Printing to a printer from a virtual computer network

Similar Questions

• I am not able to print from my 2nd computer. I use Verizon Fios and I use a Belkin Wireless connection to connect to the router

  I can't print from my 2nd computer.  I use Verizon Fios to communicate with a wireless router (Belkin) (main? / main thru?).  I have 2 computers that access my internet connection.  The 1st computer that is in the same room as the router "verizon" and the printer is capable of printing.  The 2nd Bureau is not.  But there is good communication with the internet.

  Would it in my settings that could very well be the problem?

  Hello

  1. what operating system is installed on your second computer?
  2. has been the second computer can print very well without any problems in the past? If Yes, you did any hardware or software changes before the show?
  3. that you get an error message when you attempt to print from the second computer?
  4. What is the brand and model of the computer and the printer?

  Please provide us with more information about the issue so that we can help you better. Visit the link below and send your request.
  Suggestions for a question on the help forums:
  http://support.Microsoft.com/kb/555375

  In the meantime, you can refer to the links below.

  Troubleshoot network printer in Windows Vista and Windows 7:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Resources for the resolution of the problems of printer in Windows XP:
  http://support.Microsoft.com/kb/308028

  Kapil Purohit - Microsoft

• Get the data from a virtual computer store

  I'm looking to get the data from a virtual computer store, but format to be used with vmrun.  My current vmrun statement is:

  vmrun t CR h < IPAddress > https://: 443/SDK u & lt; username & gt; Pei & lt; password & gt; runProgramInGuest "[& lt;. datastorename & gt;] & lt; datastorefolder & gt; / & lt; virtualmachinename & gt;. VMX' c:\myscript.bat

  The idea is to replace & lt; datastorename & gt; given with the name of the LUN that is running on a virtual machine.  In this case, I'm running my statement vmrun from inside a script PowerCLI.  I can use a variables powerCLI, if the vmrun instruction can take and use all escape sequences are needed to adapt the format vmrun to this argument.

  That is right.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Remove a hard drive from a virtual computer running

  Hello everyone. Is there a way to remove a hard drive from a virtual computer running? Of course we can add a disk to a computer that is incredibly convenient, but there are times that we blow an as well. When clicked on the drive in the VI Client button is grayed out delete. I would have thought that other people would want to do that as well, but looking around the net and forums I find nothing!

  Its not feasible in 3.5 and below.

  Haven't tried yet in 4...

  -Matt

  VCP, vExpert, Unix Geek

• printing from a Samsung computer

  Printing from a computer to an HP 6700 samsung.  On the file menu after touching printing don't preview, no preview and after hitting No. Print print. What I am doing wrong?

  healey100

  Welcome to the Community Forum of HP.

  I don't know what you're doing wrong; I can offer the following in the hope that it might be useful.

  The problem is probably not directly related to your printer - print preview is driving application as it is the environment that helps choose the configuration of the printer.  In general, your environment must be set first - in other words, the printer must be installed, by default, selected on the network and ready to go - and then applications can use it.

  First of all, if you have not already done so, please install the full function of the printer software:

  Install full software features - OfficeJet 6700

  Make sure that your 6700 printer is assigned as default printer - assuming that it is the only printer on your network, this happens automatically.  However, if you tend to move everything from one place to another, maybe this isn't the case - you can verify that the printer you expect to see is indeed the "default".  In this case, you want this printer to the HP Officejet 6700.

  Control Panel > set display icon > devices and printers >

  Right click on your printer > ensure / select as default printer

  More info on print preview

  Change size print with preview before printing

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• HP Photosmart all-in - one a 309 will not print from the main computer in network

  PULLING MY HAIR OUT and have spent endless hours trying to figure this one already, so any advice will be appreciated! This 'deal' of a printer had problems in time over the 18 months or so I got it, but this one takes the cake. My HP Pavilion 6140, Windows 7, 64-bit, isn't wireless, but is connected to a router. My 309 a is wireless, but is in the same room near my computer and is recognized on the network. My husband's computer is sitting across from home in his office and can print wireless from my printer. Sitting here beside him, I can't print anything. We were able to print test pages from it to my computer, but if I go to another file of any type of printing, the printer does nothing. We have uninstalled, reinstalled, tried drivers d/l. He tells us that we need a driver, but when we go to d/l, it says no driver needed, or your drivers are up to date. My crazy husband DID with the router last weekend, on the moment cela everything has started, but since he checked it out, and everything seems fine. Copy the scanner work very well, so printing them isn't a problem either. I can save a file from my computer to the network, run in there and shoot to the top of this file and send it to my printer to print. No problem.  So, can anyone please give me any suggestions as to why my computer is unable to send anything to the printer or the printer does not recognize. Control Panel says it all works well, and the printer is ready. If I go into the properties of the computer, it says "drivers for this device are not installed, code 28. We had other messages of error as well in recent days, but nothing has been solved little matter what we do. Also MY computer doesn't list MY printer in the choice IF I try to print, and it says "printer unknown error has occurred."

