Pro 8500 A909g fax and scan number

Similar Questions

• HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

  I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

  Hello

  Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

  Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

  http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

  Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

  http://h10032.www1.HP.com/CTG/manual/c02668142

  To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

  Kind regards

  Shlomi

• Just save - unwritten - digital fax on OfficeJet Pro 8500 A909g

  I have the HP OfficeJet Pro 8500 A909g. I have the HP Fax in Digital Mode defined so that incoming faxes are saved on the network folder. Currently, when a fax arrives, it prints the fax and stores a PDF version of the fax in the network share. I don't want it to do both. Just save. Do not print.

  Is there a framework where we can prevent printing to save on paper (and ink)? I'd rather just browse my incoming faxes into PDF and only those that I really need to print. I like the option to turn off printing of incoming faxes and just store them on the network share.

  I did... took a while, but it's very simple, then it worked. All what you need to do is:-

  1 using the screen on the printer

  2. press on the key (top, middle of the screen)

  3. press on the basic Fax Setup

  4. digital fax

  5 fax print

  6. and finally click on off

  THEY're as simple as that. I was looking through the settings for centuries until I stumbbled on it. The hardest part about this process for me was getting through my exchange server... quite the task.

• Cannot fax Officejet Pro 8500 A909g; was recently sold by Verizon to switch to FIOS digital telephony

  Hello

  Recently switched to FIOS digital voice service. I have a HP Officejet Pro 8500 A909g. Y at - it a patch or other difficulty that I can use to send a fax? Receives errors in communication since going digital.

  Thank you

  Michael

  Fax is STILL an analog service, he may be able to work for DSL or VOIP, but it is never a guarantee. Unfortunately, there are no fixes, updated or newer models that will change this.

  You can try to contact Verizon to see if they have filters or suggestions, but it can never work with a digital line.

  I know it's frustrating, but there is not much that can be done. You can watch are E-fax to the square or a secondary analog line.

• MENU FOR FAX AND SCAN - HP OFFICEJET PRO 8600 MORE

  I find either my MEMU for fax and scan for my HP Officejet Pro 8600. This is the menu that allow you to select the type of scan (jpeg, etc.) and whether it's for email, files, etc. I don't know what is happening and I don't want to reinstall the printer.

  Any ideas?

  Hi containerpete and welcome to the forums of HP!

  I see that you are working with a 8600 Officejet who doesn't seem to have the scan/Fax options in the HP printer Assistant longer. I'm sorry to hear that, but I'll certainly do my best to help you!

  You can certainly just add the HP Scan icon on your desktop for the feature analysis on the computer, but if you need Fax options we then focus on the software uninstallation/reinstallation.

  For now, I'll explain how to add the icon HP Scan on your desktop (assuming that you are working with Windows 7) and if you want the instructions to uninstall/reinstall to see to get the other return options that I'll happily provide those in the next post

  To add scanning HP icon on your desktop click the start menu, click programs principally made, click the HP folder, click on the HP Officejet Pro 8600 folder and then right-click on HP Scan, click send to and select Desktop. Now you have a HP Scan icon on your desktop and actually save you a click or two

  Let me know how it goes, and if you want that the other instructions!

• How can I save the fax number of faxes sent in Windows Fax and Scan?

  Hello

  I sent a large number of faxes to my clients, (almost 3,000 faxes).

  But unfortunately, many fax numbers seem s be valid noy more.

  I want to save faxes (number, date sent, etc. like in excel tabel) but I do not know how?

  Is a way to save faxes sent in an Excel file?

  Thank you

  Richard

  Hello

  Unfortunately, the feature you are looking for is not available in Windows Fax and Scan. However, you can use your favorite search engine and look for a similar software that meets your need.

• remove 1 fax number from outlook to use the Windows fax and scan

  I recently bought a new computer with Windows 7 operating system.  I try to use Windows Fax and Scan to send a fax using my Outlook address book fax numbers.  When I enter the phone number in Outlook it shows as (281) 555-1212.  However, it converts the number of + 1 for each entry, regardless of how I implemented the rules of numbering or not.  Then when I try to fax, I don't need + 1 to dial numbers, only the area code and the number.  I can't do the 1 = go away.  If I dial the number directly in the Fax Wizard, and then it composes correctly, but when pulling starting from Outlook address book that's messed up.

