privilege level of the AAA RADIUS server control

Similar Questions

• Configure the read-access via user-defined privilege level

  Hello everyone,

  I m looking for the best configuration to restrict a user read-only. The restriction must be configured through CLI not GANYMEDE.

  Material: 3750 (probably not interesting for that matter)

  More old IOS: 12.2 (53) SE1

  The user should be allowed to:

  • See the running configuration
  • trigger all sorts of orders-show
  • Ping and traceroute of the device

  The user should not be allowed to:

  • Download/delete/rename files on the flash memory
  • Enter the level 15 (not sure if I can avoid it)
  • all orders despite those level 1 and those specified above

  Can someone help me with this?

  Thanks in advance!

  I have won´t forgotten messages useful rates

  Hi Tobias,.

  You can

  set up multiple levels of privilege on a switch as explained below.

  By default, the Cisco IOS Software has two modes of password security: user EXEC and

  Privileged EXEC. You can configure up to 16 levels of commands for each mode.

  By configuring multiple passwords, you can allow different sets of users to have access to

  specified commands.

  For example, if you want many users to have access to the clear line command, you can

  He attributed a level 2 security and distribute the level 2 password fairly widely. But if you

  want more restricted access to the command configure, you can assign security to level 3

  and distribute the password to a more restricted group of users.

  Definition of the level of privilege for a command

  Beginning in privileged EXEC mode, follow these steps to set the privilege level for a

  control mode:

  Purpose of command

  Step 1

  Configure the terminal

  Enter global configuration mode.

  Step 2

  level privilege mode level control

  Set the level of privilege for a command.

  For mode, enter set for the global configuration mode, exec to EXEC mode, interface

  for the interface configuration mode, or the line for line configuration mode.

  For level, the range is from 0 to 15. Level 1 is normal user EXEC mode privileges.

  Level 15 is the level of access allowed by the enable password.

  For command, enter the command that you want to restrict access.

  Step 3

  activate the password level

  Specify the password to enable for the privilege level.

  . For level, the range is from 0 to 15. Level 1 is normal user EXEC mode privileges.

  Password, specify a string from 1 to 25 alphanumeric characters. The string cannot

  start with a number, is case sensitive and allows spaces but ignores leading spaces. By

  by default, no password is defined.

  Step 4

  end

  Return to privileged mode.

  Step 5

  Show running-config

  or

  Show privilege

  Check your entries.

  The first command shows the level of the password configuration and access. The second command

  Displays the privilege level configuration.

  Step 6

  copy running-config startup-config

  (Optional) Save your entries in the configuration file.

  When you set a command to a privilege level, all commands whose syntax is a subset of this

  control can also be programmed at this level. For example, if you set the show ip traffic command

  level 15 show commands and show ip commands are automatically set to privilege level

  15 unless you set them individually at different levels.

  To return to the privilege by default for a given command, use the no privilege mode level

  control of level global configuration command.

  This example shows how to set the command configures to focus on level 14 and set

  SecretPswd14 as the password users must enter to use 14 level controls:

  Switch (config) # level 14 exec privileges set up

  Switch (config) # enable password 14 SecretPswd14 level

  You can also change the default privilege for every user level.

  Change the level of privilege by default for lines beginning in privileged EXEC mode follow these steps to change the default privilege for a line level: complete order

  Step 1 Configure terminal enter global configuration mode.

  Step 2 line vty select the virtual terminal line to restrict access.

  Step 3 privilege level change the default privilege for the line level.

  For level, the range is from 0 to 15. Level 1 is normal user EXEC mode

  privileges. Level 15 is the level of access allowed by the enable password.

  End of step 4 back in privileged mode.

  Step 5 show running-config or show privilege

  Check your entries. The first command shows the level of the password configuration and access.

  The second command shows the privilege level configuration.

  Step 6 copy running-config startup-config (optional) save your entries in the configuration file.

  Users can replace the privilege level that you set by using the privilege level line configuration command

  you connect to the line and enabling a different privilege level.

  They can lower the privilege level by using the disable command.

  If users know the password to a higher privilege level, they can use this password to enable the higher privilege level. You can specify a privilege for your console line level to restrict the use of the line or high-level.

  To restore the default line privilege level, use the no privilege level line configuration command. Also I send you a document for your reference.

