probably possible shipping date

Similar Questions

• How to upgrade the shipping date of calendar on order?

  Hi gurus,
  
  I want to update the shipping date of calendar on order lines with the information I get from our truck company, this must be done before we get in fact file of confirmation of the ship and ship use confirm API. Is there an API specifically or any fucntionatility I can use to update just the expected delivery date until we ship actually to confirm the order. Appreciate your help.
  
  Thank you-
  REDA

  OK - I understand now.
  What is the shipping company send you a flat file with No order and expected delivery date?

  The API call is generally the best way to treat it. It is perhaps not all that complex to use. Load the flat file into an intermediate table. Plan a customized program that will read the data; validate and call the sales order api.

  The Deputy is an update direct does not support the oe_order_lines_all. Given that you use any other features in Oracle as the MRP reserves or forecasts of consumption etc, such direct update may be safe, but it comes with the usual disclaimers.

  Why do you want to avoid the api?

  Hope this helps,
  Sandeep Gandhi

• my e-mail messages now all the data the path below the shipping date. The path data also appears when I send a message. How to disable this option?

  Here's what I see below the date. This problem just started a few days ago. I must have turned on something in my settings but I've searched and can't find what it is.

  Message transferred-

  From: 57 2015 <>
  X key account: account 1
  X-UIDL: 11e5-690d-7a459b6a-9997-002128145bba
  X-Mozilla-Status: 0000
  X-Mozilla-Status2: 00000000
  X-Mozilla-keys:
  Status: U
  Return-Path: < [email protected] >
  Received: from carlin.mail.atl.earthlink.net ([207.69.200.104]) by mdl - gnash.atl.sa.earthlink .net (of EarthLink SMTP server) with SMTP id 1zI0PI6Hs3Nl3710; Friday, October 2, 2015 09:57:10-0400 (EDT)
  Received: from boell.org ([62.96.251.171]) by carlin.mail.atl.earthlink.net (SMTP of EarthLink server) with ESMTP id 1zI0PF4wg3Nl3q80 for < [email protected] >; Friday, October 2, 2015 09:57:08-0400 (EDT)
  Received: from gate_dom-MTA by boell.org with Novell_GroupWise; Friday October 2, 2015 15:57:07 + 0200
  Message-Id: < [email protected] >
  X-Mailer: Novell GroupWise Internet Agent 14.0.1
  Date: Friday 2 October 2015 15:56:41 + 0200
  From: < [email protected] > Nelson Mackenzie
  To: [email protected]
  Subject: Re: update/invitation
  References: < [email protected] > < [email protected] >
  In-Reply-To: < [email protected] >
  MIME-Version: 1.0
  Content-Type: multipart/mixed; Boundary = 'is __PartB483E109.0__ is'
  X ELNK-receipt-Info: spv = 0;
  X-authentication-results: dkim = "failed"; (2:no or failed processing dkim); dMarc = "none"; (1) ; DWL = 'miss '; den = "not exempt".
  ELNK-AV: 0 X
  X ELNK-Info: sbv = 0; sbrc =. 0; SBF = bb; SBW = 000;

  You can see the full headers.

  You can change this option to view only the data OF WORMS regular Date topic.
  'View' > 'Headers' > 'Normal '.

• New on Vista Upgrade shipping date!

  Hello world

  I just posted order for my vista upgrade shipping, shipment be will take about 3 weeks.
  Seems the news of some sort.

  Thanks for sharing this info with us, I already read similar statements. It seems a normal delivery time for moduslink.

• Expected shipping date

  Where is the best place to find out how the estimated delivery date is generated automatically?    and what affects the date that is filled.

  Hello

  Please see the bulletin Note: R12 planning management of orders (Doc ID 1551848.1)

  Concerning

  Avanti

• Ship Date Version of Flash Player 11.6?

  Hello

  There is an integration of Chrome bug we noticed in the forums is fixed with 11.6 version of Flash Player.  What is the current target for delivery of the release build 11.6 date?

  We cannot comment publicly on relase future dates, sorry.

• Creating vector shapes of... possible pixel data?

  I never really HAD to do that before, so I don't know how easy or difficult it is... but I want the direct HIT, I applied to a text I wrote to become its own vector form.

  The option "create layer" will create a physical layer of the effect of the RACE, but he will be given in pixels. Which means I can't resize at leisure as I can the text layer itself.

  I thought that maybe I could create a pixel of the FX layer, then converts that into art online via unknown command as-of-yet PS could have in his bag. Unless there is a still more direct way to do... ?

  Window > paths

  

• Primary school ceased to redo data on the site of watch on the ship

  Hi all;

  Primary database suddenly stopped shipping data recovery to the backup site.

  No network problem. (the two are able to ping)

  > > Main site

  SYS > SELECT STATUS, GAP_STATUS FROM V$ ARCHIVE_DEST_STATUS WHERE DEST_ID = 2;

  STATUS GAP_STATUS

  --------- ------------------------

  ERROR CAN BE RESOLVED GAP

  SYS > display the parameter log_archive_dest_2.