  HardBeatZ, I wanted to just say a last thank you for all your help with my computer/printer problems. I hope I won't need this forum in the near future, because once again, I had to choose a different password. Yikes! In any case, we've been on all the roller coaster of emotions these past few weeks. Once you and I spread the printer as being the problem, we have debated on buying a new computer or reload Windows. After shopping and comparison of computers and prices see on them, etc., we decided that we had nothing to lose. So we borrowed an external drive and loaded important data and reinstalled Windows. Once we did that, we could still see the printer on the network, and it would still print from her husband's computer, but not mine. However, it DOES not seem to take care of other issues, and the dreaded exclamation point next to the PC icon has disappeared, so I'm gutsy and reinstalled the printer. For some reason, it still does not work wireless from my computer (which he always did), but I plugged the USB cable and returned to printing, scanning and faxing capabilities. so, I hope that all is well now, and except for paying ridiculous shipping for return monitor (still in warranty) which is released before printer problems, we did not have to shell out the $$$ for computer or printer. Monitor is shipped to me right now, so here's hoping that $$ on shipping was not in vain. Now if only we could be repaid in $$$ for the moment, concern and effort we all time put them into this mess. It WAS definitely a learning experience, even if, in the future, that I'll be a lot less worried to the excavation to solve problems. Thanks again for your time and patience.

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• PC says my printer offline. Fine prints from my other computer

  PC says that my printer is offline. Nothing will be printed. If I use my laptop everything prints fine. It is the same printer. I went to the store and said this problem has been solved now. He is not fixed. I uninstalled and reinstalled. Nothing. Printer appears in the devices so I know what exhists. It simply doesn't get it.

  Hello

  1. What operating system is installed on the computer?
  2. How is the printer connected to the computer?
  Method 1:
  You can follow the procedure in the article.

  Printer problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  To work around the problem, you can follow the steps in the article.
  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer
  http://support.Microsoft.com/kb/2027593
   
  Method 3:
   
  See also if the printer settings are correct.
  Share a printer
  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer
   
   
  See also:
  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
   

• Print from Win7 on XP network

  I have a new laptop Windows7, my office is an old Windows XP based system.  I would like to print from my laptop using the printer on the XP.  The printer is a HP 8250 in very good condition. The printer is set up for sharing, but what else to do to achieve this?  My printer is on my XP computer.  What other settings should I set?

  Thank you

  You'll need to download/install driver Windows 7 for HP 8250 printer before you connect to the printer.  To do this, go to www.hp.com, simply click on "Support/Drivers" and then select "Download drivers and software.  Enter "Photosmart 8250" in the product window, and then click 'Go '.  Continue to download the driver and install it on your Windows 7 machine.  If the driver does not install the printer as part of the driver installation, you may need to go to "start-> devices and printers-> add a printer."

  HTH,
  JW

• Strange problem after moving from the virtual computer to a new data store

  I am migrating our VM existing (8 in total) a 'problem' RAID to a new table on a new controller and am having a strange problem. Here are the steps I took (host OS is Ubuntu 8.0.4 LTS x 64):

  (1) off the power the virtual computer from the Web interface

  (2) the directories created for each virtual on the new RAID array computer (in this case a RAID 10 array on LSI 9750-8i controller)

  (3) rSync used to copy the data from RAID1 to be RAID2

  4) has created a new data store on the new RAID through the Web Server of VMWare user interface.

  (5) removed VM of the inventory through the Web, their return, added user interface then choose files .vmx on new data store on RAID2

  They have all power save fine... but three of them are not accessible on the network. I can open a console in the Web Server of VMWare user interface and they all run normally... but I can't their ping or access the respective virtual machine Web GUI. It seems quite arbitrary that those who work and those who are not. In this case... the VM that don't work is a license Autodesk, a Squid proxy server and a VM of cactus. All three of these virtual machines are 32-bit Ubuntu Server VM (two 8.0.4 and a 10.0.4)... and are the only Ubuntu VM on this host. It must be signifigant but I'm not see how.

  If I delete these three virtual machines of the inventory again and add to their original location (on the RAID1) they light up AND work normally. A consultant that we were working seemed surprised, as he had also done this experiment with some of the older VMWare products. I don't see how it would be the physical location of the files of the virtual machine. Any ideas?

  We rely on the migration to ESXi soon but in the meantime, we get these a few VM out of this RAID array problem. I'm stuck.

  Depending on the application, it may be enough to reconfigure the IP parameters (they are very probably on DHCP now) for the newly detected virtual NIC.

  André

• Using Get - view instead of Get - VM for BusSharingMode from a virtual computer

  Yet again, another issue was with Get - view. I searched a lot of documentation, but still I don't get the logic how to find good properties that I need to use.