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/cat3750/12225see/SCG/swauthen.htm #wp1154063

  HTH

  Concerning

  Reem

• Problem to get the startup-config under the privilege level

  Hi guys

  I use the level of privilege 15.2 and in this version, that I can not get the startup-config under some of IOS (in this case, IE 7)

  I have no problem to get it from the earlier version, also to 15.1

  Router #sh privileges

  Current privilege level is 7

  Router #sh startup-config

  With the help of 4414 262136 bytes

  % Error opening nvram: / startup-config (Permission denied)

  Config:

  privilege exec level 7 show startup-config

  privilege level exec 15 see the configuration

  show privileges exec level 1

  When I added cmd ' privilege exec level 7 show startup-config ', IOS generated automatically new line "privilege exec 15 level show configuration.

  seems that there must be an "improvement" under versions of 15.2

  Any ideas?

  Thank you

  Pet

  Hello

  I have faced the same problem and opened a folder. Please find the answer I get from the TAC:

  ==============================================

  This is designed by design as a security measure. Starting in the new versions of IOS, the privilege level of access to system files must be configured separately. There are two options to solve this problem:

  (1) run the command at the prompt to activate it.

  (2) set the privilege level of the file system via the config command "file privilege X" with X the number of privilege level

  ==============================================

  Hope that helps.

  Best regards.

  Karim

• urgent: cannot open a session to pass after the microsoft Radius for logon conf

  Hi forum,

  I can't connect my switch after you set up the connection with microsoft Radius, my setup is as follows:

  password username privilege 15 7 nwadmin

  password username privilege 15 7 yeopaul

  AAA new-model

  allow group AAA authentication login default local XXXRADIUS

  RADIUS AAA server group XXXRADIUS

  Server X.X.X.X

  ACCT-port RADIUS-server host X.X.X.X auth-port 1645, 1646 timeout 60 broadcast button 3 XXXXX

  =====================================

  on the microsoft radius server, I can see the security event that authentication was successful. However, the system event show the connection failed, reason: the attempt of the user to use an authentication method that is not enabled on the matching remote access policy.

  How can I get access to the switch? (this is my main switch running HSRP with another)

  What could be the cause of this problem?

  Appreciate your help.

  Thank you and best regards,

  Paul

  I suspect that the remote access policy is not configured on the IAS server. Please follow the link to create the remote access policy:

  http://technet2.Microsoft.com/WindowsServer/en/library/89772aab-db97-47a7-b806-042061189fa61033.mspx?mfr=true

• focus on support of permission level on the ray on nexus 9000 running 7.0 (3) I1 (3)

  Dear experts,

  I'm trying to configure support for privilege level of authorization on RADIUS on race nexus 9000 7.0 (3) I1 (3) and I get the following message is displayed:

  Orders for authorization of aaa Tor-SW-CAB-B (config) # default RADIUS local group

  Group of RADIUS is not supported for approval of order
  could not update the aaa configuration

  In addition, command "exec of RBAC authorization" not taken in charge.

  I want to configure the privilege level for the user add 'enable' password after login to the switch. And according to his privilege, he can/cannot change the configuration.

  I use ISE/RADIUS for authentication, authorization and accounting. The configuration as follows:

  Group AAA authentication login default RADIUS
  default group AAA RADIUS accounting

  Same ISE/RADIUS configuration works very well with other cisco switches/routers in the network.

  Comment on how to fix this problem is highly appreciated.

  Best regards

  Mohammad Taamneh

  Hi Mohammad,.

  A couple of things to note:

  1 command authorization is not available with RADIUS. For example, if you want to use this feature, you can use GANYMEDE +.

  2 NX - OS doesn't "understand" privilege level. Indeed, user roles are used. For example,.

  shell:roles=network-operator vdc-admin 

  For more info check out the following document: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx-os/security/configuration/guide/b_Cisco_Nexus_7000_NX-OS_Security_Configuration_Guide__Release_6-x/b_Cisco_Nexus_7000_NX-OS_Security_Configuration_Guide__Release_6-x_chapter_0101.html Thank you for rating helpful posts!

• What do I have to apply RADIUS server?

  We intend to implement server GANYMEDE +.

  I need to know what exactly I need to set up this server? what I have to buy GANYMEDE + appliance based provider or I can just buy the software and install it on one of my new or existing server. is there any software to open source very good that I can use? What advantages and disadvantages of each options?

  I'm the management of hundreds of routers and switches on our society and on customer sites via internet.

  one last question: is Cisco ACS 5.5 material or can be installed in any server?