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  string log_archive_dest_2 = "stby_crmsdb", delay service LGWR ASYNC NOAFFIRM = optional compression 0 = enable max_failure = 0 = 1 = 300 reopen max_connections db_unique_name = "stbycrms" net_timeout = 30, valid_for =(all_logfiles,primary_role)

  SYS > display the parameter log_archive_dest_state_2.

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  LOG_ARCHIVE_DEST_STATE_2 string ENABLE

  SYS > select thread #, max(sequence#) from v$ archived_log group thread #;

  THREAD # MAX(SEQUENCE#)

  ---------- --------------

  1 15014

  
  

  > > Site of sleep

  SYS > select thread #, max(sequence#) from v$ archived_log in case of application = 'YES' group by thread #;

  THREAD # MAX(SEQUENCE#)

  ---------- --------------

  1 14996

  SYS > select nom_dest, STATUS, TYPE, SRL, DEST_ID, RECOVERY_MODE from v$ archive_dest_status where dest_id = 1;

  DEST_ID NOM_DEST STATUS TYPE SRL RECOVERY_MODE

  ---------   -------------------- --------- ------- ----- ----------------------

  APPLY 1 LOG_ARCHIVE_DEST_1 NO. MANAGED IN TIME VALID LOCAL REAL

  Primary database alert log shows error as msg

  ORA-00604: an error occurred at recursive SQL level

  Heartbeat PING [ARC4]: Unable to connect to the day before "stby_crmsdb". The error is 604.

  Thank you.

  If you open the database read-ONLY the trigger is activated. But if the action of the trigger requires that all WRITING, then it generates an error.

  Don't forget the primary/secondary test where you connect as SYSDBA primary waiting and intelligence in primary. If when you try to connect the connection fails because the logon trigger fails, then connects stop moving and you get a delay until you correct the problem.

  Oracle notes that can help:

  Creation of trigger connection on the primary database, we get errors on physical standby 604 - ORA ORA-1552 (Doc ID 785885.1)

  PHYSICS: ORA - 604 ORA-16000 pending open read-only (Doc ID 730659.1)

  Interesting question, happy he came again because I almost forgot this one!

  Best regards

  mseberg

• How to know the date Acual shipping in the sales order

  Hello
  I want to know the actual shipping date on command.
  please me hepl
  Thank you
  REDA

  917419 wrote:
  Hello
  I want to know the actual shipping date on command.
  please me hepl
  Thank you
  REDA

  Go to the line which is shipped--> take action for additional online information... go to the delivery tab to see the dates of departure and arrival

  HTH
  Mahendra

• Download Manager: is is possible to cancel a download and not delete the partially downloaded file?

  There seems to be no way to change the default behavior for the Cancel button the Download Manager.

  I would like to be able to break a download link without losing what I have downloaded so far.

  At the moment to achieve, I stop the download, move the files, and then cancel the download. It of messy and got to make mistakes in the past.

  Thanks for your suggestions.

  You have changed the investigation once more.

  • "If you state categorically that Firefox will remove always download files when you press the Cancel button, I will mark this topic resolved."

  That seems unlikely,
  and in a certain extent depend on system set-up, and for example if you download to a temporary directory, regardless of what Firefox does or not doing the files will be probably deleted a date closer.

  The above is another question, but again, you have asked initially

  • "I would like to be able to break a download link without losing what I have downloaded so far."

  Sometimes, it is possible.

• variables of user-defined data transfer

  Hello

  I use the etherCAT 9144 chassis and is only supported by this hardware FIFO range target. After a search, I realized that the only way to transfer data from FPGA to the host by using user-defined variables. But these variables do not support the notion of FIFO. So which is the best practice to transfer data after measures (provable 10 Hz measurement of 15 values) to host VI?

  Thank you

  As mentioned, the 9144 only supports the analytical engine.

  In regards to what you do, it really depends on the entire application. For example, what is the master? Are there other systems at issue here? Etc. It's a good read, in general, although it might not help this second right: http://www.ni.com/white-paper/14151/en/

  A high level, you need to decide what you need. If you have need for deterministic communication, low-latency over long distances from a RT controller, the 9144 is probably the right choice. If you need low latency + streaming over short distances to a RT controller, you should look into the RIO MXI chassis. If you need mainly not deterministic low speed (10 hz) data mixed with low flow continuous over long distances to a windows or host RT, then ethernet expansion rio (9146,7,8,9) is probably the right choice. If you need high speed continuous with low control latency over long distances to a windows or RT host, you need a full cRIO controller. Based on what you've posted so far, its uncertain is the right person.

