Printing with ePrint

Is it possible to send prints for my color laser printer via eprint and print on both sides of the page.

I'm trying to send a pdf document to the printer and print certain terms and conditions on the back of the page.

Also FYI: I tried printing this document from a windows using duplex print dialog box and printed it perfect. But as the printer will be located across the world that I really want to get this to work via ePrint.

The PDF file is generated programmatically and is fully automated so ePrint is the preferred option as I would that there is minimum participation of the user.

Also eprint works fine except not duplex

Hello

As you can find within the limits of service, listed in the section FAQ below, duplex is not supported by the ePrint service:

Duplexing (printing on both sides of the page) is not supported.

http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

However, try to use the HP ePrint driver Mobile to work around this limitation.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DS-104641-1&cc=us&DLC=en&LC=en&OS=4062&product=4083969&sw_lang=

You can perform remote duplex printing using this driver.

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • Stop messages when printing with eprint

    can I stop notifications by email of google when printing with eprint

    Hello

    Yes you can, you can connect to your ePrint account and disable it for each user:

    Kind regards.

  • LasrerJet P2015n: Low error when printing with ePrint to a LaserJet P2015n on iOS supplies

    "Hi, I'm using the HP LaserJet P2015n, which works very well, however try to print using ePrint on iOS 8.3 seems to cause problems. If the application finds the printer on the network, and try to print, it invites a mistake "we have detected you are low on supplies error" obviously is not the case, because it is more than 50% of the full and prints very well using the desktop computer. The printer error LED keeps blinking and won't not even respond to a request for printing office. It must be restarted to work again.

    Tried all kinds of reboot and reset. I also tried to find a solution with no luck, there is no updated firmware for this printer can be found as well.

    Any help will be very appreciated!

    @hussain316

    Thank you, based on the information you provided... the p2015 is not taken care of with ePrint. That's why whenever you send a print job for printing, the printer responds with error messages and you have to pick up then power cycle the computers can be printed successfully on it.

    If you want to start mobile printing, then you will need to upgrade to a new printer with function ePrint. Depending on your price range, the new m277 is a nice little printer and has this ability.

    Sorry

  • Digitization of the duplex and duplex printing with eprint? (with Officejet 8600)

    See this link http://bit.ly/UbkZOV: I have a question on the HP Officejet Pro 8600. I have a Mac and Mac OS x Lion installed: 1) how to scan HP scan3 2sided/duplex? There is no option to choose to scan duplex, I have installed duplex accessory and I checked in the system Prefereneces > Print & Fax > Open print queue > Configuration printer > driver > HP 2 accessory sides of impression. (2) how can I configure my eprint settings when I print through Google Cloud or to my email to the printer to print duplex/2sided? I have looked at the online account but couldn't find an option to print

    Hello

    Duplex scanning is done through the ADF (upper part of the printer). And duplex for Office Jet 8600 option availabe anymore and Premium models.

    Acceory double-sided for double-sided printing from your computer. But ePrint does not have this option. Heard running.

    Thank you for using the HP printers.

    Good impression

  • My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.

    My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.  I just get an error message when I go to the HP Eprint centre.  It prints the address email of the coverage, but nothing else.  The attachment is not sure that I can see.  I tried to send an attachment from my Mac and worked well.

    Thank you for your response and I am sorry for the delay to return to you.  I tried save the Pages document in a Word document and send it to the printer using ePrint but it is even.  That is to say the handout printed but not the attachment.  However, when we removed the accompanying document and sent the attachment in its own it has worked well for we have managed to solve the problem. Thank you very much.

  • HP Photosmart 5524: Unable to print A4 size with ePrint

    I'm trying for months, in order to print with pictures and photos ePrint, and the only result I get is a small peak, like 1/8 of the size of the paper.

    Yes, I tried everything. I resized the picture in Photoshop, reduced to A4 format and exported to JPG format. And it continues to print the same size.

    Can anyone help solve this, because I'm really tired.

    Thank you

    @alexisrufer

    You can stop fighting on this rock.

    Photos / Images / pictures are always printed as 4 X 6 inch (10X15cm).

    Open ePrint help and advice Page > HP ePrint >

    Under use ePrint > see

    EPrint settings / manage print ePrint settings

    ==============================================================

    Although not tested, perhaps you might have more luck if you embed the image in a file 'carrier' - maybe a Word or PDF document.