  I know it's very long or issues, but I know that you are very friendly and nice people :)

  1.] most of the large company or class operator network device manufacturers supported by GANYMEDE. Some providers that are supported on the GANYMEDE Protocol + are: Adtran, Alcatel/Lucent, Arbor, Aruba, Brocade/Foundry, Cisco/Linksys, Ericsson/Redback, Extreme, Fortinet, HP/3Com, Huawei, Juniper, Netgear, Nortel and others. However, I personally would say ACS 5.x

  Source - http://tacacs.net/faq.asp

  2.] cisco Secure ACS 5.5 is available as a closed and hardened based on Linux SNS 3415/3495 device or as an image for VMware ESX/ESXi 5.0/5.1operating system.

  Cisco Secure ACS 5.5 supports two distinct protocols for authentication, authorization and accounting (AAA): RADIUS access control network and GANYMEDE + to access network device control.

  3.] for more information about the product and the license, you must go through the links listed below.

  Order ACS 5.5 Guide

  Data sheet ACS 5.5

  Kind regards

  Jatin kone

  * Does the rate of useful messages *.

• Primary/secondary RADIUS server

  Hey all,.

  I tried to find out for awhile how primary and secondary RADIUS servers work about WLC 4400 s. If the primary RADIUS server goes down, and the secondary image is used, when the controller will return to the primary once it is up? He waits until the secondary breaks down, or done immediately switch back to the primary when it becomes available?

  Thanks in advance!

  The f

  On versions 4.2 and earlier, if the principal fails, then the secondary image is used until the secondary level is not available. So if you want the main for the radius server to use purpose, restart the secondary image. Then the tertiary then back to the primary. 5.0 has a feature in which you can define a Dungeon alive so that when the primary comes back upward, the primary will be used again. 5.0 code not a version of good code, however.

• RADIUS server two in 1 Cisco router

  Hello

  Just need to know if it is possible to use two RADIUS server in 1 Cisco router. The first server RADIUS authenticate remote users to access our internal LAN while the other RADIUS server will authenticate users who will have access to routers. The reason why we cannot use the same RADIUS server to authenticate remote users and users of router is due to our contract with our supplier (long story!).

  in any case, if it's possible, could someone help me how to do or give me the link to the documentation.

  Thank you

  Yes, it's the way to do it.  This gives you two different methods, the user.

  connection key radius-server 1.1.1.1

  RADIUS - 2.2.2.2 key server logon

  3.3.3.3 RADIUS server remote key

  4.4.4.4 RADIUS server remote key

  RADIUS AAA server telnet protocol group

  Server 1.1.1.1

  2.2.2.2 Server

  AAA-server group remoteaccess radius Protocol

  3.3.3.3 Server

  Server 4.4.4.4

  AAA authentication login default group remoteaccess

  AAA authentication connection group telnet

  line vty 0 4

  SUCH connection authentication

  Line con 0

  authentication of SUCH loging

  This is an example which will allow your access telnet to the router to use a server group

  while allowing your users to remote access use other radius servers.

  -Jesse

• The AAA authentication and VRF-Lite

  Hello!

  I encountered a strange problem, when you use authentication Radius AAA and VRF-Lite.

  The setting is as follows. A/31 linknet is configured between PE and THIS (7206/g1 and C1812), where the EP sub-si is part of a MPLS VPN and VRF-Lite CE uses to maintain separate local services (where more than one VPN is used..).

  Access to the this, via telnet, console etc, will be authenticated by our RADIUS servers, based on the following configuration:

  --> Config start<>

  AAA new-model

  !

  !

  Group AA radius RADIUS-auth server

  Server x.x.4.23 auth-port 1645 acct-port 1646

  Server x.x.7.139 auth-port 1645 acct-port 1646

  !

  AAA authentication login default group auth radius local

  enable AAA, enable authentication by default group RADIUS-auth

  ...

  touch of 1646-Server RADIUS host x.x.4.23 auth-port 1645 acct-port

  touch of 1646-Server RADIUS host x.x.7.139 auth-port 1645 acct-port

  ...

  source-interface IP vrf 10 RADIUS

  ---> Config ends<>

  The VRF-Lite instance is configured like this:

  ---> Config start<>

  VRF IP-10

  RD 65001:10

  ---> Config ends<>

  Now - if I remove the configuration VRF-Lite and use global routing on the CE (which is OK for a simple vpn installation), AAA/RADIUS authentication works very well. "" When I activate transfer ip vrf "10" on the interface of the outside and inside, AAA/RADIUS service is unable to reach the two defined servers.