  Basically, I don't have the + 1 to dial local numbers.  Only the 10 digits.  When I get a fax in Outlook number, it automatically formats it with the front 1.  I found an article online that said that if I put a comma before the number to 10 digits, it forces the computer to dial only the numbers that I entered.  It works fine when I do that, then my problem is solved.  Thanks for responding.

• HP OfficeJet Pro 8500 a909g - print from somewhere outside Tray 1

  Hello

  I am a consultant and one of my clients has this printer.  He has a paper tray, 250 sheets.  There's also the feeder on the top where you can feed the things to scan or copy.

  When he wants to print checks or envelopes, to remove the tray, take the paper and put in controls.

  Is it possible to print these one other way or you have buy the 2nd tray accessory?

  Thank you

  Hey texaspete,.

  The automatic document feeder on top of the Officejet Pro 8500 A909g can only be used for scanning/copying.  The mechanism for the loader doesn't have a printhead to be able to produce printed documents.

  However, there is the possibility of obtaining a 2nd paper for the Officejet Pro 8500 tray.  HP no longer produces the paper tray, but there are 3 third-party suppliers who still carry the part.

  * The part number for the option 2 tray (tray of 250 sheets) is CB802a.

  Try Google search for this product number and you will find many options of different companies.  I hope this helps.

• HP officejet pro 8500 a909g driver for mac 10.10.3

  Hello

  I am not able to scan/print through HP officejet pro 8500 a909g 10.10.3 Mac.

  I think because of no proper drivers, scanning/printing does not work.

  What should do?

  Hi @pan1490,

  Welcome to the HP Forums!

  I understand that you cannot print or scan with your HP Officejet Pro 8500 a909g on Mac OS X 10.10.3 Yosemite to. And I'm happy to see it for you!

  To verify that your printer hardware is functional, you are able to make copies of the scanner glass? Copy of a multi-page Original.

  If you are able to copy, then I recommend to install this driver, HP v3.1 for OS X printer drivers, which is the only driver I know for this printer on Mac OS X 10.10.3 available. Please see this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005. How to scan without HP on Mac software.

  Hope this solves your problem and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• OfficeJet Pro 8500 a909g wireless connection problem

  I have a printer wireless OfficeJet Pro 8500 a909g.  My PC is Windows 7 (64-bit).  Recently, the printer wasn't working reliably and we took to reboot our router frequently at the same time.  Router problems seem to be solved because my PC at home and the work laptop are well connected and running.  However, the printer would not work last night when I really needed.  The documents would appear in the queue, but never reach the printer.  Today, I uninstalled all the software of HP using the CD of origin and reinstalled all the latest software and drivers from hp.com.  Of course, I rebooted the printer several times during this process.  Using the Network Wizard wireless via the screen of the printer, I am able to locate my SSID and enter the WPA key.  The printer confirms that it is connected to the network.

  If my computer and printer are both connected to the same network why can't the HP software locate the printer?  Whenever I try to run the installation/Setup program it tells me that there is no HP printer on the network.  As I said, this printer has worked on this wireless network in the past.  I also downloaded and run the scan HP and difficulty of the program to see if she could solve the problem without success.

  Any other suggestions?

  Well, what I'm going to make you, it's just a basic uninstall and reinstall the printer. I'll describe the steps and you are right, we can use the USB > wireless Assistant. You can access that by running the software after the installation of the USB. Here are my steps...

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752459

  Install and let me know the result!

  In addition, here is how you set a static IP address: allocating an address static IP to your printer of HP Wireless - Windows 7 - YouTube

  Have a great day!
  

