urgent: cannot open a session to pass after the microsoft Radius for logon conf

Similar Questions

• cannot open a session - tried to remove the computer from a domain

  XP pro SP3-

  My computer was an area where I logged on using a card chip.  I remove the computer from the domain and use it at home.  In the network dialog box, I changed from one domain to a home network and restarted by fashion.  Now, it's starting to use CTRL-ALT-DELETE, then a username and password that I did not and I do not have the opportunity to specify a field or use the smart card.  Blanks do not work.

  I want to undo what I've done and join the field, I can use the smart card and unlock the computer.  Any ideas how I can do this?  I can not use safe mode or get to the command prompt.

  Thanks JW

  I went hat in hand for people to support admin area and after going through a long list of their combinations of name/pw super secret they have finally found one that worked and were able to reconnect to the field.

  I intend to set up a new user with local newspaper on but all first I have to work around security policies when they me reconnected to the field.  I plan to permanently remove this computer from their LAN, who has started all this in the first place.  Pain in the neck for policy all number, disables USB (kill all external drives, including the optics I) etc.  I can fix it everything that it (still) was not aware of this bump on the road when I tried to switch on my home network.

• cannot open a session; telling me that the password is not correct. do not have the password reset disk.

  We have microsoft vista and cannot logon - received messages saying the password is not correct Admin and the other account.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner

• Cannot open a session in analytics if the user is not mapped to the BIAdministrators group

  Hello

  I created a new user, lets say 'abc '.

  The issue I'm facing is: for the 'abc' user, I traced only groups 'Author BI' and 'BI consumer' as I forced her to test the SPR where I didn't that correspond to the BIAdministrators group.

  With the above user, if I try to log in analytics, I get the below error message:

  An error occurred during authentication. Try again later or contact your system administrator.

  When I added BIAdministrators group through the console of the 'abc' user, I am able to connect successfully.

  Is the same for all users by default those too - weblogic etc.

  But when I tried the same steps (not to add BIAdministrators group to a user) in the system of my colleague, its working fine.

  Could someone help me with this problem.

  I also checked privileges section to manage both the system and there seems to be no change.

  Thank you

  Srikanth.

  I found the answer on my own. It seems that the role of the authenticated user is not having access to the object.

  Therefore, open the RPD-> right click-> properties-> change permissions for the authenticated user to read field

  Deploy the RPD now.

  Problem solved.

• I installed a program of Turbo tax - cannot open to work with it - after the installation it does not open and is very confused "files."

  Help - it must be something very simple - unable to access the tax program Turbo - followed all the instructions and told me it installed - then he 'disappeared' - now in my program files and nothing does.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• administrator cannot open a session

  Administrator cannot open a session, each time I have enter password, returns, "THE service USER PROFILE SERVICE has no connection. User profile cannot be loaded. Help!

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot open a session

  I just start a new laptop and trying to get Outlook, Hotmail, I downloaded Live Essentials. In the context of that Skype has been installed. I already have it on my desk top so no not anything would be a problem.

  I am at the point of connection and when I used the same log-in under my desk, did not work. So clicked on password forgotten, changed. Tried to log in again, not good. Keeps asking for my Skype name. Have no idea what it is other than the login name or the name that appears at the top of the page on my desktop.

  No matter what I have / use, cannot open a session.

  Don't know what other information need. Give me an idea what to do.

  What exactly is the version of Skype installed on your laptop? In Skype goto help-> on Skype.

• Cannot open disk by double-clicking after Windows update

  Cannot open the drives by double clicking

  I use windows 7 and after that windows update today (KB2454826 and KB2419640), impossible to open the drives by clicking twice. However, I can open the discs in a right-click then click "open in a new window.

  I did a full scan.

  Hi Oxbis,
   
      
  1. what happens when you double-click on the HARD drive?

  I suggest you to install the updates one by one on your computer in a clean boot state, and check if the problem reappears.

  Download and save the Setup on your desktop package and try to install the same one by one and check what update is causing the problem.

  To do this, you must enter the number of the Windows Update in the search field in the link provided below.

  Link Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Refer to KB2454826:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ddafd2cb-022c-4235-a644-426ae6b6d36f

  Refer to KB2419640:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=3dfd4f1c-e7a5-4686-8d2c-b7a5a53c5333

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• l had express outlook XP with Firefox. cannot open a session to get or receive emails any ideas?

  Outlook express forum

  l had express outlook XP with Firefox.  cannot open a session to get or receive emails any ideas?
  As far as I KNOW, Hotmail has failed on OE for quite awhile.
  http://support.Microsoft.com/kb/878462
   
  For the best advice, Hotmail should ask in this dedicated forum.
   
  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• My CC icon, I cannot open a session.

  My CC icon, I cannot open a session. Says "Log In to continue" I connect with my credentials and he said "You have been logged Out", so I have everything again. It's a turning circle. Anyone else having this problem?  My connection works fine online.

  HELP PLEASE!

  Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

  - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

  - and the "loopback" https://forums.adobe.com/thread/1504792

• My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  Same thing here.  Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)

  I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies.  The system cannot find the specified file. "It started after restarting the Windows Update as well.  I imagine that the two are related in the same problem to iCloud.

• Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.

• Cannot make or receive phone calls after the upgrade to iOS 9.3

  Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

  SOLVED

  Went into settings,

  Cell phone,

  Cellular data options,

  then change the setting to EnableLTE OFF,

  It's for my at & t att, iphone 6 s

  No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• Cannot open my dynamics on my computer. the application is not compatible.

  Cannot open my dynamics on my computer. the application is not compatible.

  This is a forum intended for consumers.  You're more likely to get help from the Microsoft Dynamics community.

  Start here--> https://mbs.microsoft.com/customersource/Global/RMSPOS/support

  When you ask one of the forums, you have to mention what happened to your system, shortly before the problem started.