  I compared the routing table when using VRF-Lite and global routing, and they are identical. All roads are correctly imported via BGP, and the service as a whole operates without problem, in other words, the AAA/RADIUS part is the only service does not.

  It may be necessary to include a vrf-transfer command in the config of Group server as follows:

  AAA radius RADIUS-auth server group

  Server-private x.x.x.x auth-port 1645 acct-port

  1646 key ww

  IP vrf forwarding 10

  See the document below for more details:

  http://www.Cisco.com/en/us/partner/docs/iOS/12_4/secure/configuration/guide/hvrfaaa.html

• In Active/Passive Mode Radius server configuration

  We set up (active/active) the two ASA load balancing.  We also configure two Radius servers with load balancing.  At present, the Radius servers are configured with active/active.  Is it possible to configure a Radius Server with (active/passive)?

  RADIUS protocol Radius AAA server
  AAA-server Radius (inside) host XXX.XXX.XXX.XXX
  Timeout 300
  key *.
  RADIUS-common-pw *.

  AAA-server Radius (inside) host XXX.XXX.XXX.XXX
  Timeout 300
  key *.
  RADIUS-common-pw *.

  AAA accounting enable console RADIUS

  Thank you.

  Diane

  Diane,

  Well I'm still not 100% sure that you understand exactly what is happening. Normally, on a single ASA, authentication is always performed on the same radius server until it fails (i.e. active/passive as you call it).

  Now, you mention that you have 2 ASAs in load balancing, so I don't know if you mean that:

  (1) 2 users that connect to the same ASA get authenticated by radius 2 servers different (should never happen)

  or

  (2) when 2 users connect to the cluster, user1 gets redirected to ASA1 and authenticated on Radius1, while User2 will be redirected to ASA2 using Radius2 to auth. This could be normal if both ASAs are set up differently (defined in a different order radius servers) or an ASA had a problem connecting to Radius1, at some point and so it considered out of service.

  In any case, 'sh aaa-server protocol radius' and 'debug RADIUS' can help determine why an asa individual does not use (initially configured) primary radius server.

  HTH

  Herbert

• Installation of Nexus 1000v / vCenter user privilege level

  Good afternoon

  I had a question about the necessary privilege concerning the installation of a Nexus 1000v.

  Last week, we install last version of the Nexus1000v on ESXi 5.0.0 Releasebuild-721882 switch.

  After a first installation, we noticed we could not establish the connection between the Nexus1000v and the vCenter [error = > the vCenter Extension key was not saved before use].

  The key was present on the Nexus 1000v but was not registered under the vCenter MOB (Extension Manager).

  We had to increase the privilege level of the service (to vCenter admin) account and re-install to get registred the extension key.

  Cisco said that we must use vCenter user with administrator-level privileges to install the Nexus 1000v, but please find my questions:

  1 / is it possible to install a Nexus 1000v with administrator privileges "Data center" (no admin vCenter). In general, what is the minimum level of privileges possible to install a Nexus 1000v?

  2 / once the privilege is passed to vCenter admin and the installation, it is possible to reduce to a privilege of lower level without affecting the Nexus 1000v?

  I'm a network guy, not a guy of sorry server if I'm unclear in my questions :-)

  Thanks in advance for your answers.

  Kind regards.

  Kara

  You cannot change the privilege level after the initial connection. He needs to remain at the same level of private.

  One of the things to keep in mind is that there is a constant back and forth between the MSM and vCenter. We are pulling and pushing data into vcenter. Every time a VM vmotions, gets turned on, destroyed or changed requires communication between the MSM and vCenter.

  Louis

• Username with the privilege level 15 bypass activation

  Hi experts,

  I guess I never really understand the process of authentication on Cisco routers and devices lol. In any case I want users privilege level 15 in order to be implemented in enable mode immediately after the connection, without having to type in the 'enable' command and activate the password. Users with other levels of privilege will still put in EXEC mode.

  AAA must be enabled because I use it as well for 802. 1 x.

