Stylus C45 troubleshooting, manuals & tips and tricks

  Epson support

  You can also check out the link to the thread and see if it helps:

  printer does not recognize the ink cartridge