    Partial excerpt from the ePrint Using section > >

    Which attachment file types are supported?

    HP ePrint service will automatically print attachments for the following file types:

    • Microsoft Word
    • Microsoft PowerPoint
    • Microsoft Excel *.
    • Text (.txt) files
    • PDF
    • HTML
    • Images (bmp, jpg, png, gif, tiff)

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Can I connect a printer with a verizon 4G mobile hot spot

    I currently travel extensively and before buying a printer, I would like to know if it is possible to support a printer through my Verizon 4 G mobile hot spot?  My other devices, including an HP laptop work fine, including an IPAD 2.  If it is possible, what model x should be?

    dpinmsue,

    If you travel and take the hotspot and the printer with you, I would probably recommend the HP Photosmart D110a or the HP Photosmart Plus B210a just because these are two of the smaller printers ePrint capable so that they are the most suitable for travel.

    Just to remind, however, the hotspot technology is very new in retrospect. Although we have seen some success, so it is difficult to say that you will see success with all the hot spots in general.

  • What printer are eprint?

    I have HP deskjet ink advantage 4646 but I Don t know if I can connect with eprint, and I Don t know where on the web are that information.

    Thank you

    Thank you very much for the reply.

    OLILLOYD wrote:

    Hi Lucas1982,

    If your printer is the same as

    Printer e-all-in-one-HP Deskjet Ink Advantage 4646

    This printer supports ePrint.

    You need to connect the printer to a wireless network that has an internet connection.

    Now by clicking on the eprint to the printer icon, the printer will guide you in the process of registration of the ePrint.

    It will print a page of instructions where your get the printer in that

    Kind regards

    Oliver

  • HP C4780 printer with android nexus 7

    I have connected my HPC4780 printer to my 7 Nexus by WIFI and bluetooth, and it was working fine until recently.  now I can't print from my nexus, but don't know why.   It says HP plugin unavailable.   There has been some automatic updates HP lately and I wonder if that's the problem.  When I search for devices, now there is no HP printer.

    Hi Bogcotton, welcome to the Forums of HP. In order to clarify the printer does not have an option of Bluetooth connectivity, so it will take WiFi.
    Try power cycling it, start by unplugging the router, turn off the printer and tablet. Once the 30 seconds are obsolete, plug your router into. When the router comes back online, turn on the printer. When the printer has found its network connection, re - turn on your tablet. Try printing again.

    What printing solution do you use with the Nexus? You use the built in HP Printing for Android 4.4?
    Here are some additional documents on the impression of the tablets.
    4.4 Android (KitKat) and later versions: printing with the print Android Solution
    Printing from your Android with non-Web-Enabled printers (No HP ePrint Support)
    With the help of Google Cloud Print with your HP printer

    Let me know how it goes.

  • How can I Poster Print with photosmart 7520

    I am a poster and I used poster printing with all of my Hp printers, but my Hp Photosmart 7520. How can I post print with photosmart 7520 use eprint and if not what can I use use the USB cord for poster printing?

    The steps are quite the same, next to another step in the dialog box:

    1. Of devices and printers, click Add printer, and then select a local printer.
    2. Keep the preseleted port LPT amd click on next.
    3. Select HP from the component manufacturer, and then select the HP Deskjet 6940 series in the list of printers.
      Note: If the model is not listed, click the Windows Update button, let several minutes to complete, then it should be listed.
    4. Complete the wizard and confirm the changes.
    5. A newly added the 6940 right-click and select printer properties, open the ports tab and select the port with the printer otiginal model listed in the column of the printer (HP Photosmart 7520 for example), and then click OK.
    6. Poster printing should now be available in the tab of finishing (under Pages per sheet) and posters using the HP Deskjet 6940 printer.

    Please let me know of any questions,

    Shlomi

  • HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

    This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

    Hi Hank, there.

    Sorry to hear that you are having a rough go with the printer.

    With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

    1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

    2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

    3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

    Hope this helps

  • Google Cloud Print with HP 1102w problems

    I have a HP 1102w printer that I'm unable to put up with Google Cloud Print.

    What does not work:

    * After I register the printer with google cloud print successfully, it sends a test page. The test page is indefinitely in the google cloud print queue. HP eprint site indicates the work received in vain (under recent print jobs).