  The privilege level will be eventually affected by the Radius Server, but at the moment, that the user is created locally on the switch. Right now I have:

  AAA new-model

  !

  username admin privilege 15 secret 5 $1$ $2bdl VIp53G4/zpo4f9aHh.t5v0
  cisco secret 5 $1$ GDDS username $ ehTUzwappJFMxgA7tM/YW.
  !

  line vty 0 5
  access-class 100 in
  exec-timeout 30 0
  Synchronous recording
  entry ssh transport

  And this isn't work lol. No matter, I login with "admin" or "cisco", I am put in EXEC mode. What should I do to achieve this?

  Thank you!

  On the issue of the cisco device the below listed order

  AAA authorization exec default local radius group

  On the radius if server the ACS or IAS

  The attribute of type of service like this

  service-type = administrative

  In doing so, the user will be beginning of landing in mode exec privileges #.

  Kind regards

  Jousset

  The rate of useful messages-

• Cisco 1812 no contact to the Radius Server

  Hi guys,.

  IM pretty new to cisco and plays with an 1812 products... I am trying set up an easy VPN server, with the support of ray and I can see that I did everything right, but there is a problem, because the router do not contact the RADIUS server and the RADIUS server has been tested ok.

  Anyone who can see what I'm missing? Worked with this problem for 3 days now.

  Here is my CONF.

  Current configuration: 9170 bytes

  !

  ! Last modification of the configuration to 13:44:49 UTC Tuesday, October 12, 2010

  !

  version 15.1

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  router host name

  !

  boot-start-marker

  boot-end-marker

  !

  !

  no set record in buffered memory

  !

  AAA new-model

  !

  !

  AAA server radius sdm-vpn-server-group 1 group

  auth-port 1645 90.0.0.245 Server acct-port 1646

  !

  AAA authentication login default local

  AAA authentication login sdm_vpn_xauth_ml_1-passwd-expiry group sdm-vpn-server-group 1

  AAA authorization exec default local

  AAA authorization sdm_vpn_group_ml_1 LAN

  !

  !

  !

  !

  !

  AAA - the id of the joint session

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-250973313

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 250973313

  revocation checking no

  !

  !

  TP-self-signed-250973313 crypto pki certificate chain

  certificate self-signed 01

  308201A 5 A0030201 02020101 3082023C 300 D 0609 2A 864886 F70D0101 04050030

  2 040355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30

  69666963 32353039 37333331 33301E17 313031 30313230 39343333 0D 6174652D

  395A170D 2E302C06 1325494F 03540403 32303031 30313030 30303030 5A 303031

  532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3235 30393733 642D

  06092A 86 4886F70D 01010105 33313330 819F300D 00308189 02818100 0003818D

  BCF94FB0 77240E92 B703CE70 556D5D22 A57823E5 DD4CD4C4 12D639DE 5E97DB2D

  81FBB304 9FA677A6 CAD84F96 9734081B F8F8FAAE 000B02FB AEF7C7B1 73AFA44B

  7D27E112 8991F03B 3D4FD484 34E2EA9F BD426F73 48778F2A AD35AAD6 EC00805D

  249B 8702 D545AEEA 40670DFD 3E6BEC29 EE48A0C6 CB7694FD 722D1A62 3A499CC5

  02030100 01A 36630 03551 D 13 64300F06 0101FF04 05300301 01FF3011 0603551D

  11040A 30 08820652 6F757465 72301F06 23 04183016 801462CB F6BD12F6 03551D

  080C8A89 F9FBBDCE 9751528A FFFD301D 0603551D 0E041604 1462CBF6 BD12F608

  0C8A89F9 FBBDCE97 51528AFF FD300D06 092 HAS 8648 01040500 03818100 86F70D01

  ACA87977 CF 55225 6 9147E57E 8B5A8CA8 46348CAF 801D11C6 9DA57C69 14FA5076

  6844F0CC 4CBEB541 136A483A 69F7B7F0 E44474E8 14DC2E80 CC04F840 B 3531, 884

  F08A492D 8C3902C0 725EE93D AC83A29F 799AAE0F 5795484B B3D02F84 911DB135

  5 189766 C30DA111 6B9B4E46 E999DA5B 202 21B0B9D4 HAS 6900 07A93D8D 41C7FD21

  quit smoking

  dot11 syslog

  IP source-route

  !

  !

  !

  !

  !

  IP cef

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  license udi pid CISCO1812/K9 sn FCZ10232108

  username admin privilege 15 secret 5 P677 $1$ $ Rggfdgt8MeD8letZDL08d.