• AirPrint on HP officejet Pro 8500 A909G

  Is it possible to use AirPrint on a HP Officejet Pro 8500 A909g? Thank you

  OK, so a solution of firmware is released. The PrinterShare software solution is awkward. You can print to a printer that is shared by a Mac or a PC, but who wants to turn on their computer, whenever you want to print from iOS device? Given that I and everyone using devices iOS want be able to print natively and directly on a wifi printer, there are only two options left. Either you buy a new printer AirPrint for a few hundred dollars or more, or you buy the Lantronix xPrintServer for $150.

  http://www.Lantronix.com/it-management/mobile-print-servers/xprintserver.html

  xPrintServer is the solution I finally chose. It works as advertised. Simply connect it to your router, connect the power cable, and it works instantly. Almost no network printer, wifi or not, is recognized by AirPrint. Select your printer and print. So sweet!

• OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document

  I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.

  Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...

  Otherwise, I am very satisfied with the printer and everything works fine...

  Thanks for any help.

  iMac (Mac OS X 10.6.8)

  Hello

  I hope you feel better now!

  Please specify the exect option that you use to scan from the control panel of the device.

  What exect icon are you clicking after selecting the scam?

  If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:

  Click the Apple icon, then software updated. Be sure to select any update HP available.

  If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Download and install the latest driver below:

  http://FTP.HP.com/pub/softlib/software11/COL34340/MP-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74.dmg

  Finally, update the latest driver by clicking the Apple icon, then software updated.

  If you use another method of scan, please specify which option you use.

  Kind regards

  Shlomi

• Windows Fax and Scan "Sender Name" empty (Windows Server 2008 Standard)

  Hi all

  I am using Windows Server 2008 Standard (32-bit) with a RocketModem III card.  I have the latest drivers for the RocketModem.

  Using Windows Fax and Scan, I can send and receive faxes fine.  The only problem is when I see the fax, the name of the sender is blank.  I am trying to display the telephone number that someone sends me the fax to.

  I had thought it might also be under CSID, but everything I have complete options because it puts there.  I guess that means I want the CSID show for all those who sent faxes to me.

  It might be worth noting that I have active CallerID and you have a real fax machine that shows the incoming number very well.

  Does anyone have an idea where I could go wrong here?  Thanks in advance for the help!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows fax and scan without adding contact

  I use Windows Fax and Scan to send a quick fax to someone.  In the dialog box "New Fax", you can enter a name of my address book Outlook or to a phone number.  I would like to enter a name and a number for someone who is not in the address book without having to create a contact for them in the address book.

  The cover page editor allows me to insert the two {name} and {recipient Fax #}, so I expect to be able to enter this information when I send the fax.

  Thank you.

  JerryK

  You do so by using a one-off Fax address as indicated in this article:

  How to use the Windows 2000 Fax Service to initiate a mail merge in Outlook 2002
  The names that you insert in the cover page editor cover fields in your address book to be filled in by the address book when you select a default contact.
  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com--KVOA TV, Tucson, AZ.

  Concert at the Hot Licks - www.badnewsbluesband.com

• Windows Fax and Scan does not appear in the start menu

  : I'm using Windows Vista Home Premium and you want to (a) send faxes via a modem local fax and b scan docs from a local scanner. I mean, there should be a program Windows fax and scan shown in the start menu. I clicked all programs on the start menu, and it doesn't always show. Suggestions?

  From: Hal

  Fax and scan is available in Windows Vista Business and Ultimate editions, it is not available in any of the Windows Vista Home editions.  Since you have a version of Windows Vista Edition family, the only option of fax is a third-party product.  These products work under Windows Vista:

  Snappy Fax

  http://www.snappysoftware.com/

  RKSFax

  http://www.rkssoftware.com/rksfax/overview.html

  VentaFax

  http://www.VentaFax.com/

  FaxTalk FaxCenter Pro 7.5

  http://www.FaxTalk.com/products/ftfcp/index.htm

  I have seen reports that the free version of BVRP also works with Windows Vista:

  http://www.usr.com/BVRP/bvrp.asp

  BVRP PhoneTools

  Given the above comes with the new USR modem, I don't know if it will work with no - USR modems.  Alternatively, you can send faxes via your Internet connection provided you are willing to pay for an Internet E - Fax service:

  http://www.slipstick.com/AddIns/services/fax.htm#internetfax

  Personal Fax Services - Internet Fax

  http://www.Savetz.com/fax/

  Another response of the community of Windows Vista discussion groups