    * I also tried printing from Gmail on Android and the same problem occurred (see google queue, error indicated on the list of recent jobs HP eprint)

    What works

    * Print e-mail address eprint printer

    * Airprint of iPa

    Conventional printing over wi - fi local networ

    Details

    * I have updated the firmware to datacode: 2011082

    * HP eprint is enabled on the printers web pa

    * I do not have a proxy serv

    This widget could not be displayed.
  • printing with wifi

    Hello

    I was wondering if I put my 8600 Pro Officejet printer Conect to wifi that means internet will be all the time or he only be connected when we print something. Only, so we have a lot of time on our internet otherwise it costs more, and we don't want that. Hope you can help us.

    Thank you unchainedmelody

    Hi unchainedmelody,

    Welcome to the HP Support forums.  I think you are asking you if you connect your Officejet Pro 8600 to your wireless network if it will hire additional internet charges.

    The answer to this question depends on how you have your wireless network and internet access put in place. It also depends on who has the Officejet Pro 8600 that you configure.  For example, if you enable web services use ePrint, it requires internet access to work. If you are unsure about your internet use and installation, I would recommend that you set up the printer with a USB connection.  Who will ensure that you are in control of when the printer is connected to the internet.

  • Sudden issue with eprint & allowing any application or web services

    Hi all

    I have a case with HP and spent 4 + hours on the phone with support eprint people and people of departmental support. Unfortunately, they are now gone for the weekend, and I'm still stuck here with a defective system - and have to leave this weekend on businesses (need a business printer works!)

    I hope someone here can help you.
    I have a x576dw MFP

    Connected to a Netgear router hardwired

    Worked very well with eprint services (set up and printing of daily) for 1 + months

    23:00 last night, I sent several jobs to the printer and I noticed today that they were not there. I checked the print server web printers and find that the IP settings had not changed (of course) when he worked the day before. The same IP address, DNS, default etc. same gateway.

    I ran through all the scenarios/patches that I could find online, to change to the evolution of tests and test with DHCP, changing to wired & test with static and wireless Wi - Fi but a different outside the range of the DHCP IP address, change the router to which the printer is sitting on (I have 3 routers), change the config to link change the primary DNS and secondary only be both addresses from Google (8.8 and 4.4), etc etc.

    ePrint crossed (frustrating) exactly the same steps with me and decided that it was a printer problem. They handed me off the coast for the guys from companies who wanted to do exactly the same steps as for the moment (of course). I did just to get through... (note that I can print correctly on the LAN of all routers), and at the end of technical support told me to try a restore to default settings and start over.

    Do you have this (gr) - same error. When I go to the same activate eprint or apps that it says "Web Services could not be activated". I get the same error on the web interface for the printer.

    Help! IM at a loss total here and HP wants to blame the eprint team, the eprint team wants to blame business solutiosn HP!

    (Other notes... I have checked the firmware, it is updated. I checked also up-to-date web software)

    Frustrated to tired business chick!

    Hey, happy that we were able to work.

    I will contact you on the subject to find the failed unit on your part. We will send to a R & D facility.

  • what printers work with eprint

    what printers work with eprint

    Any printer listed in this document HP.

Maybe you are looking for

  • Is there a fix for when the Chinese characters appear to "take back" the menu bar (s)?

    Periodically, I notice that the menu bar was "taken over" by these characters, making the navigation and use of the functions difficult or impossible. Close the program and then by reopening sometimes solves this problem for a while, but then it happ

  • I updated my iPhone 6 iOS 9.3.2 and I will have many questions.

    May 19, 2016, I've updated my iPhone iOS to iOS 9.3.2 9.3.1 6. Initially he "BRICKS" on me. It would not be completed the update. Then he went into a continuous cycle of trying to update. And then he "restored" factory default with the downloaded 9.3

  • On my time capsule airport

    Hello I have a problem with my Time Capsule 802.11ac airport I was using it OK but after that I got a new modem from my ISP I can't connect to internet and here is a picture of the problem Can someone tell me what is happening?

  • Portege M400: install iPod ask drivers

    When I install the new hardware Installation Wizard iPod arrives and ask a pilot. As the iPod is a USB device, it doesn't have a specific driver. Apple make sure it is a problem specific to this computer - a portege M400. Any suggestions? Anyone had

  • HP Slate 7 Extreme (4.4 Kit - Kat)

    The only thing that keeps me back to buy the HP Slate 7 Extreme is the lack of support and information. Where is 4.4 Kit - Kat on the extreme 7 slate? I tried researching it, and all I see are empty promises from months before.