  !

  !

  !

  type of class-card inspect correspondence sdm-nat-smtp-1

  game group-access 101

  smtp Protocol game

  type of class-card inspect entire game SDM_AH

  match the name of group-access SDM_AH

  type of class-card inspect all sdm-cls-insp-traffic game

  match Protocol cuseeme

  dns protocol game

  ftp protocol game

  h323 Protocol game

  https protocol game

  match icmp Protocol

  match the imap Protocol

  pop3 Protocol game

  netshow Protocol game

  Protocol shell game

  match Protocol realmedia

  match rtsp Protocol

  smtp Protocol game

  sql-net Protocol game

  streamworks Protocol game

  tftp Protocol game

  vdolive Protocol game

  tcp protocol match

  udp Protocol game

  inspect the class-map match sdm-insp-traffic type

  corresponds to the class-map sdm-cls-insp-traffic

  type of class-card inspect all SDM-voice-enabled game

  h323 Protocol game

  Skinny Protocol game

  sip protocol game

  type of class-card inspect entire game SDM_IP

  match the name of group-access SDM_IP

  type of class-card inspect entire game SDM_ESP

  match the name of group-access SDM_ESP

  type of class-card inspect entire game SDM_EASY_VPN_SERVER_TRAFFIC

  match Protocol isakmp

  match Protocol ipsec-msft

  corresponds to the SDM_AH class-map

  corresponds to the SDM_ESP class-map

  type of class-card inspect the correspondence SDM_EASY_VPN_SERVER_PT

  corresponds to the SDM_EASY_VPN_SERVER_TRAFFIC class-map

  type of class-card inspect all match sdm-cls-icmp-access

  match icmp Protocol

  tcp protocol match

  udp Protocol game

  type of class-card inspect correspondence sdm-invalid-src

  game group-access 100

  type of class-card inspect correspondence sdm-icmp-access

  corresponds to the class-map sdm-cls-icmp-access

  type of class-card inspect correspondence sdm-Protocol-http

  http protocol game

  !

  !

  type of policy-card inspect sdm-permits-icmpreply

  class type inspect sdm-icmp-access

  inspect

  class class by default

  Pass

  type of policy-card inspect sdm-pol-NATOutsideToInside-1

  class type inspect sdm-nat-smtp-1

  inspect

  class class by default

  drop

  type of policy-map inspect sdm - inspect

  class type inspect sdm-invalid-src

  Drop newspaper

  class type inspect sdm-insp-traffic

  inspect

  class type inspect sdm-Protocol-http

  inspect

  class type inspect SDM-voice-enabled

  inspect

  class class by default

  Pass

  type of policy-card inspect sdm-enabled

  class type inspect SDM_EASY_VPN_SERVER_PT

  Pass

  class class by default

  drop

  type of policy-card inspect sdm-license-ip

  class type inspect SDM_IP

  Pass

  class class by default

  Drop newspaper

  !

  security of the area outside the area

  safety zone-to-zone

  ezvpn-safe area of zone

  safety zone-pair sdm-zp-self-out source destination outside zone auto

  type of service-strategy inspect sdm-permits-icmpreply

  source of sdm-zp-out-auto security area outside zone destination auto pair

  type of service-strategy inspect sdm-enabled

  safety zone-pair sdm-zp-in-out source in the area of destination outside the area

  type of service-strategy inspect sdm - inspect

  sdm-zp-NATOutsideToInside-1 zone-pair security source outside the area of destination in the area

  type of service-strategy inspect sdm-pol-NATOutsideToInside-1

  in the destination box source sdm-zp-in-ezvpn1 ezvpn-pairs area security

  type of service-strategy inspect sdm-license-ip

  source of sdm-zp-out-ezpn1 of security area outside zone ezvpn-zone time pair of destination

  type of service-strategy inspect sdm-license-ip

  safety zone-pair sdm-zp-ezvpn-out1-source ezvpn-zone of destination outside the area

  type of service-strategy inspect sdm-license-ip

  safety zone-pair source sdm-zp-ezvpn-in1 ezvpn-area destination in the area

  type of service-strategy inspect sdm-license-ip

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group Sindby crypto isakmp client

  key TheSommerOf03

  90.0.0.240 DNS 8.8.8.8

  win 90.0.0.240

  SBYNET field

  pool SDM_POOL_2

  Max-users 15

  netmask 255.255.255.0

  ISAKMP crypto sdm-ike-profile-1 profile

  identity Sindby group match

  client authentication list sdm_vpn_xauth_ml_1

  ISAKMP authorization list sdm_vpn_group_ml_1

  client configuration address respond

  virtual-model 1

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp-SHA2-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA3-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA4-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA5-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA6-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA7-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA8-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA9-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA10-ESP-3DES esp-sha-hmac

  !