  Lets say you're stuck with the 9144 for now. As you can easily hit 1 kHz scanning cycles, it should be perfectly possible to data 'stream' to 10 Hz. If you run the scan at 1 kHz engine, then you are 100 x oversampling. Where it gets complicated is this requirement of sync. By default, acquisition input/output is synchronized to the clock of the scan (and you can see when the clock of scan is set by a knot of e/s FPGA). However, you can take complete control of a module in the FPGA and read inputs and outputs at any time if you please. In other words, you can set up so when DIO0 goes high you immediately enjoy all the values of AI 15. You can then transfer these values HAVE switched to the host using the user-defined variables.

• Unexpected end of VI after the acceptance of 3 lines of values from a serial port, transmitting continuous data.

  Hello

  I am currently working on the acquisition of data from a unit of 2 balls of hair, installed with a Zilla controller on an electric vehicle. Hairballs allows other devices to the device through a serial port. The option of data acquisition for displays information like speed, tension etc.

  I use Teraterm, a terminal Communicator to start communication with the device of hairballs. After having sailed in the various menus, I can access the DAQ feature that provides data continuously to the status of the various components of the vehicle. I saved the logfile of teraterm (Teraterm - Results.txt). 5B 01 0b C8 03 53 02 39 27 OMFS is, for example, a sample of data from the module of data acquisition.

  When the port is configured to send these data, I close the program Teraterm and run the LabVIEW VI (read and Write.vi series). It accepts 2-3 rows of data (error LabVIEW - 2.jpg In Motion) and then stops. I know there is a message of error involved, but I think that its storage in what concerns the information in the file (this is another problem, I need to resolve, the file is always empty).

  Could someone help me with this problem please. Why the software ends the execution after only 2-3 loops. Sometimes he starts to accept data from the middle (@ 1 0b C8 03 53 02 39 27 OMFS for example) and stops after displaying the it.

  If there is information required please let me know.

  Thanks in advance.

  The error you get is:

  1073807252

  VI_ERROR_ASRL_OVERRUN

  A time-out error occurred during the transfer. A character not read in the material before the arrival of the next character.

  Your buffer is probably full of data.

  See here and here for possible solutions.

• How to format the data back of JMX

  I want to fomat dates back to JMX on foglight Server (5.6.5).

  "Ex: convert date format 'long' ' String (PST).

  Also, can I format the data on the dashboard in a different format?

  Ex: Covert "MM/DD/YYY" to "DD-MM-YY".

  I am unable to make use of 'Deriverd' but you need to know if it is possible for data formatting with out creating "Derived Metrics"

  Thank you.

  As usual, in Foglight, there are several ways of doing things, and most things are possible.

  Remember that the date you see is probably not a string format, but a java rendering Date (similar to what you see) or Timestamp objects.

  What you are looking for on a dashboard is a different rendering engine, an object that converts the presentation of the data from one format to another.

  There are many kinds of converters that come with Foglight, including fully customizable Date converters.

  The model on a Date Converter personal property can be used to do almost anything.

• How can I have with these positions columns in MY EMAIL IN BOX: FROM, to, SUBJECT, DATE SENT

  I have columns with the following headings in MY Inbox

  DE TO TOPIC Shipping DATE                 

  Depends on your e-mail client, but probably yes.

  If you use Windows Live Mail (for example), just go to your Inbox, right-click FROM or TOPIC for example, click COLUMNS. Then check the boxes you need I.E. '.

  Once the 'TO' column is listed just click to select it and drag it into the order that you need them.

• Date rule

  I would like to create a rule where a date attribute cannot precede another attribute date 30 days otherwise it won't.

  For example: I have two attributes 'date', 'delivery date' and the 'sample date"... the person meets the requirements if the date of the sample above not more than 30 days before the shipping date.

  How I wrote this in OPA?

  Thank you!

  Heather

  Hi Heather,

  Almost everything you want to do with dates can be done with one of (or often a combination of) date functions: Oracle Policy Modeling User Guide

  For your particular scenario, there are a couple of ways to do it. Here are a few ideas...

  You could use 'AddDays' function to find the date 30 days prior to shipping date and compare the sample that date:

  the sample meets the requirements of date if

  .. .the date sample > = AddDays (date of shipment,-30)

  Or you could use one of the DayDifference functions to count the number of days between the date of the sample and the shipping date and compare that to 30:

  the sample meets the requirements of date if

  ..... DayDifference (the date of the sample, the shipping date)<=>

  And don't forget that you can add intermediate attributes so that the record of decision is clearer and more informative, for example something like that will probably give a much more informative than the above examples decision report.

  the sample meets the requirements of date if

  .. the number of days between the date of the sample and the shipping date<= the="" maximum="" number="" of="" allowable="" days="" between="" the="" sample="" date="" and="" the="" shipping="">

  
  

  the number of days between the date of the sample and the shipping date = DayDifference (the date of the sample, the shipping date)

  
  

  the maximum number of days allowed between the date of the sample and the shipping date = 30

  (Note: I just write these on the top of my head without trials, so I may have missed something, so of course test by yourself.) I'm really just give some ideas here).

  See you soon,.

  Jasmine