  In this case, I need to transfer this one:

  Get - VM | Get-SCSI controller. Where-Object {$_.} BusSharingMode - eq ˜Physical"} | Select {$_.} Parent.Name}, BusSharingMode

  in:

  Notice-EEG - ViewType VirtualMachine-Property Name,Config.NameofthePropertyforBusSharingMode

  I will be grateful if someone could provide a documentation (or at least give me an idea what to read to get oriented) on these properties and their format so that they can be used to Get-View.

  The closest thing I found is this one: http://pubs.vmware.com/vi3/sdk/ReferenceGuide/vim.VirtualMachine.html and the VirtualMachineConfigInfo: http://pubs.vmware.com/vi3/sdk/ReferenceGuide/vim.vm.ConfigInfo.htmlhttp://pubs.vmware.com/vi3/sdk/ReferenceGuide/vim.vm.ConfigInfo.html
  I guess that in this case, we are talking about VirtualHardware (SCSI controller): http://pubs.vmware.com/vi3/sdk/ReferenceGuide/vim.vm.VirtualHardware.html and still I cannot establish the connection.

  It is all documented in the VMware vSphere QAnywhere, but as the title suggests, this is a reference.

  The vSphere Web Services SDK Programming Guide is intendedas a learning guide.

  Only no VMware book that explains a bit more on the vSphere API and objects is the book of Steve Jin, called VMware VI and vSphere SDK: management of VMware Infrastructure and vSphere

  It is written for Java developers, but it explains the basic concepts.

  In this specific question, you must know that all devices connected to a virtual computer is located in Config.Hardware.Device.

  It is a loop through the devices and extract the virtual SCSI controllers, also with bus physics active sharing.

  Once you have, it's simple extract properties.

  foreach ($vm in Get-View - ViewType VirtualMachine - Name property, Config.Hardware.Device) {}

  $scsi = $vm. Config.Hardware.Device | where {$_-is [VMware.Vim.VirtualSCSIController] - and $_.} SharedBus - eq "physicalSharing"}

  {if ($SCSI)}

  $scsi | Select @{N = "VM"; E = {$vm. Name}},

  @{N = "Controller"; E={$_. DeviceInfo.Label}},

  @{N = "BusSharingMode"; E={$_. SharedBus}}

  }

  }

• I moved my printer from an xp computer to a new one with windows 7. It prints ok but I wonder

  HP Photosmart C4680

  I have used it with Windows XP and now have a new computer with Windows 7.  the person who connected just plugged and it seems to print OK but no HP locations appear on my screen such as the icons etc.  Do I have to insert the original disc and reinstall it or will be everything that does not work on Windows 7

  It worked fine after installing again.  Thank you

• To print from a virtual machine in VMware View

  I need to set up printing if the VMware View Client running on an xp system, some so that I can operate that this either through Group Policy.

  Post edited by: a.p. - adjusted/fixed the title

  Hello

  These topics should help you set up printing in view approx.

  Setting Up Location-Based printing - page 154 https://www. VMware.com/pdf/view-46-administration.pdf

  Set preferences for the virtual printer to windows printing function
  Clients - Page 100 www. VMware.com/pdf/view-46-installed.pdf

  -noble

• Cannot print from a virtual machine?

  Hello

  I'm using VMware Workstation 7 on a Workstation Windows 7 Professional.

  I have set up a virtual machine and fired successfully before.

  When I start the virtual machine, it does not connect to the printer and I press OK.

  When I press print in any application virtual machine, it shows that the document is printed.  I find that there is a print job in the queue of the virtual machine.  However, the State of the printer is "offline".

  When I change unselect 'work offline', there is an error message saying "there is an error found when printing the document XXXX to USB001.  Do you want to start or cancel the job.

  Is there something wrong?

  Your opinion is requested.

  Post edited by: TonyJK

  Obvious questions

  The printer is turned on?

  You can print to the printer by OTHER computers via USB?

  Have you done a realitiy check to make sure that the USB port is always enabled in the virtual machine?

  Did you try to uninstall, reinstall the printer driver / printer port?

• Print to local printer from the client computer

  Hi Dan
  Please help the following problem:
  How to send a print to the local printer of the client machine (or end-user) have activate additional services?
  The project is deployed on a server Linux with Oracle Enterprise BPM and Oracle WebLogic 10.3.
  Thanks for the help

  Hello

  If you want to print the presentation of the subject of a BPM, you can add a new button to the presentation with the label "Print". 'The Action' property for the button should just be changed to 'print '.

  You can choose a couple to print a PDF file. Easiest would be to add a link in your PDF presentation (assuming that the PDF would be on the server somewhere). Once they click on the link, the PDF file would come to the top and they could print the pup.

  Hope this helps,
  Dan