  Profile of crypto ipsec SDM_Profile1

  game of transformation-ESP-3DES-SHA10

  isakmp-profile sdm-ike-profile-1 game

  !

  !

  !

  !

  !

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  !

  interface FastEthernet0

  Description $FW_OUTSIDE$

  IP address 93.166.xxx.xxx 255.255.255.248

  NAT outside IP

  IP virtual-reassembly in

  outside the area of security of Member's area

  automatic duplex

  automatic speed

  !

  interface FastEthernet1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  !

  interface FastEthernet5

  !

  FastEthernet6 interface

  !

  interface FastEthernet7

  !

  interface FastEthernet8

  !

  interface FastEthernet9

  !

  type of interface virtual-Template1 tunnel

  IP unnumbered FastEthernet0

  ezvpn-safe area of Member's area

  ipv4 ipsec tunnel mode

  Tunnel SDM_Profile1 ipsec protection profile

  !

  interface Vlan1

  Description $FW_INSIDE$

  IP 90.0.0.190 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  Security members in the box area

  !

  local IP SDM_POOL_1 90.0.0.25 pool 90.0.0.29

  local IP SDM_POOL_2 90.0.0.75 pool 90.0.0.90

  IP forward-Protocol ND

  IP http server

  local IP http authentication

  IP http secure server

  IP http timeout policy inactive 600 life 86400 request 10000

  !

  !

  IP nat inside source static tcp 192.168.1.200 25 interface FastEthernet0 25

  the IP nat inside source 1 interface FastEthernet0 overload list

  IP route 0.0.0.0 0.0.0.0 93.166.xxx.xxx

  !

  SDM_AH extended IP access list

  Remark SDM_ACL = 1 category

  allow a whole ahp

  SDM_ESP extended IP access list

  Remark SDM_ACL = 1 category

  allow an esp

  SDM_IP extended IP access list

  Remark SDM_ACL = 1 category

  allow an ip

  !

  exploitation forest esm config

  access-list 1 permit 90.0.0.0 0.0.0.255

  Access-list 100 = 128 SDM_ACL category note

  access-list 100 permit ip 255.255.255.255 host everything

  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything

  access-list 100 permit ip 93.166.xxx.xxx 0.0.0.7 everything

  Remark SDM_ACL category of access list 101 = 0

  IP access-list 101 permit any host 192.168.1.200

  !

  !

  !

  !

  !

  !

  RADIUS-server host 90.0.0.245 auth-port 1645 acct-port 1646

  !

  control plan

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  transport input telnet ssh

  !

  end

  Hello

  Looks like you're missing the key from the radius server configuration "RADIUS-server host 90.0.0.245 auth-port 1645 1646 key your_keyacct-port»

  Thank you

  Wen

• Cisco Catalyst 2960-S switch configured for 802. 1 x sends a query to access the Radius Server Radius

  Setup

  Cisco Catalyst 2960-S running 15.0.2 - SE8

  Under Centos freeRadius 6.4 RADIUS server

  Client (supplicant) running Windows 7

  When Windows client is connected to the port (port 12 in my setup) with authentication of 802. 1 x active switch, show of Wireshark that catalyst sends ask EAP and the client responds with EAP response. But it made not the request to the Radius server. The RADIUS test utility 'aaa RADIUS testuser password new-code test group' works.
  Here is my config running. Any advice would be greatly appreciated.
  #show running mySwitch-
  mySwitch #show running-config
  Building configuration...

  Current configuration: 2094 bytes
  !
  version 12.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname myswitch
  !
  boot-start-marker
  boot-end-marker
  !
  activate the password secret 5 $1$ Z1z6$ kqvVYRQdVRZ0h8aDTV5DR0 enable password!
  !
  !
  AAA new-model
  !
  !
  AAA dot1x group group radius aaa accounting dot1x default start-stop radius authentication group!
  !
  !
  AAA - the id of the joint session
  1 supply ws-c2960s-24ts-l switch
  !
  !
  !
  !
  !
  control-dot1x system-auth
  pvst spanning-tree mode
  spanning tree extend id-system
  !
  !
  !
  !
  internal allocation policy of VLAN no ascendant interface FastEthernet0 no stop ip address!
  GigabitEthernet1/0/1 interface
  !
  interface GigabitEthernet1/0/2
  !
  interface GigabitEthernet1/0/3
  !
  interface GigabitEthernet1/0/4
  !
  interface GigabitEthernet1/0/5
  !
  interface GigabitEthernet1/0/6
  !
  interface GigabitEthernet1/0/7
  !
  interface GigabitEthernet1/0/8
  !
  interface GigabitEthernet1/0/9
  !
  interface GigabitEthernet1/0/10
  !
  interface GigabitEthernet1/0/11
  !
  interface GigabitEthernet1/0/12
  switchport mode access
  Auto control of the port of authentication
  dot1x EAP authenticator
  !
  interface GigabitEthernet1/0/13
  !
  interface GigabitEthernet1/0/14
  !
  interface GigabitEthernet1/0/15
  !
  interface GigabitEthernet1/0/16
  !
  interface GigabitEthernet1/0/17
  !
  interface GigabitEthernet1/0/18
  !
  interface GigabitEthernet1/0/19
  !
  interface GigabitEthernet1/0/20
  !
  interface GigabitEthernet1/0/21
  !
  interface GigabitEthernet1/0/22
  !
  interface GigabitEthernet1/0/23
  !
  interface GigabitEthernet1/0/24
  !
  interface GigabitEthernet1/0/25
  !
  interface GigabitEthernet1/0/26
  !
  interface GigabitEthernet1/0/27
  !
  interface GigabitEthernet1/0/28
  !
  interface Vlan1
  IP 10.1.2.12 255.255.255.0
  !
  IP http server
  IP http secure server
  activate the IP sla response alerts
  recording of debug trap
  10.1.2.1 host connection tcp port 514 RADIUS-server host 10.1.2.1 transport auth-port 1812 acct-port 1646 timeout 3 retransmit testing123 key 3.
  Line con 0
  line vty 0 4
  password password
  line vty 5 15
  password password
  !
  end

  interface GigabitEthernet1/0/16
  !
  interface GigabitEthernet1/0/17
  !
  interface GigabitEthernet1/0/18
  !
  interface GigabitEthernet1/0/19
  !
  interface GigabitEthernet1/0/20

  Have you run wireshark on the server because the request to switch? If so you make sure that there is a response from the server? For Windows network POLICY Server (I've never tried Centos), you must ensure that the request is related to a policy which then authenticates, or denies access. Usually, it is a matter of such attributes and the seller.

  Regarding the configuration, it seems a bit out of the AAA. Try to remove the:

  line "aaa dot1x group service radius authentication" and this by using instead:

  "aaa dot1x default radius authentication group". After the dot1x word you are supposed to provide a list of the authentication or the default Word if you do not want to use a list.

• Unable to switch to the privilege level using password set using ACS enable

  Hi all

  I am not able to not be able to visit the privilege level to help enable password set using ACS 1121 (5.4.0.46).

  Please find details of the ASA-

  ASA5580-20
  version of the software - 9.1

  LAB - FW / see the law # run | I have aaa
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + (inside) host 192.168.x.x
  GANYMEDE + LOCAL console for AAA of http authentication
  Console telnet authentication GANYMEDE + LOCAL AAA
  AAA authentication enable console LOCAL + GANYMEDE
  authentication AAA ssh console GANYMEDE + LOCAL
  Console telnet accounting AAA GANYMEDE +.
  AAA accounting console GANYMEDE + ssh
  AAA accounting enable console GANYMEDE +.
  No vpn-addr-assign aaa

  I created the Shell profile so & given privilege 15 it.please find wink 1 similarly in word doc attached

  However, when I try to create the service profile I get the error message, please find snap 2 in word doc attached.

  Kindly share your expertise.

  Hello Dominic,.

  For authorization privileges to take effect, you must add the following command to your configuration on the ASA:

  AAA authorization exec-authentication server

  After adding it, the ASA will take into account the level of privilege that are sent by the ACS.

  Associated with the error you are getting on the graphical interface of the ACS, please make sure that you are using a browser supported for ACS 5.4 version based on the release notes:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Note: Please mark it as answered as appropriate.